Maxx 4S Hot Racing Aluminum Servo Saver Bellcrank Steering Upgrade!
Hot Racing Upgrade Parts!
#traxxas
#traxxasmaxx
#traxxasrc
See too:
How to upgrade the steering Bell Crank for Traxxas Maxx: • Traxxas Maxx 4s with S...
How to upgrade the rear Traxxas Maxx with the rear Traxxas Sledge Shocks: • Traxxas Maxx 4s with S...
Traxxas Maxx 4s with rear Traxxas Sledge 100% tested: • Traxxas Maxx 4s with S...
Traxxas X MAXX Telemetry with Traxxas Link: • XMAXX 8S Telemetry wit...
Arrma Granite 4x4 blx with 17mm Hot Racing Adapters: • Arrma Granite 4x4 blx ...
Пікірлер: 24
Thumbs up from the Hot Racing help desk! I'm always seeking good instructional vids for my customers. Feel free to send me links, I may send viewers.
@josephsrc
Жыл бұрын
For sure! This is another tutorial for the Hot Racing 17mm adapters for the Arrma Granite 4x4 blx kzread.info/dash/bejne/n6qWy5iGqNKddMo.html
thank you so much!
@josephsrc
10 ай бұрын
Glad to help! Thanks for watching the video and comments!
Worth noting the silver spring is stiffer. And i also noticed with vitavon toe end i needed to put shims inbetween, because when you tighten the screw it would bind the linkage.
You have a great looking truck and we appreciate you trying to do a video to help everyone. I just wish you had better lighting and the camera was positioned differently so we could see everything. Best of luck and again thanks for trying.
@josephsrc
10 ай бұрын
I'm making some changes to help you with a better lighting area. Thanks for watching the video!
I use hot racing products also. I recommend getting some better light over your workspace and editing out the removal or installation each screw. I’d like to see what you try next on your maxx
@josephsrc
Жыл бұрын
I’ll continue working on my Maxx ! You can find another video for the Maxx in my channel!Thanks for the recommendation!
Great vid man. Im wanting to switch to s hot racing savor and also a standard size servo to my maxx v2. Any other mods I need to make this work?
@josephsrc
Жыл бұрын
I changed mine to a standard 1/10 scale servo and another upgrade is the Traxxas Maxx front-toe link for Wide Maxx because the plastic ones bend over time! If you have more questions, feel free to ask! Thanks for watching the video!
I found the tension screw needed some loctite because it kept backing off on me and eventually the truck wouldn't turn at all because the bellcrank was so loose.
@josephsrc
Жыл бұрын
The loctite works when you put a screw into metal or aluminum!
@Smokey00
Жыл бұрын
@@josephsrc works with plastic as well
@josephsrc
Жыл бұрын
@@Smokey00 the plastic sometimes works without loctite because the metal screws get tight into the plastic
Thanks for the video. How are you liking it?
@josephsrc
Жыл бұрын
The upgrade is fantastic and it helps not only with durability and also improves my steering when combined with a better servo! Thanks to you!
@DerekRC
Жыл бұрын
@@josephsrc gonna order one. 👍🏻
@josephsrc
Жыл бұрын
@@DerekRC Hot Racing always has good quality parts for almost every RC!
@ajridesandmore5632
Жыл бұрын
So the bell crank w/ servo saver works out the box on a standard servo or did you have to buy a different version other than the maxx one?
Any issues with this so far? Ever since I put these my stock servo gears are getting stripped. Edit : I've kept these on the loose setting.
@josephsrc
Жыл бұрын
Hi I have no problem since I installed itI have the servo no so tight but you can use a little bit of thread lock to avoid getting loose. Hope it helps!
@markc3571
11 ай бұрын
You can see in his video that he does not have a stock maxx servo
@josephsrc
11 ай бұрын
The servo bell crank is supposed to fit the stock servos and standard servos. Make sure that you use stock servo with the stock servo link and don’t exchange with a standard one. Hope it help!