Sans cette vidéo je n'aurais jamais pu utiliser mon drone. Je l'ai enregistré sur mon téléphone par sécurité. Indispensable, merci Without this video I could never have used my drone. I saved it on my phone for security. Essential, thank you.

Woah, this is crazy. I never had this problem. Definitely contact DJI. I hope the issue gets fixed soon for you man.

I got passed this by doing a bunch of things including 1) downgrading my RC firmware below latest 1.0 or 1.0.1 2) resetting my drone to factory settings 3) redownloading dji app and trying to connect at the initial screen 4) after resetting the drone a couple of times it finally appeared on wifi screen and then it worked via my RC Couldn’t have done without all the tips here!!

@tahersaifuddin7004

4 жыл бұрын

how do you downgraded the RC firmware...please reply asap

@laurentd.4473

3 жыл бұрын

@@tahersaifuddin7004 kzread.info/dash/bejne/omuNzqVro8mves4.html

I've had a problem to connect with RC cable, solved it by connecting RC cable to my iphone last. Set everything up and only after everything connect the RC cable and wait 5 seconds. Hope it works for you!

@AewonWolf

4 жыл бұрын

VADIM PRUZHANOV thanks, this solution just worked for me

@reyjoson

4 жыл бұрын

Will try this. I have same problem

Just got my Mavic Air two days ago and I'm having the same problem. The unit will connect at times and then lose signal 20 seconds after taking off and then I'm trying to reconnect sometimes through a whole battery charge. I've reinstalled the firmware and I've deleted the phone app and reinstalled more then a few times now. I've played with this trying to get it to connect for hours and then it will connect only to disconnect again once in the air..its funny none of the reviews that I watched on Utube from the guys who tests this Mavic Air has said anything about this connection issue.....they only talked about how great this drone is....I've messed around with this thing all weekend long trying to figure it out...I did get in some flight time too but the unit disconected from the controller as much as I've flown it...I would not recommend anyone buy this Mavic Air with the problems it is having.

SOLVED! I reseted the remote control firmware to version 1.00 and the linking works fine without any manual linking procedures. To do that please conecht your RC to your smartphone and turn both on. Once connected you will see automatically the mavic air start page by the dji4go app. Press and hold the options button (the tree horizontal lines) in the top right button. Wait until a new window appears with firmware and update information. Downgrade and wait. After downgrading turn of the rc. Turn on the mavic air and after the dji sound the remote control as well. You will see the green button on the rc a few seconds later. Please reply if it worked for you too. Thanks

@lucademaas1

5 жыл бұрын

I remembered my rc didn't work correctly anymore after the latest update of the rc.

@lucademaas1

5 жыл бұрын

1.0100 is also fully operational.

@shirleyvdwal

5 жыл бұрын

@@lucademaas1 Same problem here. When i want to downgrade its saying: "it takes 15 minutes to reinstall FW. During reinstallation, ensure the aircraft is connected and always powered on with the the battery over 30%. Do not exit or close DJI GO" But the problem is: i cant connect in the first place. Then how do i downgrade???

@lucademaas1

5 жыл бұрын

@@shirleyvdwal please connect the RC to the latest version of the Assistent 2 on your computer. Downgrade there. 😉

@john-sy6hd

5 жыл бұрын

TRIED WHAT YOU SAID AND IT WORKED,THANKS SO MUCH.

I got the same problem, today had to link the drone to Rc, took a few attempts. Works, but after i turn off the RC and Close App. To change a fresh batts, i hvave to link again. Could be the cablr im using? Been using almost 4 months the same cheap cable (ios device)

Any update? Was this issue ever resolved?

I am facing the same problem... Posted it in the DJI forum.

@edwardmalave25.

5 жыл бұрын

any update on this i see your comment is 1 year old but I'm having the same issue

Have you resolve this?

I've had my Mavic Air for a few months now and no problem...until today. Now mine is doing the above as well. For me, the problem didn't start until after I downloaded the Ryze Tello App a couple days ago and the Tello flew fine until today when craped out :( Then later today we had a sunset I wanted to capture with my Mavic Air. But no matter what I did, the Mavic Air wouldn't connect. :( Now I have TWO pricey paperweights

Just got mine and it won't connect to the remote. I'm probably going to return it.

