Do a video where you take us through your collection of bows, seems like your getting stacked

If you aren’t using that 15 front bar, I’ll take it 😂 save me 300 bucks!!!

@JonahSantaMaria

Ай бұрын

Petition to get this guy the front bar ⬇️

@JohnyGoostree

Ай бұрын

Right

@FRG-OG

Ай бұрын

Yes ​@@JonahSantaMaria

@Ryhager

Ай бұрын

@@JonahSantaMaria we got the highlighted comment!😂😂 maybe Chris feels generous!

@Donkey-Butter223

Ай бұрын

Could you ever see yourself shooting an Elite?

My Lift 33 holds on target as good or better than any bow I've had. It really does feel like a target bow. It would make a great "do it all" type bow. I'm shooting 60#, 27.5" DL and getting 312 fps with my 305 grain Victory 3DHVs.

And ladies and gentlemen you can have the same set up for the low price of $5,000 😂

@house2249

Ай бұрын

Real

@extremesam9

Ай бұрын

$5000? You can get all of this for the low price of $3200-$3400😂😂😂

@poolnooodles

Ай бұрын

After tax the front and rear bar plus back mount are 1k..... don't think you are far off. Nice bow but getting out of hand

@brodymode3208

21 күн бұрын

Brother this setup is cheaper then my Hoyt Stratos setup it cost my 4,200 after tax this bow only costs about 3,500 after tax

I presently have a Phase 4 29. Shortest bow I’ve ever owned. Went to the shop I frequent, and took a Lift 33 off the shelf, had the Mathew’s/ Axcel 5 pin sight on it. Adjusted the sight for the 20 yard pin. Mind you, this is right off the shelf bow. Not tuned or anything. Shot lights out. I’ll wait till November to see what the new offering will be. If it’s going to be a shorter version, I’ll order the 33 Lift.

Thanks for doing this buildout - always super helpful hearing the reasons why you build the rigs you do

I just bought this bow today. Earth color limbs and riser. I am very excited for this fall. I usually like the shorter bow but the string angle fit my face perfectly with the 33.

I searched months for a Lift 33 fade to black earth and finally found one. I matched it with UV Slider and an Epsilon rest. I was surprised how light it was.

@dustinearnshaw4835

24 күн бұрын

Exact set up I have

“Always cut twards yourself kids “ -Chris bee Gotta love it 😂

im looking forward to snagging a lift 33 myself maybe next year. currently still loving my V3X 33.

+1 on Mathews releasing a 15" BL stab that isn't in the target lineup. 15 front, 10 back, great setup for the 33. Running a Lift 33 for a few months now. Performed great at TAC and shoots better than the V3X I owned

@bigz5262

Ай бұрын

Does the whole bar measure 15”? It’s probably closer to a 12” in other brands since it starts at the back of the riser instead of the front

Finally some more bow build vids!!!! 🔥

Love the lift can’t wait to get one

If only I could afford to have more than one Mathew’s bow. lol my phase 4 is an everything bow, hunting, target, and tac.

Sa Weet video goat….dont be affraid to “over do” your comments about what your doing while building the now though bud…for some this is new and knowing why your doing some things while building the bow is great information…I get that plenty have seen build videos and know..but they shouldn’t mind to much hearing it again…we just use the small stand that comes with the Garmin…placed on a counter top we shoot over it..less to store away inbetween tests…great video Chris….😊

I love my lift 33 with a UV 30 front bar with 4oz and a UV 12 rear bar with 9 oz. Holds pretty solid.

Awesome video and Build Chris!

I just bought my lift 33 today without knowing this came out…..perfect timing. I had shot rx-8 hoyt, trx 34 and an elite (forgot which one) and the lift was by far the best so I took it home….

man, that's a fast bow though. love the noise it makes. sounds solid on impact too. beautiful bow mate!

I ordered my lift 33 earth fade to black on release day and it came last Monday and I ran 15 AAE mountain series and 10 mountain series

Same colors I ordered mine in,bow is coming in next week

Love the vids man, big inspiration. keep it up!!

need to get mine!

Finally back at it again pretty consistant with the videos again

I have same front stabilizer and 12 side bar,great combo 👌

QAD = allen wrenches and little knives. Not complaining! I went with the 33 at a similar draw length for both the hybrid aspect and because I felt the draw cycle was so smooth. I also need all the stability help I can get.

All I have is a hinge 2 I really been wanting get a button and a slider but man money is tight maybe one day love the videos Chris keep up good content

I hope you guys make a grip that accommodates the shot sense.

