Thanks for the video. My 'turnbuckle" had a rubber plug in the threaded end so the rod unthreaded rather easily. 1965 135MF

@thedelcodave

Жыл бұрын

That was a lucky break. I may just have to add a rubber plug to mine that is an excellent idea.

@Vintageguy73

Жыл бұрын

@@thedelcodave p.# 180982M1

Thanks

Me gustaria saber el precio del Massey Ferguson listo para trabajar en el campo.

What thread is the set screw that is removed at the beginning of the video?

@thedelcodave

8 күн бұрын

@@mr.goldsilver4649 I am unsure of the thread im sure it's standard possibly 1/4-20 but that's just my best guess

@mr.goldsilver4649

5 күн бұрын

I think it’s 5/16 thread at least that’s what I it is on a MF 135

Will water get into the transmission if the boot is gone.?

@thedelcodave

4 ай бұрын

These tractors share a fluid reservoir with the rear and the gearbox. So if your boot is missing water will get down and contaminate your fluid. The boots on the shifters will leak water directly into your transmission.

Se questa molla non funziona che problemi dà?

@thedelcodave

Ай бұрын

If you hit a rock or root with an implement the spring will prevent overload to the hydraulic system.

Is your draft control working OK now?

@thedelcodave

2 жыл бұрын

I think so. I do not have any implements. Is there a way to test it without a plow. 3 point lifts up and down as it should.

@prime553

2 жыл бұрын

@@thedelcodave you can put the draft lever in the position between the dots and the control lever in the fast or slow position. Then give that clevis at the back a good shake and pull, best with a top link on and see it the lift arms come up and down

@thedelcodave

2 жыл бұрын

@@prime553 I'll give that a try