0:27 what the heck? Your probe works wierd looks like you programed the movement by hand and didnt even use the probe because sometimes it triggers without having contact and sometimes when almost overtraveling the probe
@testyourdesign2335 жыл бұрын
Oh boy .. its here. Nice work
@kiwidude8931
5 жыл бұрын
Test Your Design neat stuff !!! We are now starting to see this product grow into something awesome
@mitchtaylor7725
5 жыл бұрын
@@kiwidude8931 Hopefully we get a few new tricks in the firmware!... Looking forward to it actully coming out!
@jerickesguerra015 жыл бұрын
Nice! Waiting....
@EVOCNC4 жыл бұрын
Any plans to have profile digitizing, external contours and the like ?
@ScottTurnerformeindustrious5 жыл бұрын
Interesting!
@Z-add4 жыл бұрын
How can you use popup locating pins? They are used on cnc routers for cabinet making.
@saintb69695 жыл бұрын
Nice! Finally when do we get it?
@kevinwhitcomb4495 Жыл бұрын
The X and Y probing routines run backwards for me, Z runs fine. Any ideas what I've done wrong?
@Z-add4 жыл бұрын
So i don't need to buy the haimer digital probes?
@radikult-custom5 жыл бұрын
Nice. Will there ever be a surface probing cycle. Like to be able to engrave or cut on not so flat surfaces. Something like G-code ripper
@MassoCNCAustralia
5 жыл бұрын
yes, there will be, we have been making some plans for that mainly to mill circuit boards but can be used on any surface.
@radikult-custom
5 жыл бұрын
Masso CNC Controllers that would be awesome, once available I would switch my 2 cnc’s to Masso controllers. I cut O-ring grooves on acrylic and sometimes acrylic ain’t “flat” and I can not surface the face because I need the factory finish. Once “surface probing” is available I can switch from Mach3
@mr_mohrk5 ай бұрын
But how do you probe an boss ?
@uptechcncpvclt-13024 жыл бұрын
MASSO NEED G74 G84, FOR MILLING MACHINE WITHOUT THIS TWO G-CODE IS NOT READY YET FOR!
Пікірлер: 17
Very cool. Nice work JG 👍
0:27 what the heck? Your probe works wierd looks like you programed the movement by hand and didnt even use the probe because sometimes it triggers without having contact and sometimes when almost overtraveling the probe
Oh boy .. its here. Nice work
@kiwidude8931
5 жыл бұрын
Test Your Design neat stuff !!! We are now starting to see this product grow into something awesome
@mitchtaylor7725
5 жыл бұрын
@@kiwidude8931 Hopefully we get a few new tricks in the firmware!... Looking forward to it actully coming out!
Nice! Waiting....
Any plans to have profile digitizing, external contours and the like ?
Interesting!
How can you use popup locating pins? They are used on cnc routers for cabinet making.
Nice! Finally when do we get it?
The X and Y probing routines run backwards for me, Z runs fine. Any ideas what I've done wrong?
So i don't need to buy the haimer digital probes?
Nice. Will there ever be a surface probing cycle. Like to be able to engrave or cut on not so flat surfaces. Something like G-code ripper
@MassoCNCAustralia
5 жыл бұрын
yes, there will be, we have been making some plans for that mainly to mill circuit boards but can be used on any surface.
@radikult-custom
5 жыл бұрын
Masso CNC Controllers that would be awesome, once available I would switch my 2 cnc’s to Masso controllers. I cut O-ring grooves on acrylic and sometimes acrylic ain’t “flat” and I can not surface the face because I need the factory finish. Once “surface probing” is available I can switch from Mach3
But how do you probe an boss ?
MASSO NEED G74 G84, FOR MILLING MACHINE WITHOUT THIS TWO G-CODE IS NOT READY YET FOR!