Keep doing exactly what you’re doing! This is well detailed and I really like how you play different music with great beats so we see how the speakers drivers react! You now have a new subscriber! Great videos!

@shaktastik

2 жыл бұрын

Thanks bro, it means a lot , I also enjoy doing these videos 😊

🎉 great review. Definitely different. Pretty sure I won't be disassembling mine, but it was fun to watch. Thanks for posting.

@shaktastik

Жыл бұрын

Thanks for the great comment 😊

This is what i've been searching... i'm in. Subscribed

@shaktastik

8 ай бұрын

Thank you

Thank you showing this. Keep going

It's nice to see it's pretty straightforward to get into should I need to do some repairs or a battery swap.

Very informative, thanks!

@shaktastik

2 жыл бұрын

Thank you :)

Well done! 👍👍👍

It's an awesome speaker. I tend to grab it before my jbl flip and charge.

Happy to see Sony Walkman 😍😍😍😍🤤

Very detailed, and this video just answered what I'd concerned about the unbalanced sound ( shift to the right ) when I sat in front of the emberton to listen. I'd do the stereo sound test too , found that front panel is left channel while the back was right channel which is a liittle bit different to your test. BTW, thx for the video!

@shax_diy_hax542

2 жыл бұрын

Thank you bro 👍🏼

@aussie8114

2 жыл бұрын

It’s a dual mono so not sure how you did your test.

@JeremiahLutherPritchett

Жыл бұрын

@@aussie8114 right channel is rear, left channel is front. Not sure why you’re thinking it’s dual mono?

@aussie8114

Жыл бұрын

@@JeremiahLutherPritchett No it doesn’t work that way. Both front and rear are dual mono with DSP.

@loganmedia1142

4 ай бұрын

@@aussie8114 Marshall themselves claim it is stereo.

Thanks for the video - wanted to "upgrade" but I think I will rather stick to my Denon Envaya DSB-200 - also not a big fan of drivers set on front and back

Excellent tear down, brave man, in your opinion what is the repairability now that the somewhat serviceability has been established. What would be the first to go? Drivers? Battery? Possible drivers upgrade?

I believe you can make that one box stereo. And if switch to mono, its just like any UE boom boxes, the back bounces off walls anyways.

Спасибо за обзор).

The best thing for such design would be a using of special, one-magnet-two-coil driver like in some high tech subwoofers.

This IS a 360 degree design. The drivers fire left and right side, and you will listen to a lot of reflective sound, you do not face the driver, but rather the space in between. This is actually exactly the same design as UE boom 360 speakers. It actually provides far more stereo separation than two drivers facing forward.

Very nice, good board electronic , what tipe ic use in this board.. thanky... bro..

Buddy Al's good if you give the bord hd image attached in your videos it will be perfect 😍

can you install a mini jack input ?

Oh hey! We have the same little swiss knife, mine is kinda old and run down, do you know where i could get one of them?

Are you going to make Willen teardown video?

Btw that "star shaped bit" is called TORX (8)

excellent video bro 😘😘

@shaktastik

2 жыл бұрын

thanks bro 👍🏼

this Emberton is packed with 4 speakers WOW.👍, other bigger models like kilburn, action, ect. had only 1 driver, no good.

@ph4n1th

2 жыл бұрын

2* the other 2 are just the responding radiator

@varunshadow8588

Жыл бұрын

Square shaped are passive radiation 😂

Hi Shak do you repair Marshall speakers? If so how do I get in touch?

This is 2 inch size speaker ?

If you get distortion static from 1 bass speaker you have to tape the speaker from each corner firmly to dampen the annoying static vibration sound. A lot of bass loosens and destroyed the pliabilty of the bass speaker

@jucalu93

Жыл бұрын

how exactly could I do that? I have a issue of distortion in my emberton 2, I already tear off the speaker and use the bass spaker out from the frame and still sounding a with a little distortion

@lukelee3

Жыл бұрын

@@jucalu93use a strong tape all around the edges of the subwoofer tightly and put the cover back on over the tape to secure it and listen closely until you don't hear the distortion anymore. Took many tries.

@rodrigoalvarezgonzalez5491

5 ай бұрын

you have no idea how thankful i am, crazy how this small thing helped, thanks!

@lukelee3

5 ай бұрын

@@rodrigoalvarezgonzalez5491 the down side is you lose bass and you have to replace the tape every few months. It's a faulty bad design subwoofer by emberton, I have the marshall tufton and the subwoofers has no issues with distortion even when very loud.

Thank you for such informative video. I have a question and hope that you can advise on that. I do not like bass at all (even bass from theatre grade speakers) as that triggers my panic attacks. I prefer no bass/strong vibration from any speakers. But it's really hard to find a good speaker with no bass. I have an Emberton and I love the vocals and many factors of it. However, the bass is still too strong for me. I would be very happy to know if you can tell me if there's any way I can remove the bass from it. I just want to listen to the vocals and I don't need any bass. I am not afraid to tear it down as it's no use to me with that bass. Thank you very much.

