Wonderful! Thank goodness for you tutorials! More power to your channel!

Thank you very much! I finally managed to clearly understand the basics of controlnet. Everything works perfectly for me. I just avoided downloading the workflow, rebuilding it step by step and following your video! Fantastic!

Excellent tutorial the Aux processor information was very useful.

Nice and simple explanation. Thanks.

So far you are my favourite AI tutorial guy.

Thanks bro for your work. Really concise and great videos

I think that it is important to understand the concept first. And you explain this very well. I use to watch a lot of other video of "how to" on that subject, but it‘s like watching a robot reading a technical paper that only scientists would understand. Anyway nice video 😊

@DreamingAIChannel

9 ай бұрын

Thanks! And yes, i hate that too, i mean if you want to read me some part of the paper that explain to me the concept if fine, but the more technical parts are of absolutely no interest to most people.... it's like I'm supposed to buy a car and the guy at the car dealer starts reading me the engine technical manual 🤣

Great vod mate!

Thanks for the tutorial it came in handy

Great video, concise explanation. Loved it.

For someone who gets an error saids "mat1 and mat2 shapes cannot be multiplied (154x2048 and 768x320)" , that means you're using something for SD 1.5 with XL models(checkpoint). If you look at the checkpoint's name then there should be a word "XL" included. You just have to look for another model on civit AI or somewhere and use it.

@adriands8207

Ай бұрын

I have tried different XL models and all of them gave me the same mat1 and mat2 error, the only one that works for me it is epicrealism_naturalSinRC1VAE. Do you know what I am doing wrong? Thanks

@lyr1c53

Ай бұрын

@@adriands8207 Yeah, you can't use models that includes letter "XL" in the model name.

thanks for tutorial ! useful !

Great job. Do you have any examples of workflow with 2 and or 3 adapters?

I want to use openpose but I notice for all the Control Net models on huggingface there are two of each: .pth and .yaml. What's the difference between them?

Great tutorial, thanks! Also, how did you get the straight lines instead of noodle connections?

@DreamingAIChannel

7 ай бұрын

Hi! Thanks,here i've explained how to put the straight lines: kzread.info/dash/bejne/c56ryNWwqq_TqLg.html

@MichaelDeNicola

6 ай бұрын

@@DreamingAIChannelty for including the timestamp as well 🙏

Hi complete newbie, installed Auto1111 a week and a half ago and then took the leap and installed ComfyUI Thursday. I've watched a few of your videos and I really like the way you break down what look like really complicated workflows when I read up on them and break it down and show what you need and how it all links up, thank you :) I was wondering if this could be used for img2img? Got it to make character pics for D&D and would be cool if I could use this to change poses but retain the character and style.

@DreamingAIChannel

6 ай бұрын

Absolutely! The most simple way to do img2img is use Load image -> Vae Encode -> Ksampler reducing the denoise to like 0.2 or so (you should test with low cfg too) -> Vae Decode -> Save Image... but what you asking is a bit more complex since you need to use controlnet to inject the pose keeping the character and style maybe with some lora. I could try to do it and maybe make a video about it!

@runebinder

6 ай бұрын

@@DreamingAIChannel thanks :) I'll give that a try and let you know how I get on.

Does it matter whether you put the apply Controlnet before or after the prompt? Model-> ControlNet->Prompt or Model->Prompt->ControlNet?

encountered this issue when trying to load test preprocessors "When loading the graph, the following node types were not found: PiDiNetPreprocessor ColorPreprocessor CannyEdgePreprocessor SAMPreprocessor DWPreprocessor BinaryPreprocessor.... Nodes that have failed to load will show as red on the graph." how do i fix this?

why no openpose editor in comfy? not great for image to image for example when it fails to find the pose.

how to install COntrolnet in comfyUi?

hey, i just added the .yaml and .pth files of open pose but when im on comfyUI and im loading the controlnet the .safetensors doesnt appear instead it appears the .pth file but it gives an error when i try using it

@DreamingAIChannel

3 ай бұрын

uhm, maybe you put the safetensor in the wrong folder

Unfortunately I wasn't successful following this tutorial, somewhere I must have made a mistake. After building the workflow and getting my pose base image I hit Queue Prompt. Once the workflow reaches the KSampler I get an error message Error occurred when executing KSampler: mat1 and mat2 shapes cannot be multiplied (154x2048 and 768x320) File "Z:\AI Images\ComfyUI_windows_portable_nvidia_cu121_or_cpu\ComfyUI_windows_portable\ComfyUI\execution.py", line 153, in recursive_execute and the many more errors after that which mean nothing to me. If you have any ideas what might fix this please let me know.

