Buddy you are my new favorite reviewer. Putting out the content I've been dying to see. Patiently waiting on that battery pack review and more mast flip info I just ordered both 2 batteries. Will be trying them with the packer wand and xion

@Tanstattoo

2 жыл бұрын

Thank you for stopping by 🙏, that's a dope set you have in your arsenal.

Your review got me to order this flip thanks brother 🤙🏽💯 I’ve been tattooing for a few months now and I can’t wait to use this when it arrives….

This machine I’ve been using for a few months now and it is the best bang for your buck and can do anything you just gotta play with it a bit and once you tune into what you like and what strokes and voltages work man let me say it’s all worth it to pick up an extra one

@Tanstattoo

2 жыл бұрын

Thank you for stopping by 🙏. Yes I really do like this machine, sometimes I hold it and think to myself this machine should be in every tattoo set up out there.

@theshoptattoos

2 жыл бұрын

@@Tanstattoo exactly!!

this is so helpful, thank you! i wish i found this earlier. i saw you write that the flip is great for everything except linework, where you recommend mast tour pro. i want to get into fine linework specifically. what do you recommend for that? thx!

I just ordered this to learn as a hobbyist. I am sooo excited. It seems like a beginner friendly pen. Now to see if i can learn.. lol

you won a new sub. I just ordered a Mast Flip and you had a lot to do with it. I normally use a thunder from cheyenne but I need a more versatile machine, specially for smooth shading. Thanks bro

@Tanstattoo

2 жыл бұрын

Thanks for the sub!

Subbed...because of the zero bullshit and honest responses to questions in the comments.

@Tanstattoo

2 жыл бұрын

Thank you for stopping by 🙏 hope the videos help.

Hey I just got a ambition storm wand thinking it was the soldier, is there much difference between them?

thanks for this video !!!! and if I wanted to activate the wireless ... What battery do you recommend?

@Tanstattoo

2 жыл бұрын

Mast t1 is the battery pack I have, but any RCA battery pack should work with it.

Are the needle protrusion adjustable too?

hey there, im just an apprentice so far. Can you please tell me what a direct drive means? Im currently looking into the FLIP and Mast Tour Pro. Tough choice atm. Also is there a video to better understand the strokes? thanks man. Great video!

@Tanstattoo

2 жыл бұрын

Thank you for stopping by. What is your social media because I can send you a quick video on there explaining the difference between the both. Direct drive is usually a faster machine. Example, an eccentric wheel machine will spin at 9000rpm at 10-11voltz typically. While a direct drive machine will spin at 10,000rom at 8-9voltz. So with a direct drive you don't have to work slow, large tattoos don't seem so long and pulling lines is a walk in the park, also they don't vibrate as much. The downside is you can easily chew up skin because it is a much harder hitting system. Eccentric wheel is arguably a softer hitting machine and it's the type of machine that if you want to pack color then you better know what you're doing or you will find patches in your tattoo. Now you said the flip or the Tour pro? I would grab the flip. You get a far more superior machine with it's adjustable stroke. The flip out performs the tour pro in every aspect except one, linework I would pick the tour pro with the 3.6 or 4.0 cam if available for linework. The flip can pull bold crispy lines, but the mast tour pro can pull bold crispy lines like a hot knife through butter.

@craigmolyneux4341

2 жыл бұрын

@@Tanstattoo do you know where I can get a 4.0 mm cam for the mast tour Pro?

just got mine today😊 the "lava" color is rad...will try it out this wkend!

@Tanstattoo

2 жыл бұрын

Hope you like it!

been very interested in this machine since it first dropped. but did not know it was not a direct drive machine. huge thanks for that incredibly important fact on this!

@edwincruz5298

2 жыл бұрын

I don't understand about the direct drive thing what it has to do? I hope you can tell me about it thank you

@ryansoutherland4265

2 жыл бұрын

@@edwincruz5298 It is just the way the machine pushes the cartridge's plunger. Direct drive machines have a small "piston" that push the needles. Vs. a sort of fan-like wheel that rotates over top of the cartridges plunger to push the needles. Hope I explained that well enough. However, using either is more a matter of preference than one being better than the other. Different machines work slightly differently so, it's more of finding what works for you and your style.

Acabo de ver el video porque estoy muy interesado en esta maquina, y me gustó mucho tu contenido, saludos desde Colombia 🔥

@Tanstattoo

2 жыл бұрын

estoy poniendo videos en espanol en otro canal. El Wawa es el nombre de el canal.

hey thanks for ur video! I’m new to tattooing, I’m looking for my first machine. Im thinking between the Mast Archer / Mast Flip / Mast Flip pro? I’m gon be working a lot with realism! thanks !