This solution worked for me (Mavic Air): 1. Turn on both drone and RC 2. Press the flickering yellow light on the drone for about 3 seconds until you hear a short beep 3. Press the pause button, the fn button and the button under the camera button (on the right handside) of the RC simultaneously for about 3 seconds until you hear a set of short beeps 4. The drone and the RC are connecting while you hear beeps between 10 and 30 seconds. Good luck!

Having the same problem, only picked up my air 2 weeks ago and after selling my p4 I'm beginning to think it was a big mistake,,, cheapest remote dji have ever built

arrived this morning 4 flights now same problem NOT HAPPY will be contacting DJI very soon and they had better sort it. Its now several hours latter and i fixed the problem. I had put a micro sd card in that was not compatible

Had the same problem soon as i got my unit. I called the dealer 2 days later since linking the unit to the controller was intermittent at best. Dealer requested i bring back the unit for inspection. Three weeks later, they sent me a brand new set. Credit goes to DJI for keeping their replacement warranties intact.

@edwardmalave25.

5 жыл бұрын

What number did you call ?

I love you 🤟

I have had mine for about 6 months fly it every weekend and I have never seen it do that

@Mrawwwwwwesome1

4 жыл бұрын

its happening to me i need help

Change SD Card worked for me ... i don't know why but it worked

@karolinasramkova9901

5 жыл бұрын

Worked for me too!

i got a prolem in step 3, cant connect mobile controller

SOLVED - I reinstalled the app and used my iPhone charging cable from the RC to my iPhone and followed the instruction. It worked immediately.

@itsgussy

4 жыл бұрын

Markus Franzen you connected your iPhone charging cable to the USB in the middle of the controller?

@markusfranzen7958

4 жыл бұрын

@@itsgussy correct

Hi guys! I had the same problem and discovered that there is a problem with the remote control. At least in my case, if you enter the camera view with the controller turned on, and go to the Wi-Fi settings you will see what SparkRC says (and some numbers) you have to verify the name of the Wi-Fi signal of your Mavic air and change it, Do not forget to change the password too. so it match to the password that is on the drone, in the label next to the QR code.

@laksononpy188

2 жыл бұрын

the mavic air doesnt have this apparently

is this problem ever solved ?? I have the same problem I have tried every way but problem stay the same please help

I bought mine 3 days ago. Does the same thing then will randomly connect. Then next time i try use it i have to do the same thing all over again.

@RuffKutz

5 жыл бұрын

After firmware update things seem to be running smoothly and haven't had any issues since.

@jinkypanganiban5732

5 жыл бұрын

Did you you fixed the problem of your RC , I bought mine yesterday and I have the same problem , this is my first drone and I'm first timer fly a drone , what to do Dji .

So I made the mistake of pairing via wifi first. If you've done the same, try to power off RC and drone and then back on again. This worked for me.

@parammagix

6 жыл бұрын

no solution from DJI yet... no idea wat to do...

Happened to me also also. I noticed if i turn the drone on and let it sit for a few minutes then turn the controller on it linked faster

@soloimaji4880

4 жыл бұрын

Hi Jason. Did you find the solution?

@vensmendoza5006

3 жыл бұрын

@@soloimaji4880 change the cables

I dont know if it was this but. I press the pairing bottom of the AC about 30sec turn it off, turn on the AC turn on the RC( with out any phone attached ) press the sinc bottom ( one bep) and the 3 bottoms of the RC and it pair. I really have been fighting wt this for 2 dead batteries. hope it work for you.

@KyrieNene

5 жыл бұрын

Hi. Can u make a step by step pls.

Having the same problem. What have you done??

@OrlandoPrietoGoico

6 жыл бұрын

Unfortunately, no. After contacting DJI support, they gave me a repair case number, but I'm outside the US and sending it is going to cost me more than it's worth. I'm waiting for the next firmware update to see if it fixes it. In case it doesn't, I would need to send it in on my next trip to the US. Really disappointed with this experience.

@vgomezp

6 жыл бұрын

SITUATION SOLVED. ALREADY 2 USERS HAVE DONE IT AND WORKED. 1. RESET FACTORY SETTING ON THE MAVIC AIR. 2. DOWNGRADE RC FIRMWARE. 3. ALL THIS USING DJI ASSIST. IF RC IS NOT RECOGNIZED BY DJ ASSIST INSTALL PREVIOUS VERSION FOR DRIVER THEN THE LATEST ONE. 4. REMOVE BATTERY IN THE DRONE FOR 10 MINUTES OR MORE. LEAVE IT BATTERY LESS. 5. THIS IS THE MOST IMPORTANT STEP. CHANGE LOCATION. FEW MILES AWAY. GO TO A PARK. ANYTHING WITH MORE OPEN SPACE. 6. START DRONE AND PAIR GIVING THE NORMAL PROCEDURE. IT WORKED FOR ME. ALSO FOR ANOTHER MATE IN THE SAME SITUATION. AFTER THAT UPGRADE RC FIRMWARE.