It is crazy to see the number of bows he has... And here I am still hunting with my dad's pse bow that's almost 30 years old lol and could not even afford a "budget" bow

i am quite interested to see you do a fully target setup and score

Chris! Love the video - this is a huge help as I’m setting mine up currently. I have another question for you - I’m noticing a little bit of wobble in your arrow flight, I’m new to this so I’m assuming this is normal? Also, Is this all that you do in terms of tuning or do you incorporate any other methods for accuracy and arrow flight characteristics. Big thanks from Alberta!

That thing shoots great

"Always cut towards yourselves, kids" lololololol

Would you ever make a video about an elite ethos

Just got my new Lift 29.5 to replace my Chill Monster R which is now my backup for western hunts.

Do you donate the last year’s model when you get a new one in?

Awesome bow nice!!!

Hey, Chris Bee I shoot in the Young adult category. I shoot the Matthew's phase 4 with a 10-inch bridge lock stabilizer out the front and a spot hog fast eddie 2 pen i have been getting pretty competitive through 3D and indoor target stuff. I was wondering if you had any advice for getting sponsors for equipment and sponsors in general I would love any advice in general on how to get better and place better in competitions. Love you're Videos keep up the great work.

I was thinking about getting and putting the vbar bracket in the front to angle the front bridge lock bar down and left to see how that sits. Wonder if the will off set the need of a back bar? If it works.

My goodness those arrows shoot like laser beams!

You should go bow fishing

Chris tell how you got started and how you became a pro archer please

@Taylor.shay75

Ай бұрын

Listen to working class bowhunter he just did a long podcast and explained it all

@buckfeveredneck

Ай бұрын

​@@Taylor.shay75 What is the title of the podcast?

Chris, which peep do you use on your hunting bows?

I ordered the try before you buy and got the medium it is snug on my bare fingers should I get the larger?

Let's go! 🏹

with all of your skills as a archer what bow do you recomend for someone starting out mathews bows

Thats my dream bow

also on the "permanant" bee real grip... leaving the sticky on is fine if you have man strength. if you have baby hands, yeah take it off.

Nice bow hefty price tag

Him getting a new bow every year while I'm stuck with my 45lb kid bow that shoots 20 yards 😂 I guess I better get my money up

@ChrisBeeReal what kinda nocks do you use?

The RIP XV or 3DHV are the best TAC arrow made and it's not even close.

Hey anything on the score for broke g2? Love the videos

would the bee real grip fit on a hoyt nitrum turbo?

What nocks are those, every nock I try is tight on the lift center serving?

about time you got a new knife, that kershaw is always duller than a butter knife

I will take one of those sliders if you don’t need it Chris

Missed an opportunity to alternate the stabilizer weight between black and gold… like a bee. You should do that

when is UV going to come out with a lefty sight that has the same ergonomics as the right handed sight?

Kind of random but the guy that installed the grip on my 33 didn’t take off the glue and I ended up having to take it off and it took a lot of elbow grease but I got it off without breaking it thankfully

running a vxr, dreaming about a lift.

Wonder why Chris never uses the engage limb legs? 🤔

You’re only getting it now? They’ve been available since November

Think I’m buying this bow I have a Hoyt katera need an upgrade

Nice 👍 👍 👍

Something i do not understand Chris, why do manufacturers not time them when they install the strings?

You should hunt with it

Shouldn't 3rd axis be checked at full draw?

I’m wondering what Sitka pants those are.

What was the poundage on that bow?????????

GO GREEN

If your not going to use that 33 lift I’ll take it off ya lol

so quiet!

3rd

first x'D okay i know it's borring but just fun :p

Second

First

Chris hook me up with a discount code for your mathews grip 2.0

Give the total MSRP of everything on the bow please Hat itself cost $1,000 n the bow is $300. 😅

What if someone walked in the door just while your release An arrow.

I,love your channel…but there are just too many mathews bow build videos…but I understand they are your sponsor.

@Taylor.shay75

Ай бұрын

But not everyone shoots one size. So each bow is therefore different. Hence another video. Do you watch podium archer? He does tons of bow builds you go and bash him?

@TheNewBowunter

Ай бұрын

@@Taylor.shay75 My comment is not meant to be bashing..But thats what I hate about sponsors...we will never see Chris show anything but a Mathews Bow. Now if thats what he perfers..then more power to him. I highly respect Chris..and my comment is not intended to be derogatory in nature.

Hold up ive always been taught to cut away from myself.....i dont think suggesting your audience to cut towards themselves is sound advice in fact I insist this is completely wrong your much more likely to hurt or cut yourself that way in the event of the knife slipping rather than the safer way which is cutting away from yourself honestly think about that for 2 seconds...