Hey homie, thanks for the reviews. Question tho...does the flip line well? I'm trying to get away from coils, been getting tattooed and have been interested in tattoos since a kid, been toying with it here and there but I'm going full force now, trying to make it a career. Lol, anyway, trying to find 1 pen for all, mostly due to budget so will this flip push a 9 rl? If yes and in your experience will it even push a bigger rl or rs? Thanks in advance, I'm subbed! Are you going to do any tutorials? Thanks for the content. Stay dangerous

@Tanstattoo

2 жыл бұрын

Thank you for stopping by 🙏. You mentioned you're a coil guy, short answer yes it can run a 9rl but the problem is that it is eccentric wheel rather than direct drive. I would definitely pick up a direct drive machine. Do you have what's app?

@Tanstattoo

2 жыл бұрын

Yes I'm going to be doing reviews on needles, and how to tattoo vids are coming up soon. Thank you for the sub. Back to the subject, the flip is more about flexibility rather than performance. If you're trying to pull larger thick lines then a direct drive is your best bet. The thing about eccentric wheel is that the motor spins a wheel and that wheel hits a spring loaded rod, that rod pushes the cartridge. So a ton of power is already lost, so rather than pulling single pass lines, you now have to build up the lines if that makes any sense. The largest I would throw at this machine is a 9RL and maybe a 15mag. You don't have to spend Flip money to get flip performance check out my video on the ambition ninja and ambition soldier. Both come with an extra cam so you can ask for a 3.5 (smooth black and gray realism) or 4.0 (color or heavy linework. Hope this helps and if you have more questions let me know.

@OUTLAW_THA_KID

2 жыл бұрын

@@Tanstattoo Thanks bro, sounds like the ambition is where it's at. Thanks for the advice.

@OUTLAW_THA_KID

2 жыл бұрын

@@Tanstattoo I dont have whats app, I'll download it tho

@Tanstattoo

2 жыл бұрын

@@OUTLAW_THA_KID let me know when you do

do u use dragon hawk needle? can you recommend any other company just to buy the needles?

What speed would u run it for shading and lining?

Hello what advice to draw nice lines like 7,9,11 RL .. Mast lancer or xnet Titan? I would like to understand which one is more convenient, because I would like to buy one of the two .. I love the mast lancer because you can change the battery, but I am afraid that it does not push well in the lines, I work on lines 7 9 and 11 and I blend with the 3RL technique. ..I had also thought about a MAST flip but I am not convinced by the eccentric motor .. What do you recommend between MAST lancer and xnet titan

@Tanstattoo

2 жыл бұрын

For strictly linework I would go with the Titan

Bro is you have to choose in between this machine and the soldier what machine you will choose ? Btw I love your videos full support for germany

@Tanstattoo

2 жыл бұрын

I would pick the SOLDIER with the GERMAN motor. thank you for the support.

Hi, thanks for your videos! What is your favorite machine? Ambition soldier or mast flip? For linner, What is the Best machine? Thanks!!!

@Tanstattoo

2 жыл бұрын

Thank you for stopping by 🙏, lol my favorite machine as of today is the mast flip, second is the Ambition ninja and third is the ambition Soldier. Now for your question, direct drive is definitely a better option for lines. That is what works best for me.

Hi Wawa, I really appreciate your videos, they are soo helpful. I'm a beginner and I want to buy my first machine, would you suggest me the mast tour pro or the mast flip? Thank you

@Tanstattoo

2 жыл бұрын

The flip, it has extreme versatility and it really is suitable for any style of tattoos.

@davidelupini6726

2 жыл бұрын

Thank you very much, my only concern is about lining. Do you think it packs enough punch?

@Tanstattoo

2 жыл бұрын

@@davidelupini6726 if can pull lines but you really have to sacrifice speed for that.

@davidelupini6726

2 жыл бұрын

Alright, thank you very much.

I will probably get that next. I was going to get it but got titan instead. (Which I like very much. )

@Tanstattoo

2 жыл бұрын

Thank you for stopping by. Titan is a great machine. It's a bit too heavy for my old hands, but a great machine all around.

You should get ahold of a Hyperion zabre v2 it's prob like a step above vnc n dragonhawk below the big boys it's a wireless pen I like around 300 maybe

@Tanstattoo

2 жыл бұрын

Bro I've been trying to get my hands on that machine for about 3 weeks now, and they haven't put it back in stock

@Tanstattoo

2 жыл бұрын

Yeah bro I love Mabuchi motors I have an old rotary with a Mabuchi in it an it still runs like the day I got it.