@DreamingAIChannel

7 ай бұрын

well, is possible that the width and the height of the image in the load image and the width and height of the empty latent are different? It should be the same for what i know

@thecolonelpridereview

7 ай бұрын

Thanks for your response. I loaded up a 512x512 image and set the latent to the same size, which did indeed remove the first line of the error message but not all the subsequent lines. I guess I'll have to keep searching for a solution but if you think of anything let me know. Cheers.@@DreamingAIChannel

@sebastianvalenzuela1652

6 ай бұрын

I had the same error. Not all checkpoints work with open pose. I was using Juggernaut and I got a error at kSampler. I changed the checkpoint to some anime one and it worked.

@thecolonelpridereview

6 ай бұрын

Thanks for that! Would you mind telling us which anime checkpoint you used exactly? I'll download it and give it a try.@@sebastianvalenzuela1652

Error occurred when executing ControlNetLoader: Error while deserializing header: MetadataIncompleteBuffer File "C:\Users\(USER)\OneDrive\Desktop\SDXL\ComfyUI_windows_portable\ComfyUI\execution.py", line 151, in recursive_execute output_data, output_ui = get_output_data(obj, input_data_all) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\Users\(USER)\OneDrive\Desktop\SDXL\ComfyUI_windows_portable\ComfyUI\execution.py", line 81, in get_output_data return_values = map_node_over_list(obj, input_data_all, obj.FUNCTION, allow_interrupt=True) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\Users\(USER)\OneDrive\Desktop\SDXL\ComfyUI_windows_portable\ComfyUI\execution.py", line 74, in map_node_over_list results.append(getattr(obj, func)(**slice_dict(input_data_all, i))) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\Users\(USER)\OneDrive\Desktop\SDXL\ComfyUI_windows_portable\ComfyUI odes.py", line 705, in load_controlnet controlnet = comfy.controlnet.load_controlnet(controlnet_path) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\Users\(USER)\OneDrive\Desktop\SDXL\ComfyUI_windows_portable\ComfyUI\comfy\controlnet.py", line 326, in load_controlnet controlnet_data = comfy.utils.load_torch_file(ckpt_path, safe_load=True) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\Users\(USER)\OneDrive\Desktop\SDXL\ComfyUI_windows_portable\ComfyUI\comfy\utils.py", line 14, in load_torch_file sd = safetensors.torch.load_file(ckpt, device=device.type) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\Users\(USER)\OneDrive\Desktop\SDXL\ComfyUI_windows_portable\python_embeded\Lib\site-packages\safetensors\torch.py", line 311, in load_file with safe_open(filename, framework="pt", device=device) as f: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 🤷‍♂

how do you get the wires to be at sharp 90's?

@DreamingAIChannel

4 ай бұрын

Hi! here i've explained how to put the straight lines: kzread.info/dash/bejne/c56ryNWwqq_TqLg.html

How do I change the pose of an existing image instead of creating a new image, pls help

@DreamingAIChannel

4 ай бұрын

I know this is possible in A1111 with a reference image, I don't know if it is possible with controlnet in comfyui, I would have to try!

would be cool if you add the template

I'm confused between automatic 1111 and comfy ui

@Make_a_Splash

9 ай бұрын

Stick to comfy UI is hard and confusing initially, but you have always control . Aut1111 is way behind Comfy UI. Save this workflow as group so you can always recall them when you need it. Make another one for Inpainting, Image 2 Image and Upscaling.

@keepitshort4208

6 ай бұрын

​@@Make_a_Splash true confusing, but fun when it works, but sadly for me using 1660ti my python crashed 😅

Prompt outputs failed validation ControlNetLoader: - Required input is missing: control_net_name what did i do wrong...?!

@DreamingAIChannel

5 ай бұрын

uhm maybe you didn't connect some input, it's a pretty generic error... dont you have some red/pink node enlightened?

How are those wires straight? Mine is like spaghetti tangled

@DreamingAIChannel

5 ай бұрын

xD ,here i've explained how to put the straight lines: kzread.info/dash/bejne/c56ryNWwqq_TqLg.html

keep dreaming.?... thats what she said :(

@DreamingAIChannel

3 ай бұрын

🤣