Mastering GFRC Concrete Additives Mixing
Тәжірибелік нұсқаулар және стиль
In this 10 minute video, you will learn how to carry out a basic GFRC mix using separate additives.
You can of course use our all-in-one bag mix which takes this headache away!
CHAPTERS
00:00 introduction
00:09 add sand
00:27 add dye
00:53 add GFRC additives
01:00 add superplasticizer
01:11 mix the dry ingredients
02:05 add part of the water (60%) & turn mixer on
04:00 switch off mixer
04:10 add half of the cement
04:50 switch the mixer back on
06:15 add half remaining water
06:50 switch the mixer off
06:55 add remaining cement
07:10 switch the mixer back on
07:25 add remaining water & mix to a smooth consistency
08:52 switch the mixer off & leave to rest for 10 minutes
09:00 add half of the glass fibres to the rested mix
09:30 add the remaining fibres
09:53 rest for 10 minutes
EQUIPMENT USED
Forced Action Mixer
Gauging Trowel
ESSENTIAL PPE
Gloves
Goggles
Respirator/mask
+++++++++++++++++++++++++++++++++++++++++++++++++++++++
SUBSCRIBE: kzread.info...
OUR WEBSITE: www.concretelab.co.uk
INSTAGRAM: / concretelabuk
FACEBOOK: / concretelabuk
TIKTOK: / concretelabuk
HOW TO CONTACT US:
info@concretelab.co.uk
Пікірлер: 16
very good tip to wet mix the sand first
Hello What is the flowcrete..?
Mua máy trộn ở đâu ah
Please what grade of sand that passes through which sieve are we using? Thank you
@ConcreteLab
2 жыл бұрын
Hi Namso. Please send us an email for more more technical questions.
Whats the difference between flowCrete and superplastisizer. Don’t they do the same thing?
@ConcreteLab
3 жыл бұрын
Hi Mauricio. They are two very different products. The Flowcrete contains various components which add strength, prevent foaming, stop warping and increase the initial cure so that the concrete can be remoulded within 18 hours. The superplasticizer ensures the mix is workable, self-consolidates and reduces the amount of water that is required for a number of reasons.
Để lại cho mình máy trộn
Please let me know the ratio of the material added? Thank you
@ConcreteLab
3 жыл бұрын
If you go to our support website, concretelab.support, the basic GFRC mix recipe is there.
@namsoemmanson8338
2 жыл бұрын
@@ConcreteLab Thank you for your information
What is the size of the fiber?
@ConcreteLab
Жыл бұрын
13mm
@mobihome1599
Жыл бұрын
@@ConcreteLab thanks.
Thank you very mush. I m not good in english if you van traduct un frensh or arabic thank you
@ConcreteLab
3 жыл бұрын
I'm afraid not Fakou.