@musahawkins8765

2 жыл бұрын

@@Tanstattoo I know I've checked pretty much everywhere it's out of stock everywhere rn but yeah mabuchis are actually real decent

@musahawkins8765

2 жыл бұрын

@@Tanstattoo kwadron equalizer also making a battery pen there known for cheaper machines in the name brands but they still want 500 plus I think I'm pretty sure it has mabuchi as well or another name brand equivelant I feel sometimes your paying for the name and the customer service but I had a cnc Q2 amazing pen for under 200

Great review.. new sub here! I have an ambition soldier in 3.5mm & it does good all around. But it's not absolutely stunning in aspects of smooth gradation shading in light greywash.. my guess would be the intervals of 0.5V on the battery. I'll be testing this theory soon on a power supply.

@Tanstattoo

2 жыл бұрын

Let me know, I'd love to hear your findings.

@anthonydeluca9154

Жыл бұрын

También tengo una Pen Ambition soldier, pasa que es una direct drive y es muy muy seca, golpea muy duro.. lástima mucho la piel, estas máquinas Mast poseen un sistema diferente por eso el golpeo es más suave...

@jayy81894

Жыл бұрын

How did you get a ambition soldier in a 3.5mm?

@justinshields4216

Жыл бұрын

@josesaucedo7482 it was just in the options in the ad. I had a choice for 3.5mm. 3.8mm & 4.0mm with an additional cam of 4.2mm.

me convenciste la voy a comprar eres un buen youtuber desde hoy te sigo desde guatemala

@Tanstattoo

2 жыл бұрын

Gracias amigo, saludos. Mi Instagram es @Tanaostattoo si tienes preguntas.

Got mine 1 month ago and love it so far

@Tanstattoo

2 жыл бұрын

Thank you for stopping by 🙏, have you seen the gradient color?

@tahitineedlestattoo8243

2 жыл бұрын

you'll love it for years

How long have you been using this machine? Is it still working fine? Some people say that it easily breaks or makes weird noises

@Tanstattoo

2 жыл бұрын

I'm still using it, today. No issues here bro.

Hey man! Please answer me.. mast flip or ambition soldier or dklab dkw1? I’m a beginner and I’ll do a few of everything but I’ll try to focus I’m realism.. really appreciate

@Tanstattoo

2 жыл бұрын

Avoid the DkLab Dkw1 that machine stopped working while I was tattooing with it, only lasted a total of 26 hours. I would say get Mast FLIP. It has a adjust stroke so it can do any style of tattoo that you throw at it.

@luccaabreu6943

2 жыл бұрын

@@Tanstattoo thank you man!

Just ordered one, how did the motor hold up

Have you tried the Dragonhawk WJX Maxon Adjustable machine?

@Tanstattoo

2 жыл бұрын

Dragonhawk never shipped it. They asked me if I wanted the new version with the non Maxon motor and I said no.

@richardsalazar9738

2 жыл бұрын

@@Tanstattoo tbh it kinda feels off to me. It has that fluctuation in sound like a couple of my dragonhawk cheapies do. Kinda makes me wonder about it. That Maxon motor should be humming perfectly. I also own the gold and black one. That one hits hard af and lines great, but that little wonky dial is wack af. There is no set setting, and if it isn't sitting right it buzzes loud af like something is out of wack.

hi, I have a plan to buy a tattoo machine can you help me to choose. mast flip or mast fold? I hope you can help me. thank you

Dope review😎👍

How do you compare to mast tour pro

Hello I mostly Work with thin lines and I don’t know if I should buy the Mast fliP or the Mast tour Max…

@Tanchostattoo

2 жыл бұрын

Honestly the max might do a better job for lines, typically you want a 4.0 4.2 stroke for lines on a rotary, ok n which the flip has a 4.0, but the Max is direct drive, and direct drive is a harder hitting system most of the time. but for thin lines that 3.6 should be okay on the Max.

i got fk flux max clone 4 mm stroke and this mast flip, is it good sir?

What brand cartridges are you using with this one? You using Mast Carts too?

@Tanstattoo

2 жыл бұрын

Thank you for stopping by 🙏, the carts I use Are Quelle by CNC and Vselect by EZtattoo

Battery Called T1 is now available are are fit for Mast Flip, Mast Tour Pro, very beautiful on FLIP

@Tanstattoo

2 жыл бұрын

Thank you for stopping by 🙏 yes I received mine not too long ago it's an interesting battery. I like it, I'm making a video on it soon.

