as I've said before, it's great watching you grow as an artist

@MiniatureHobbyist

16 күн бұрын

Thank you so much, its all about having fun 😊

I do like the shark under the water it's come out really well. 🙂

The water effect is REALLY good! One trick you can do for estimating resin, is using rice instead of water to pre-measure the quantity. Just ensure there is no find powder in the rice and all should be good!

Fill the mold with dry rice or dry sand. Pour it into a measuring container after. Get a guess at the volume that way. The dry material is way easier to clean out.

I bet the name 10:20 of that dipping ink inspired this build! 😂❤🎉

That sea is absolutely superb!

@MiniatureHobbyist

15 күн бұрын

Thank you so much 🙂

Awesome result that.

I use perl grain rice to work out the volume of resin needed in stead of water.

LOVE the end result! But it was me and i would have put in all that work, I would have gone the extra mile and sand off the resin supports marks. They are really an eyesore.

It would be cool to see a Orc growing underground diorama. With the Orcs mushroom on the surface and the Orc connected to it.

@MiniatureHobbyist

14 күн бұрын

hhmmmm that sounds like a cool idea 😊

That came out great! Very good idea

That´s incredible, I have to try that by my self. Thanks for that, awesome channel !

@MiniatureHobbyist

16 күн бұрын

Thank you so much 😊

Looks great, fella! Awesome techniques all round! Bravo! "get me teeth in!" haha - Bless ya! :D

@Monkeesblood

8 күн бұрын

…to add, even that flashing on the dorsal fin looks great!

I love that you use clear epoxy and paint the top!! Very nice work!!🎉❤

@MiniatureHobbyist

14 күн бұрын

Thank you! 😊

Great content as always.

@MiniatureHobbyist

16 күн бұрын

Cheers😊

Vfar as the wood is concerned you can skim it wit filler or even plaster the just sand it down with a fine grade sandpaper.just make sure it's completely dust free before you cast the mould

Using Melamine faced board will give a smoother surface for the edges of the mould

Looks awesome!

@MiniatureHobbyist

16 күн бұрын

Cheers 😊

Well done on the silicone mold.

@MiniatureHobbyist

15 күн бұрын

Cheers, Im pleased how it came out 🙂

Very nice, it looks great.

@MiniatureHobbyist

16 күн бұрын

Cheers, it was fun 😊

Nice work as always 👍👍

Excellent project 🔥🔥🔥

@MiniatureHobbyist

16 күн бұрын

Cheers bud 😊

Great ideaand well executed. It's only the paint job that's lacking ...in this diorama.

@MiniatureHobbyist

14 күн бұрын

cheers Simon Cowell, oh well youtube algorthym loves you 😊

For the bio-chamber. You should put a Slannesh chaos figure.

Fab looking project !!!

@MiniatureHobbyist

16 күн бұрын

Thank you 😊

Great build! An idea for the cryogenic tank: an ork’s head with wires and cables attached to it. - Rick, USMC

shark in place of the man half of the centaur... fighting a mermaid with lycanthropy

The cryo chambers would be a cool in a Mechanicus or Dark Mechanicus Genator/Magos Biologis laboratory diorama.

@MiniatureHobbyist

14 күн бұрын

so a kinda robot head with wires and a spine coming out of it then 😊

Gloss varnish with brush or airbrush mate and will look clear. Lovely job ❤

@MiniatureHobbyist

16 күн бұрын

Cheers, I will have to try that next time 😊

Sooo epic

@MiniatureHobbyist

14 күн бұрын

thank you so much 😊

yeah

@benjaminhayward5921

9 күн бұрын

😆

Instead of using UV resin to bring back transparency, have you tried varnish? It works for me and it's less expensive than the resin.

@MiniatureHobbyist

14 күн бұрын

ahh cheers I might try that next time 😊

Bro 😮 that looks amazing ❤ so much inspection

@MiniatureHobbyist

16 күн бұрын

Thank you so much buddy 😊

Use rice to measure the amount of resin needed.

@MiniatureHobbyist

16 күн бұрын

Hhmm maybe, its fun eyeballing it lol 😊

Is there any particular reason you didn’t tint the actual resin with alcohol ink? It would probably be easier to colour the ocean that way and you wouldn’t have to worry about paint fading or rubbing off the external painted surface. With the epoxy being tinted you probably could’ve painted the shark in the traditional colours of grey and white. Unless you deliberately want that particular look in a fantasy setting. Just a friendly suggestion. I really enjoyed this build. I’m a big fan of casting myself. Great for making objects and scenery quickly en masse. Great for dungeon floors and walls.

Since Klingons are space Orks, why not a half cloaked bird of prey and the other half sprue goo?

@MiniatureHobbyist

16 күн бұрын

Haha that sounds fun 😊

"So yeah...and yeah...yeah."

@KyleHorseman

10 күн бұрын

Often this speech pattern would be annoying in this sort of video but he kept up a good rhythm of narrative so I found the vocal tic charming

First time watching your channel and I liked the relaxed feel. But please please please stop saying YEAH!! Have a look back and your see how many times you say it.

I honestly thought you were going to cast the shark in the resin upside down with the plasticine and skip the silicone step entirely.

@MiniatureHobbyist

16 күн бұрын

Haha yup that wouldnt have worked too well lol 😊

Looks great!

@MiniatureHobbyist

16 күн бұрын

Thank you 😊