@shax_diy_hax542

2 жыл бұрын

Your username made me giggle😂 I understand your concern, although it's not something I would recommend but for your needs you will need to remove the bass radiators or at least one of them you can see the difference on my video at 7:20. alternatively maybe try some spacers below the speakers to create a little gap for air to escape, the gap needs to be big enough so the air isn't chafing but also not too large that the drivers will touch the grills which will cause rattling. Good luck 👍🏼

@rubbish6584

2 жыл бұрын

@@shax_diy_hax542 Thank you so much for the reply! I really appreciate it. I know nothing about speaker but I am not afraid to break one. So, by radiators, do you mean the rectangular plate with round corner (at 7:30)? I only know what a driver is i am sorry (it's the round thing isn't it?!) Also, by putting the spacers "under the speaker", my only two brain cells couldn't figure out where to put it. Is it that as long as I can break the sealed "sound chamber", I can reduce the bass? Thank you!!!

@shax_diy_hax542

2 жыл бұрын

@@rubbish6584 Yes everything you said is correct there is also another easier solution is to use an app that has an EQ so you can reduce the bass.

@rubbish6584

2 жыл бұрын

@@shax_diy_hax542 Thanks so much! 🙌

@chattyinc

Жыл бұрын

I would recommend using some software EQ, such as Dolby Access, to remove all bass frequencies (just drag all the sliders for frequencies below your desired "trigger" frequency to 0). It's way safer than physically removing the bass reflex radiators, would apply to every speaker and is way more effective.

Were did you find the battery?

Which audio ic is used in it can you tell me plz

You are supposed to place it vertical, with the golden button facing you. Then it will surround from both sides to you.

@ketansaart1546

Жыл бұрын

Oh they were mono. Just found at the end of the video.

saben donde puedo conseguir reemplazo de la bocinita de adentro?

Donde puedo conseguir un speaker de repuesto? Ya que se rompio uno de mi bocina

👍🏻✌🏼🇧🇷

I don't know much in audio tech, i wonder why it use 7.4v instead of 3.7v like other brand in such small speaker, becuase i see only the bigger speaker is using 7.4v or 11.1v. even some big speaker still use low voltage but step up to higher voltage, sorry my bad english

The battery is bigger rather than I expected.

@user-sq2uh3cd4p

Жыл бұрын

I don't know much in audio tech, i wonder why it use 7.4v instead of 3.7v like other brand in such small speaker, becuase i see only the bigger speaker is using 7.4v or 11.1v. even some big speaker still use low voltage but step up to higher voltage, sorry my bad english

Hi! Do anyone know where can i buy the power controller for emberton?

Oh wow didn't know it was front and back firing drivers

Thank you for this video. I won't buy mono. I need stereo

Hola soy de peru y tengo un problema se daño la entrada de carga de mi parlante emberton como o donde lo puedo reparar ???

What about the Bose / JBL ?

Where to buy in Hong Kong?

I don't undertand why soundlink flex bass deeper in low vol and also louder in max vol, i bet soundlink driver is about 15w though it has few chip vs alot of chip in emberton and 20w driver. I prefer the the flex but disappointed bt4.2 I'm satisfied emberton circuit board, its batt life, design, and quality, but disappointed sound if compare to flex, in my country the price is the same, would you recommend emberton over soundlink flex, 🙏

@shaktastik

Жыл бұрын

The flex has better bass, the emberton has better mids and highs, I don't have the speakers anymore but from what I remember they had the same loudness. If I were to choose I'll go with the Bose flex. I also recommend the JBL flip 6.

@user-sq2uh3cd4p

Жыл бұрын

@@shaktastik thank you anyway

@user-sq2uh3cd4p

Жыл бұрын

Do you think bose flex circuit board satisfied or not

Thank you, you just save me a lot of money, I didn’t realize the single driver on one side and The fake woofer on the other side configuration. I thought it had two full range drivers on the front and two radiators on the rear.

@shaktastik

2 жыл бұрын

Thank you, I was also surprised, very unusual idea.

@aussie8114

2 жыл бұрын

Fake woofer is incorrect, it’s called a passive radiator and it’s actually an excellent concept. My $3,000 sub woofer uses it and it produces almost as much bass as the actual driver. I’ve seen other expensive sealed floor stand speakers using it as well. This Bluetooth speaker is not much good, but the passive radiator concept is a good one.

@asrr62

Жыл бұрын

Yeah who designed this a troll? It has such a cool look.

it’s no mono I have it, the back one is right and the front is left, ur computer was outputting mono bluetooth audio then. It has a speaker on each side bc it’s a portable speaker, meant to be carried and listened by groups of people from more angles (mostly 360), and with left/right when placed near a wall, makes a bit of little surround sound with Marshall’s “stereophonic technology” with sound details bouncing off the wall. Setting my phone to mono loses that effect.

Can you do a Sonos product teardown?