@Tanstattoo

2 жыл бұрын

Have you tried the T1?

@tahitineedlestattoo8243

2 жыл бұрын

@@Tanstattoo Yes they are much more better than U1, digital screen with 0.1 voltage + or -

Tattoo beginner here 🙋🏻‍♀️ is this machine good for lining ? Really want to get a reliable machine that does the job for lining without going over a line multiple times

@Tanstattoo

2 жыл бұрын

Thank you for stopping by 🙏, yes this machine is good for linework. All machines are good for linework, there are better machines for linework, check out my Ambition Ninja Video or my Xnet Flux or even my Mast tour Pro Video.

@Tanstattoo

2 жыл бұрын

What is your social media?

@Tanstattoo

2 жыл бұрын

I think this question deserves some private one on one time.

Just ordered mine😎

Could you do blackout Tattoos with this machine?

@Tanstattoo

2 жыл бұрын

Absolutely

Is that direct drivey

Can you demonstrate how to sterilize the machine please I want to know how to do so properly

Thanks for the video

@Tanstattoo

2 жыл бұрын

No problem!

Is this one better than the mast tour pro ? Or the mast archer ?

@Tanstattoo

2 жыл бұрын

I would say it has its moments to shine, but that archer is a really hard to beat machine.

Ordered it directly from dragonhawk tattoo supply, was not impressed, only use it for shading. Even at 4.0 stroke not a very solid lining machine.

@Tanstattoo

2 жыл бұрын

Is it because it's eccentric wheel?

@michaelgrijalva8479

Жыл бұрын

@@Tanstattoo yeah, direct drive hit better

Pls which will you recommend for me ,mast flip and mast acher

@Tanstattoo

2 жыл бұрын

What style do you plan on tattooing?

@Tanstattoo

2 жыл бұрын

go with the Mast Flip. It can do anything.

It’s a copy of the Axys Valhalla. We’ll probably see a Wireless version next year. But the Valhalla is one of the few compatible machines compatible with the Thunderbolt by FK, that setup will cost you $850-$1000 usd 🤣

@Tanstattoo

2 жыл бұрын

Thank you for stopping by. I will say this copy is a solid clone.

@theshoptattoos

2 жыл бұрын

Copy or not this machine does whatever you need it to do really well for the price

@tahitineedlestattoo8243

2 жыл бұрын

I don't see the copy .... but your Valhalla looks really ugly.... so where's the copy ? Lol

Greate content

I just ordered the green one, this morning

@Tanstattoo

2 жыл бұрын

Thank you for stopping by 🙏 this machine is truly something great, you have to find what voltage works, with what stroke, for what style for you. As soon as you figure that out, it's a walk in the park.

I'm trying to get a new liner and shader. But the ones I want are like 700 a piece. What woukd u recommend? Doesn't have to be 200.

@Tanstattoo

2 жыл бұрын

What's your budget for each machine?

@blackedouthonda2263

2 жыл бұрын

@@Tanstattoo hey I bought the mast flip, what is a good speed for lining and shading?

@Tanstattoo

2 жыл бұрын

@@blackedouthonda2263 That depends on the type of skin and needle size, my best advice is pick one size of needles and learn how that needle works, then graduate to a bigger/smaller size. Check out my tattoo videos, because I put lines in at various speeds and voltages. shading is probably 5-6 volts with a moderate hand speed.

@blackedouthonda2263

2 жыл бұрын

@@Tanstattoo I use like 14 rl and 9 rl. And sometime 14 rs to bold. What would u use for shading? Faster or slower? I use all round mags.

@Tanstattoo

2 жыл бұрын

@@blackedouthonda2263 message me on IG Tanaostattoo or Facebook Tattsby Tanao

Mast flip? Or Mas lancer? Which do you preffer sir thanksss

@Tanstattoo

2 жыл бұрын

Thank you for stopping by, the flip is a very versatile machine, but it slows you down. The machine hits way too soft. As I use it more and more I have noticed more things I dislike about the flip. I honestly believe it does not have a 4.0 stroke. That said, I would take the lancer over the flip. I'm going to release a video today that I think will interest you.

Is it direct drive?

They got a wjx version with a maxon In it now

@Tanstattoo

2 жыл бұрын

Yes yes, I'm excited to try it out

@jahidodds171

2 жыл бұрын

@@Tanstattoo mine came a few days ago, pretty smooth I don’t have the flip but I have the Valhalla. More play in the stroke adjustment. But I feel like it hits just as hard even without that extra .2 and it feels crispier on the lower strokes. And it’s weighted a lil better imo. Good buy.

