I am so loving this range of videos. Casual HA user for five odd years. Have heaps of products & ideas though still stumble my way through many Automations 😅😂

I noticed there is a link to a video in the home assistant documentation, but honestly, this video is (in my humble opinion) better for more people. You should add links to specific sections of the video to the corresponding section of the documentation.

Excellent. It’s about time someone does it good and clear. Great work Jeff!

Great job! Thank you for sharing your knowledge!

Amazing! Best video about templating. Thank you very much !

Very nice explaination of all the template sensor uses. I was getting myself into this more and more but now I have many usecases to improve my smarthome. Thanks!

Great video. As a beginner the new and legacy yaml format is confusing. Your video is a great help. Would like more explanation on state classes, domains, etc. with reference to official ha documentation

Great!!

@SlackerLabs

10 ай бұрын

Thank you!

I have been trying to get my Apple TV to show what is being watched and I found you while on my quest for a solution.

This in great. Love the deep dive. I recently created my own template filter to handle a complicated calculation. I wonder if you could to that to make a date math function

Tack!

@SlackerLabs

10 ай бұрын

Thanks!

Can you update your templating playlist? You probably have the best templating instructions on KZread. A lot of information is covered and the playlist helps in finding the specific thing I'm looking for.

@SlackerLabs

6 ай бұрын

Done. I need to get the next one done. But I have some other videos I will probably get out before that one.

Hello, many thx for your youtube video. May I have some help ? I don't know how to establish a calculation made from 2 entities ie: entitie apparent power that divides entitie inverter voltage so as to know the current and declare it as a new entitie. Do you have a simple example? Sincerely

Hi! Nice content, thx! I'm struggling to find content about tasmota mqtt entitys without standard device class on HA (like MPU 6886 accelerometers/Gyros) and so, those entitys cant be shown on statistics with graphics. Could you give me some hint about how to solve it?

i think i love your videos more that you're explaining random (not random per the video) data for jinja... i searched forums forever trying to find 'next day' or even more for quite some time.. and the best i could come up with was essentially adding 86400 times the number of days to find that and in this video.... a string much shorter finds the same value.... do you have a discord? cuz i'm sure much of what i need could be solved with simply asking you and you'd know it. lol

Where do templates save if you don't create a manual entry in Config.YAML?

Thanks a lot for your template videos!!! Question: Which mmWave sensors are you using? Do you like them or, in other words, would you buy the same sensors again? Best regards!

@SlackerLabs

10 ай бұрын

Right now I have a mix. I'm using the everything presence sensors ( I have 3 now), the FP2 and the Roomsense IQ. I would buy the EP1 or the roomsense iq. Not sure I would buy the FP2. I like mmWave. All three have been reliable presence sensors. But the FP2 doesn't is lacking in the HA integration side.

New subscriber (and new HA user) here. Thanks to your template series, I’m steadily progressing in my template creation (and lots of re-writing). I’m wondering if you’ve installed any jinja extensions into vscode to make writing your templates easier/faster. If so, do you then just paste the code into the Template tab in the Developer tools? Or are there better ways to integrate jinja development via vscode? Thanks for all the great tips!

@SlackerLabs

Ай бұрын

I only use the HA extension in VS Code which just helps with syntax or auto complete. I'm actually not sure there are any good extensions. I should check. HA is getting some more template tools so that will make it easier to do these from the UI. And I totally need to get that vidoe on trigger based templates done.

I have an unrelated, related question. When you said you have sensors in your freezers to notify you. What sensors are you using? How are they connecting (wifi, BT, Zigbee, zwave, etc). I would like to monitor my own freezers this way. Joe

@SlackerLabs

8 ай бұрын

Mine are Rf. Using 433mhz based sensors. I have a little sdr usb stick and talks to an HA addon to bring that data in. I have not tested if a zigbee sensor would work. I suspect the lining in the freezer might cause some Interference with some of the frequencies out there

@MyHeap

8 ай бұрын

@@SlackerLabs thank you for the information. I appreciate it. For giggles I put an aqara temp sensor in my refrigerator to see if it would work. The short answer is no, it drops off the zigbee network. I suppose the radio is interfered with by the metal housing of the refrigerator. I am guessing it is likely shunting the signal to ground perhaps since the chasis and skin of the refrigerator is tied to ground. Thank you again. I am still kinda new with HA and you videos help. Joe

Do you have a good video or spot in a video where you show how to automate light scenes? You talked about having lights turn on a certain way and then making 50 scenes then replacing those with a template. I have over 100 smart lights in every room of my house, and the way I've done it is to set a scene for the light color and brightness (normal, bright, late night). I'd like to automate the creation of those scenes. I thought I could setup a Number based on the weather (good for 3500K vs 5000K) and when turning on lights in a room, it references that number and sets brightness to 100%. Then for Late Night, I need to rethink it because it's custom per room with only some lights turned on and different colors. It's not for when I'm in the room either, just for when I need light but don't wanna wake myself up. Does that sound like the right way of going about it?

Great video walkthrough and explanations, but could you not write a script that changes the area of all the battery entities with a numeric value to "Critical Battery". I have 200 battery entities 😂

@SlackerLabs

10 ай бұрын

Actually I bet we could. That's probably not a bad idea. I was just thinking it would easy to set the area when a new device was added. But now you got me thinking that's totally boring. We need to automate that!

The button monitor entity lacks a 'platform' statement. Or do i miss something?

Thanks for the video. Question. you have two call service to scripts; "script.cleanup_text" and "script.text_notify" in your example file scripts.yaml. But how does those script look like (or did I miss something)?

@SlackerLabs

10 ай бұрын

The clean up one I talked about in the recent response variable video. The text notify one was talked about much longer ago than that. I need to do a better job of documenting my config.

Nice! I found the examples of counting down the number of days until a specific date to be useful. How would you apply this to something where the date varies from year to year? Like Thanksgiving (the last Thursday in November), General election day (1st Tuesday after the 1st Monday in November) or Easter (I'm not even sure what kind of rule THAT would follow).

@traskth

5 ай бұрын

Easter is the first sunday following the first full moon after the spring equinox

@donireland6218

5 ай бұрын

@@traskth that knowledge doesn't help with the question asked -- unless you have a way to figure out when the first full moon is.

@traskth

5 ай бұрын

@@donireland6218 it was asked what the rule was for easter, i was just stating what the rule was. I dont know how to apply countdown to a moving holiday, but im not great when it comes to jinja or HA templating

@donireland6218

5 ай бұрын

@@traskth I was asking about the moving holiday. I only offered Easter as an example.

1:40 OMG! My confusion has a reason!?! [Shakes fist at the incomplete HA documentation]

Thought I was following. I have this in template.yaml and what else do I need to do to create the binary sensor 'hose_on'? - binary_sensor: - name: hose_on delay_off: minutes: 20 state: > {{is_state('sensor.orbit_b_hyve_state','manual')}}

@SlackerLabs

10 ай бұрын

That's looks right to me. Just make sure your indention is all lined up. And that you have three template: line in the configuration.yaml and your restarted HA after adding that configuration.yaml part

@chrise666

10 ай бұрын

Thanks @@SlackerLabs I just have this in configuration.yaml -> template: !include template.yaml

The real question I have for you Jeff is why did you not make a days until Rex Manning day?

@SlackerLabs

10 ай бұрын

And that is a really good question. To which I will now go question all my life’s choices up until now. And make that sensor

@rasbe6863

10 ай бұрын

@@SlackerLabs see only someone who has been following you and watching you for many years can understand the importance of Rex Manning day

In my opinion the term template is quite misleading. A better term would have been dynamic processing.