Man Transforms Plastic Drums into an Amazing Boat | Start to Finish Build by
Ғылым және технология
Watch as a skilled craftsman transforms ordinary plastic drums into an incredible boat in this captivating start-to-finish build! Join us on a journey of creativity and innovation as we witness the remarkable process of turning simple materials into a floating masterpiece. From conception to completion, witness every step of the transformation and be inspired by the ingenuity and dedication behind this amazing project. Don't miss out on this mesmerizing showcase of craftsmanship and resourcefulness!
We hope you enjoy your time on our channel. Tell us which topic you would like to see and we will definitely consider it
If you like our content subscribe to the channel and activate the bell button
Thanks for choosing TechFreeze
araujo kayak
/ @araujocaiaque
Music: Epidemic Sound
www.epidemicsound.com/referra...
Пікірлер: 414
13 years ago, I designed a 17 foot canoe that used two 4x8 sheets of 1/4 inch CDX plywood & two 20 foot spruce 1x4's. It was a project with my 15 year old grandson. We designed it "on the run" with only fewbasic sketches to convey the basic ideas. It turned out very good. Only wish we could've afforded marine plywood. Over the years stored on saw horses outside, some entrapped water allowed rot in a few places. It is a "one off" canoe, like no other on earth. Until he gets inspired to renovate it & put fiberglass instead of the paint, it is shrinkwraped & hung from the ceiling of a shed. Getting married & other things of life has allowed it to be set aside. We were so proud when it was first put into the river for it's maiden voyage & it performed better than we could have hoped for. 😊
@juanmanuelpastrana6955
Ай бұрын
Que bonito recuerdo. Admirable. Me recuerda a la relación que tenía con mi abuelo. Espero tengan muchos más proyectos juntos
@philthycat1408
Ай бұрын
Memories 👍🏻🏴
@rudeawakening3833
Ай бұрын
Good for you , sir ! Priceless experience you both will never forget …
Не будь дырявым старый таз, длиннее был бы наш рассказ ;)))
@epurhl_kondubeev
Ай бұрын
👍🤣 с языка снял..
I built my first boat with my father when I was 12. It was an 8 foot Pram Dinghy. It was a great little boat. I learned a lot about woodworking from my father. I miss him and my first little boat. I wouldn’t trade that experience for anything in the world. Watching this video brought back a flood of great memories. Thank you😊
Meu amigo Você e um engenheiro de verdade,parabéns pelo seu trabalho 👏👏👏👏👏👏👏👍👍👍👍👍👍👍👍👍👍
@oPietersonDBD
Ай бұрын
@@HighTech.360 sim, é bem bonito o barco dele, mas eu nao entraria, parece q vai desmanchar, assim como o submersivel aceangate
Very interesting, but nailing the plastic to the frame will not last. As the boat is used, the nails will gradually pull out. Screws would work much better. Also the joins between each piece of plastic have to be sealed against water coming in. How do you do that? Some kind of tape or adhesive or liquid that you could melt with a heat gun might work.
THE BEST BARREL BOAT I'VE EVER SEEN. THE CRAFTSMAN IS A GENIUS.
That thing will leak like a sieve at the seams. Poly has to be heat welding at the seams with a nitrogen gas feed. No adhesive will "stick" to poly for long.
@PulseCodeModulate
Ай бұрын
Actually, hot glue sticks really well to HDPE and in water will never come loose due to cool temperatures.
@MG-bj1kv
Ай бұрын
@@HighTech.360 Да, я думаю, за безопасность можно не беспокоиться. Вспомни как совсем недавно батискаф около Титаника раздавило. Вот там да. Погрузились на самодельном корыте на большую глубину. А тут, даже если эта лодка развалится, ничего страшного не произойдет. Главное спасательный круг с собой возить 😅
@makewhatyoulike119
Ай бұрын
Resourceful and clever! thanks for sharing, that's awesome
@carlosalbertoguzman
Ай бұрын
Lo mismo me pregunté, tendrá filtraciones de agua 😥
Давайте скинемся ему на шуруповерт штоли) ну какие гвозди))
@Evgeniy1411
Ай бұрын
Шурупы и прочие саморезы - не всегда хорошо.
@ruslanumutkuzhin8200
Ай бұрын
гвозди из нержавейки, простые в гидроксид за лето.
@adrianoboero9381
Ай бұрын
Bel lavoro, però personalmente avrei messo due costolature sul fondo per migliorare la stabilità 👍
Ещё и плавать может, классно, спасибо за видео
Not only recycled barrels. With a sense of Beauty.
