Between you and Kevin, you guys built a wicked system!!!

This is brilliant! Look forward to seeing more videos.

@LexusOverland

2 жыл бұрын

I appreciate the support!

Awesome! Looking forward to the next one 😀

@LexusOverland

2 жыл бұрын

Thanks homie! Same! 🤠

Great video! Got gifted one of those compressors from a neighbor and it had the switch attached to the line. Going to rebuild it to your spec as it looks much stronger. And a simple yet effective 4 tire hose setup. Thanks!

@LexusOverland

Жыл бұрын

Hey thank you! I appreciate that. Enjoy the build!

AWESOME brother!!! That is some nice inspiration you got there!

@LexusOverland

2 жыл бұрын

Thanks homie! Appreciate ya!

Thanks! Newbie and just getting started. This will go in my library!

@LexusOverland

2 жыл бұрын

Love it! I had a blast building mine - and it’s really super easy 🤠

Nice job, brother! The 🐐🐐🐐!!!

@LexusOverland

2 жыл бұрын

No u

Great video! This is on my list

@LexusOverland

2 жыл бұрын

Thank you! Good luck! 👍🏼

best way to add the pressure safety, thank you! I'm using the 2nd reducing bushing to keep the factory tail & connector; that' how I have setup all my extension hoses.

@LexusOverland

2 жыл бұрын

Nice work!!

Instead of just a pressure switch you can buy a combination pressure switch/ unloader valve so that the compressor doesn't start under load, which I'm sure is why a lot of compressors tell you to have the compressor running before hooking to the tires. The unloader switch is bulkier but will help the compressor live longer

Good job bro!!!!

@LexusOverland

2 жыл бұрын

Thanks homie 🤠

I made a 4 four wheel inflator/ deflator many years ago. I used a pressure regulator just before splitting off to the tires. I valved the splits off and set the pressure I wanted to inflate to, then opened the valves. I could inflate to where I wanted without having to monitor it.

@LexusOverland

2 жыл бұрын

Nice! That's awesome!

i have a smittybilt air compressor with a janky fitting, i need to get that replaced with more standard connections. Thanks for this vid

@LexusOverland

2 жыл бұрын

Ooo that’s gonna be a great upgrade! Appreciate the comment!

Awesome! I’ll likely do this to my other compressor! Thanks for sharing.

@LexusOverland

2 жыл бұрын

For sure! The principle should be the same - splicing the pressure switch in between the on/off switch and the circuit board. I should have mentioned it in the video that the pressure switch just works by cutting continuity when the upper pressure is met, and restoring continuity when the pressure is relieved. Super simple and great!

I fixed my car and my wife’s car with this video. Thank you so much! We can afford to go on vacation now!

@LexusOverland

2 жыл бұрын

Incredible. Enjoy your vacation sir 🤣

@BoomyTheGoblin

2 жыл бұрын

How did you fix a car with a compressor mod?

@LexusOverland

2 жыл бұрын

His secondary air injection pump went out and he rigged this to work in replacement. Pretty cool stuff!

Great video! Keep them coming👊🏼 #NINE8LC

@LexusOverland

2 жыл бұрын

Thanks man!! Much appreciated!

Hell yeah I just put some STT Pros on my 100 series LC

@LexusOverland

2 жыл бұрын

They’re too dang good 👏🏼

That pressure cutoff switch is great. Wondering if I’d be able to do the same thing with the viair 400p, mistakenly bought the non-automatic one and have been too lazy to return it 😅

@LexusOverland

2 жыл бұрын

You sure can! Just find the wire from the on/off switch to the circuit board and splice it in. I’ve heard of people doing it on others. Do it!

I saw Kevin's video before yours, but I really appreciate some of the tips you gave. Like the Napa rewards, as I was able to order one under $100, tax included. One thing I can't decided on is the pressure gauge. Should I get a digital or analog one?

@LexusOverland

2 жыл бұрын

I appreciate that! Kevin’s video is awesome. Nice work on getting a good deal! I have an ARB digital tire inflator and it’s been great for the year or two I’ve owned it. My logic for getting analog is that it will always work. Never have to worry about batteries or anything weird. If you’re not out in the boonies frequently I’d go digital. Otherwise, analog is the safest bet!

“Doesn’t look like the nipples I’m used too” 😂😂😂

@LexusOverland

2 жыл бұрын

😁😁

Thanks for the video and great you gave credit to Kevin as well! I just purchased this compressor and seems to be awesome for the price we'll have wait on longevity. I am interested on the pressure switch, but I am not too sure if it is healthy for the compressor due to its design as it will pressurize the heads and seals while on standby. Not an expert on the subject, but is just an idea! Any opinion or anything that you might know about it? Thanks again!!

@LexusOverland

2 жыл бұрын

I appreciate the kind words! Thank you! Ideally you will only have the compressor pressurized momentarily. As soon as you disconnect the air hose it will relieve pressure. It is very normal for compressors to build pressure and hold it, such as in a shop situation with a larger compressor, so I doubt it will make a large impact on the lifespan of the compressor.

@kewkew2

2 жыл бұрын

Where did you purchase, do they have more? I'd buy one from you they are sold out here

Awesome video, exactly what I was looking to do since I dont have the tools (or desire) to do the in-line drill solution for the pressure switch a lot of others have done. Do you mind sharing what lengths you cut the hose for each section?