Got my sub

Love the ninja.

@Tanstattoo

2 жыл бұрын

It's my favorite

Can you make review for mast lancer as well thanks bro🤜🏼🤛🏼

@Tanstattoo

2 жыл бұрын

Thank you for stopping by 🙏, yes bro it's coming for sure

@jaynacole6

2 жыл бұрын

@@Tanstattoo thanks bro i'll wait🤜🏼🤛🏼

Hmmm this machine i think the best. It has adjustable stroke 3 to 4.

@Tanstattoo

2 жыл бұрын

This machine is amazing

Can u do a review on the cnc p6

@Tanstattoo

2 жыл бұрын

I will look into that machine my guy.

@davidnegrete3091

2 жыл бұрын

@@Tanstattoo thank u bro

This one or the Mast Tour Pro?

@Tanstattoo

2 жыл бұрын

Thank you for stopping by 🙏 Honestly I would pick the mast flip, but you can pick up the mast tour pro for like 130 right now.

@ingevansand9180

2 жыл бұрын

@@Tanstattoo thank you for responding! In Belgium the Mast Flip is for sale for 199€ and the Mast Tour Pro about 140€ so not a big difference. If the Flip is better than it will be worth it! Is it more versitile or what makes it better please?

@Tanstattoo

2 жыл бұрын

@@ingevansand9180 sorry for the late response, the simple fact that you can adjust the stroke on the fly makes the flip a superior machine. It doesn't put lines in as fast as the tour pro but it pretty much out shines it in every other department. The build quality is better, you no longer have to set up 2 tattoo machines because I'm most cases this will do everything.

How to service it?

@Tanstattoo

2 жыл бұрын

The same way you would service any other rotary machine.

I had seen,its not a direct Drive its a swash wheel.

@Tanstattoo

2 жыл бұрын

Thank you for stopping by, yes it does but I will say that this machine is probably the softest hitting machine I have ever used. Way too soft for my taste.

Lmaoo that first sentence tho

@Tanstattoo

2 жыл бұрын

You caught the typo?

Cnc*

If that thing was waterproof it would have been better

@Tanstattoo

2 жыл бұрын

I have stopped using the flip because it's too tedious to wrap and even more tedious to clean.

Hii!! Bro can I get your fb or IG ??🖤🖤

@Tanstattoo

2 жыл бұрын

Thank you for stopping by how's it going, I'm actually working on my Instagram for this channel. I don't really go on social media and when I do I just say hello to family and friends. As soon as I finish it I will link it in my videos.

Just got mine, nice machine for the price. Havent used it yet just powered it up but it seem like it will be nice to use! Its like the size of my weiner only way bigger lol

What up dude i bought the mast tour pro 7 months ago used it a couple of times on fake skin the stoped working, the part where you plug the battery came loose, then no customer service help at dragonhawk Yeah the mast flip might be good for a couple of hours but then mast machines start coming apart, your videos are fake because you get paid by dragonhawk

@Tanstattoo

2 жыл бұрын

I wish I got paid by dragon hawk. Anyway, my mast tour pro is still running strong, check out my video on that machine. Heck I still have the very first mast tattoo pen ever made and I did more than a couple of fake skins with it and it's still running and that is a really poor quality machine. If I tell you to tattoo with dynamic ink and the tattoo gets infected are you going to blame the ink and accuse me of being sponsored by dynamic? I don't have brand loyalty that's a childish mentality. Did you not see the video where I say " The Ambition Ninja is still my favorite tattoo pen" Educate yourself before you make statements my guy. Thank you for stopping by.

@OUTLAW_THA_KID

2 жыл бұрын

He was prolly Jack hammering practice skin🤣 He shoulda got his shit from Amazon, they woulda took it back. The homie ain't customer service, who you really mad at?

@magibomagibo4451

2 жыл бұрын

Ya don't need to run above 8 volt

@vapestar3705

2 жыл бұрын

@@Tanstattoo he's a douchebag.....supports "solong" oh wait I forgot "CNC" now lmmfao had to rebrand due to how bad there ink and machines were!im not a mast/dragonhawk fan but I will say this I will use mast/dragonhawk any day over CNC/solong!and accusing you?!?!?!?!wtf!your the most honest person I've talk to on yt in all honesty!I've asked questions you've always answered,I've bought machines due to your reviews and have yet to have anything what so ever bad to say about u.your a solid af dude and keep it up man.this dude is just obviously a hater for sure 😃