@shaktastik

Жыл бұрын

I did the Sonos Roam 👍

@shaktastik

Жыл бұрын

kzread.info/dash/bejne/iq2BuZqHZbrKaLg.html

@F_Bardamu

Жыл бұрын

@@shaktastik 👍

Realmente vale la pena?

@jacosta5580

Жыл бұрын

Yo digo que si. Esta fuerte para un cuarto pero no tanto como para una fiesta grande. Ah todo volumen sigue sonando bien.

Can you take the Marshall emblem off and put it on the other side thanks

@shaktastik

Жыл бұрын

Interesting question, may I ask why you asking? I no longer have the speaker so can't try this for you but hopefully someone else can answer this.

Olá 👋🏼. Acha que a Tronsmart T7 é mais potente do que essa Marshall? Obrigado.. 👍🏼

Do you know how to solder an aux input to the bluetooth module?

@shaktastik

Жыл бұрын

Unfortunately I don't but I would love to know that

@Amber57499

Жыл бұрын

Let's figure it out then :D I'll do some research, ask a few people, hopefully you too and maybe we can find a way.

@shaktastik

Жыл бұрын

Coolz I always wanted to find out a way, be aware that some companies made a USBC port an aux in port by using a USBC to mini jack adapter. Ive seen this when I reviewed the mars pro

@Amber57499

Жыл бұрын

Hmm, why not give it a try. Gotta find my adapter first.

@shaktastik

Жыл бұрын

I've tried it on my flip 6 but it didn't work, looks like it needs to be programmed to work and also may need an analogue to digital adapter chip for it to work.

Teardown is clearly visible.

to manny mono blue tooth speakers . all blue tooth speaker makers need to focus more on some stereo blue tooth speakers.

@Nogitsune_Yako

Жыл бұрын

In such a small body it’s pointless to make it stereo. If you want a decent stereo sound from small speaker, best option is to buy another one and connect them in stereo mode.

They did that because if they didn't do that the radiator there would only be one Radiator on the back

I really liked the speaker. however, I didn't get it because of the way of the speaker emplacement

My Marshall emberton just stopped working suddenly, it's like the sound only just cut off, everything works properly. It doesn't make sound even when it boots up anymore

@maromorostar6621

8 ай бұрын

After how long? Did you fix it?

do you know what went wrong, if all of sudden emberton doesnt produce any sound? neither the turn-on sound, neither the plugged-in sound.. neither bluetooth-connected sound... completely silent no matter what... out of nowhere this happened... i teardown, recconnect speakers and all, factor reset... nothing changed... Beside dead silent sound , everything else works... it charges, it connects to bluetooth, it turns on, just 0 sound no matter what ... .Did the speakers die? but then its weird that both die at same second...

So, the question is: will U get a true stereo if U pair them…? 👀

Simply, the front of such speaker is where the button is.

В мене у самого аж руки затряслися після цього відео! Як її розбирать!) Но нечего жахливого тут не має! Просто сміливіше … взяв м‘яч- пиздяч!)))

It is a stereo speaker, not mono. I was hearing it so clear when tested it with my own Marshall Emberton, so there is left and right channel 💯% ... My hearing is very, very sensitive. I don't get it why they was not put the speakers like left and right channel on the front and one big radiator on the back, lol 😂 ... Why they call it 360°when there is not like 4 speakers on the different sides and example the radiator under the speaker. There is only half of that "360°" 😅 ...

Marshall claim the speaker is stereo, but it is a very weird speaker arrangement if it is.

I Dont By This Only Select In My Life Sony Product And Japan Technology

This speaker layout is not good for stereo separation unlike bose soundlink mini ii or jbl flip 3 or 4.

hands like a surgeon....lol 😂 😂

@shaktastik

Жыл бұрын

😂

Jbl flip 6 or marshall emberton?

@shaktastik

2 жыл бұрын

JBL flip 6 for sure.

Индикатор батарейки жрёт батарейку))

Do you know where to get same spec replacement speakers for the emberton?

I already checked this guide and now I know a fake speaker I bought....my skull candy sound much better that the Marshall emberton fake...I am returning it for a full refund

@shaktastik

Жыл бұрын

Where did you get it from?

кароч какойто пам

Better to buy Charge 5

@MaxiMovier

10 ай бұрын

just compared them and charge is like cheap disco speaker

@mykyta_go5hko

10 ай бұрын

@@MaxiMovier They both like disco speaker. + ugly mono sound in both.

@MaxiMovier

10 ай бұрын

@@mykyta_go5hko sure they are way overpriced but .. marshall is acceptable for the purpose imho for sure

@victoregea5311

Ай бұрын

way worse sound quality, more suited to “parties” but way less definition and instrument separation, voice clarity etc

Menos mal que no me lo compré !!! no es estereo !!! :-(

Mine is broken, crackling noise coming out of it . Will not buy this speaker again.

I Think All Product In Worlds Only Chinese 🤪🤣😂😀😆😅😛 I Am Right

I tried to get past the terrible choice of music...but could not... try something less jarring like Steely Dan...

I think the rear facing driver is meant for bouncing sound off wall.