@LexusOverland

Ай бұрын

I based my lengths off of the video referenced! If I recall correctly, he has a basic formula for calculating lengths from your wheelbase

👍🏼👍🏼👍🏼

Hey I appreciate the video and links for the parts! I'm going to build one myself. Do you have a link for that nice valve on the manifold?

@LexusOverland

2 жыл бұрын

I appreciate the support! Good catch - I completely forgot to add it! Thank you for pointing that out. I have added the link to the description and copied it below! amzn.to/3yxxETF

I saw in another video that the positive leads on their pump had wire strands pocking through the heat shrink ... I just picked up one of these and pulled the cover to find the very same. I would advise this to anyone before using to check these wire leads and re-wrap if necessary. NAPA needs to require the manufacturer to better their QC.

@LexusOverland

2 жыл бұрын

Yup, that’s the video I referenced. You don’t get better QC at $114 a compressor unfortunately! Lol

OVERLAND!

@LexusOverland

2 жыл бұрын

WOOOOO

What size wire did you use to connect to the air pressure switch?

@LexusOverland

2 жыл бұрын

I believe a 16 gauge? It’s not super crucial to be a thick wire as it’s just a signal wire to switch the compressor on or off. It intercepts the factory wiring - so you can match that!

What size pinch clamps did you use out of the set? Thanks.

@LexusOverland

2 жыл бұрын

I’m traveling for the holidays so I won’t be able to check the dimensions for a bit. But I used the clamps that just fit over the hoses. There were enough in the kit to do all the clamping I needed!

More vids please!

@LexusOverland

2 жыл бұрын

You betcha!!

I am looking to hard mount this compressor. Can it be ran on its side?

@LexusOverland

2 жыл бұрын

I believe you are able to mount it in any orientation because it is an oil-less compressor!

CACHUNK!

Hi may i ask why when i do mine the pressure switch doesn't work at all i have tried different switch but i dont have a good luck, any reason why it doesnt work for me? :(

@LexusOverland

6 ай бұрын

Are you certain your wiring is correct? I’d double check that!

How much did you cost for the 4way inflator?

@LexusOverland

2 жыл бұрын

Cost was around $100, give or a take a bit. I purchased other items at the same time. I did link every item in the description so you can add them all up on Amazon!

What size pinch clamps did you use ?

@LexusOverland

2 жыл бұрын

I can’t recall the exact size, but the kit I purchased had a clamp that was just a little larger than the outer diameter of the hose I used. Worked like a charm!

Is the small Red wire going into the motor a thermal overload?

@LexusOverland

2 жыл бұрын

Unfortunately I am not familiar with the circuitry beyond where to intercept for the pressure switch!

@ken-w

2 жыл бұрын

@@LexusOverland I found that it is a thermal overload switch.

@LexusOverland

2 жыл бұрын

Nice! Good find!

Does it have VTECH?

@LexusOverland

2 жыл бұрын

… yes, yo 🤪

What is the range of that pressure switch?

@LexusOverland

2 жыл бұрын

It’s a 90-120 psi switch - it’ll shut off the compressor as soon as it hits 120 psi, and when you open the air valve it immediately kicks back on as the pressure drops below 90. Works perfectly and 120 psi does not seem to stress the system at all. You could purchase lower psi pressure switches if you’d like!

@irwinjimenez

2 жыл бұрын

@@LexusOverland Thanks. I just ordered the exact same compressor, being delivered in 1 week. I'm doing the same upgrades you are, so thank you.

@LexusOverland

2 жыл бұрын

Hey that’s awesome! Good luck! I’m happy I could help!

The air output on mine isn't 1/8,bigger but not 1/4 either

3min for all 4 tires?

@LexusOverland

7 ай бұрын

Hell yeah brother

Reported this for porn. Awesome job there brother.

@LexusOverland

2 жыл бұрын

Aww shucks 😁

Man I can't find these anywhere, every NAPA IS sold out of them, even online😟

@LexusOverland

2 жыл бұрын

Yeahhh apparently they’re completely sold out. The awning did come back after being sold out forever so maybe the compressors will too!

@kewkew2

2 жыл бұрын

@@LexusOverland Bro thanks I went online and finally got that awning It's been missing out of stock for months

@LexusOverland

2 жыл бұрын

Hell yeah!! That’s awesome 👏🏼

"haus"

@LexusOverland

2 жыл бұрын

Hoss 😉

Would have been nice to see the actual modification of the pressure switch connection under to cover

@LexusOverland

2 жыл бұрын

I bet it would be - which is why I linked to a video that shows it 👍🏼

@twoallame

2 жыл бұрын

@@LexusOverland thanks, did not see that, thought you said he showed this on instatwat, did not hear KZread

@LexusOverland

2 жыл бұрын

@@mrmotofy I did do the modification lol

@twoallame

2 жыл бұрын

@@mrmotofy actually did it myself and it works great. The instructions were clear and concise

why can't i see lors coment

@LexusOverland

2 жыл бұрын

Must be a cool kid sorry

LETS GOOO!!!! First dislike!!!!

@LexusOverland

2 жыл бұрын

I live on haterade, bring it 🤣