@PierreLaguerre

6 жыл бұрын

Mine just exhibited the same issue after flying just fine in US and PR. I think the latest FW update screwed it up for me! Same issue you're seeing. I will be downgrading the RC FW as Victor shares below.

My mavic air no beeping push back button some time double beeping but deference sound I’m tiered

Решили свою проблему?

Hi Orlando. Did you find the solution of this problem? It same with my remote.

@bjikurdistanaras9704

4 жыл бұрын

i tried much time by the same way and it's done , i clicked light button of the craft several times without holding and it's done, how it's succeed i don't know 😂

@MrSingh-kn6yf

3 жыл бұрын

@@bjikurdistanaras9704 yes you are right my friend and I also did the same way l clicked light button few time and it’s connected. Thank you so so much mate

My won't turn on the 2 ligth and the botton do not work question how do i fix that

have you solved the problem?

@vgomezp

6 жыл бұрын

SITUATION SOLVED. ALREADY 2 USERS HAVE DONE IT AND WORKED. 1. RESET FACTORY SETTING ON THE MAVIC AIR. 2. DOWNGRADE RC FIRMWARE. 3. ALL THIS USING DJI ASSIST. IF RC IS NOT RECOGNIZED BY DJ ASSIST INSTALL PREVIOUS VERSION FOR DRIVER THEN THE LATEST ONE. 4. REMOVE BATTERY IN THE DRONE FOR 10 MINUTES OR MORE. LEAVE IT BATTERY LESS. 5. THIS IS THE MOST IMPORTANT STEP. CHANGE LOCATION. FEW MILES AWAY. GO TO A PARK. ANYTHING WITH MORE OPEN SPACE. 6. START DRONE AND PAIR GIVING THE NORMAL PROCEDURE. IT WORKED FOR ME. ALSO FOR ANOTHER MATE IN THE SAME SITUATION. AFTER THAT UPGRADE RC FIRMWARE.

Hi friend, do you still have your Mavic Air?

@JCGHDJ90

4 жыл бұрын

I tell you that I managed to link. That is why I ask you.

@magnardotavarez419

4 жыл бұрын

How? @juan

@JCGHDJ90

4 жыл бұрын

@@magnardotavarez419 1 Connect via wifi with the mobile 2 Once connected to the mobile, turn on the remote and connect the mobile (without disconnecting it from the wifi) 3 connect the controller from the DJI app and wait if it works. It worked for me

L accoppiamento l ho fatto in un altro modo ho collegato il cavo dall RC AL DRONE CON IL CAVO IN DOTAZIONE USB A MICRO USB C

I have the same issue, no help from DJI. Never buy this crap product anymore,

Same problem and I fixed it. SUPER EASY FIX. Here's what you do. MOVE. Move to a new location outside as far away as possible from any high tension (electrical) wires. Now try linking (connecting) again. If that doesn't work, restart everything, once again outside in a new location, and try again. Works for me everytime.

@BOAExplore

6 жыл бұрын

It's not working for mine. I have tried in a field in the country.. and again in a different field 40 miles from previous location. Still not working

Maybe it was allready paired? In that case: Hold the button on the mavic untill it beeps twice. Should connect with the controller now.

At least your aircraft its beeping! mine stop making the beep sound and can't link with the controller, i already send it to dji factory now im waiting to see how it goes! :/ i spent 100US to send the aircraft !!!! :(

@charlescertain7536

5 жыл бұрын

sent mine twice and they want me to send it again

hi to all the problem solved ! the problem happens after you try to use wifi only mode to solve it press parring button and hold for 35 sec release and recycle power on AC and RC do the parring again. the problem is the default CE mode of AC when you use Wifi only mode to prevent the problem change the mode to fcc custom channel . now the AC will be in wifi mode till you make RC relink procedure .

@sayetka

5 жыл бұрын

AC RC CE ????

@jwsmith601

5 жыл бұрын

@@sayetka AC=Aircraft; RC=Remote Controller. CE in this context, I'm not sure ...

@ronyronouk

5 жыл бұрын

Can you please write in human-friendly language instead of those AC, RC, CE type alien language?

Hello, my device has the same problem. Please let me know if you find a solution thank you

@mcr051581

5 жыл бұрын

Sahand Nikseresht i have the same problem

@lucademaas1

5 жыл бұрын

Try to downgrade the RC. Check my comment above. ;)

Same problem

Same Problem and i couldnt fix it

@soloimaji4880

4 жыл бұрын

hi Alper. Did you find the solution of this problem?

Very disappointed with this situation:(. DJI should issue new FW soon

@parammagix

6 жыл бұрын

same issue... my mavic air is just 4 days oldonly....no solution from DJI yet... no idea wat to do...

@sugarrrhigh

5 жыл бұрын

same here same issue

he problem happens after you try to use wifi only mode to solve it press parring button and hold for 35 sec release and recycle power on AC and RC do the parring again. the problem is the default CE mode of AC when you use Wifi only mode to prevent the problem change the mode to fcc custom channel . now the AC will be in wifi mode till you make RC relink procedure . lords the solution to the problem of not communicating the RC with the aircraft is this. checked

Same.. What a dodgy product

I have the same problem so what should I do??

Same problem here

I have same problem with my drone

@soloimaji4880

4 жыл бұрын

Hi Ian. Did you find the solution? I have same problem with my remote.

I had the same problem. I went to the local DJ repair service and they couldn't fix it. Then I went to this technician, it took it behind the wall and in two seconds fixed it! he didn't revealed to me how he did it….. But he said that it was because I changed the connection to the Wi-Fi. and also I heard the beeping behind the wall, so potentially understand how to fix it. so if the connection problem started after you used the smartphone to control the Mavic, then try this: turn on the Mavic and press the back button until you hear three beeps. only then try to link with the RC (as shown in the Instruction video). I'm not sure it will work, as I said that's what I heard happening behind the technician wall.

@fedesupi

3 жыл бұрын

If you hold the back button until you hear 3 beeps, you are telling the drone to go into gesture mode (to control it with your hands only). I don't think that will be the solution to be honest

i just got this stupid fucking drone and I'm frustrated as fuck tying to link it I'm gonna return that stupid shit and get the karma

confirm frequency settings

@TheTigerDogg

4 жыл бұрын

How? How do you confirm the frequency settings?

@adammckenzie1385

4 жыл бұрын

What am I to gain from this video...no audio...this is bullshit...

Same issue here did anyone figure out how this happened?

@SNAPSPACEpl

6 жыл бұрын

Insert or change a SD card. Missing or faulty SD card blocks the connection to the RC.

Same problem 😭😭😭

@vensmendoza5006

3 жыл бұрын

Change the cables

Solved

@arrisxdify

4 жыл бұрын

How did you manage to solve the issue?

@soloimaji4880

4 жыл бұрын

Hi Juan. can you share to manage this problem?

@JCGHDJ90

4 жыл бұрын

@@arrisxdify Solution: 1) Factory restore the drone on the PC (DJI Assistant) 2) Linck the drone with the mobile. 3) Turn on the remote and connect the mobile phone having the same link with the drone. 4) Try to connect the remote. It worked for me.

@JCGHDJ90

4 жыл бұрын

@@soloimaji4880 Solution: 1) Factory restore the drone on the PC (DJI Assistant) 2) Linck the drone with the mobile. 3) Turn on the remote and connect the mobile phone having the same link with the drone. 4) Try to connect the remote. It worked for me.

@JCGHDJ90

4 жыл бұрын

@Rhino Republican Entertainment Solution: 1) Factory restore the drone on the PC (DJI Assistant) 2) Linck the drone with the mobile. 3) Turn on the remote and connect the mobile phone having the same link with the drone. 4) Try to connect the remote. It worked for me.

i think you try much time to connect by remote as my experience i tried much time by the guidance way and it's done , i clicked light button of the craft several times without holding and it's done, how it's succeed i don't know 😂

such a waste of battery

This drone is trash I’m about to return mine

I hate silent videos! Can you not tell what you are doing?

why should I see this whole video? 6 minutes of failure. No fun for Orlando, but no interest fot me to.

I bought mine 3 days ago. Does the same thing then will randomly connect. Then next time i try use it i have to do the same thing all over again.

@mcr051581

5 жыл бұрын

StealthCamp i have the same problems

@mcr051581

5 жыл бұрын

I have the same problem...i need help

Same problem