Интересный проект, амиго!
Really glad to see the deck added to step on. Was worried about someone stepping on the drum hull and the bottom nails coming loose.
По сути, человек нашел материал в виде бочек.Им мог быть любой листовой материал,но видимо бочки оказались доступны.Все равно уважаю мастера
Главное ведь в чем, человек из подручного материала, минимум инструмента - дал вам надежду, что и вы можете сделать а может и лучше.
Как уже заметили другие комментаторы в России такие бочки стоят немало,потому что им найдется не мало применений. Дешевле купить листовой пластик в магазине. Кроме того попадается всякий упаковочный материал с подходящими свойствами. У нас иногда упаковка лучше чем содержимое.
@Mokytei
Ай бұрын
По 800 руб б/у 200л бочки, это дорого?
@user-cc4sp4fd3s
Ай бұрын
@@Mokyteiда и новая 2 рубля😂
@user-cc4sp4fd3s
Ай бұрын
Меня удивило что он сперва смонтировал а потом стал пропитывать, но ведь не везде доберёшься
@SeloUrala
29 күн бұрын
@@Mokytei с чего 200? у нас 1500-2000р. Железная бочка 500 р.
Мужик! Если бы ты. Участвовал бы в строительстве. Титаника. Он точно бы не потонул
@Terraforming1
Ай бұрын
Не смог бы отплыть?)
@psevdonimu
23 күн бұрын
@@Terraforming1 утонул бы прямо со с стапелем
У него даже торцовка самодельная😂.С теплом из Сибири ❤
@user-nz4us8qu8p
Ай бұрын
Ты почему не на СВО ? Аболтус
У него там есть склад с бесплатными бочками ?!)) 😂😂 У нас такие бочки стоят 25 $ за штуку))
@user-ye2dg4mm5d
Ай бұрын
Они везде так стоят. Дешевле только прям грязные из-под чего-то трудно отмываемого
@dmitrykoshel8105
Ай бұрын
не - тут самое смешное что этот деятель пробивает их гвоздями, в то время как есть простейшая технология пайки этого материала, это же полиэтилен. А шпангоуты можно было бы вклеивать или так же впаивать в уже цельный корпус.
@user-fr6ep8uy1f
Ай бұрын
Ждём в следующем видео:"байдарка из стекло арматуры,хомутов и стрейч пленки!"🎉
@user-ye2dg4mm5d
Ай бұрын
@@user-fr6ep8uy1f адвокат Егоров уже делал такое
@6yryndyk609
Ай бұрын
@@user-fr6ep8uy1f из плёнки уже есть)
A very nice alternative to using (now very expensive) plywood sheets. 👍Bon voyage! 🇬🇧
Bravo , você é um engenheiro e artesão de alma 👋👋👋👋👋👋
Thank you for the update, TechFreeze..!! Amazing, amazing work of the craftsmanship.
Luar biasa kreeen banget bosqu, semoga sukses selalu
У нас сейчас наверно дешевле купить надувную лодку в магазине. И не заморачиваться.
@user-hf3fh6vr3w
Ай бұрын
Ключевое слово::НАВЕРНОЕ ::
как он добился герметичности стыков? только за счет гвоздей и резинки? онож потечет через пару дней когда гвозди расшатаются
@user-pj6li5mp9o
Ай бұрын
ещё и переломиться по стыкам.) Смелый чувак!)))
@andrushkoandrushko
Ай бұрын
а видео-то уже снято!
@user-uq9tc6vb9h
Ай бұрын
Оно потечёт сразу же, после спуска на воду. Скорее всего стыки пропаиваются, только автор почему то этот процесс не выложил.
@user-uq9tc6vb9h
Ай бұрын
@@user-pj6li5mp9o там за этот момент как бы отвечают бортовые стрингера.
@alexanderk.2232
Ай бұрын
да резинка и гвозди. безумие и отвага =))
В России такие бочки хорошо идут под воду на даче, они прослужат не один десяток лет
@user-le2ss3lw2m
Ай бұрын
У меня такая бочка просто стояла в гараже. Через 10 лет стала хрупкой, при том что окон нет и есть отопление.
Excelente vídeo 👏🦅
I really enjoyed watching this build, the use of those plastic barrels is a great idea. Much more resistant to damage than wood and fiberglass I think. We have a lot of coral here and we would need to slowly find our way around them because of possible damage to the wooden hull then the thought of needing to repair. I use my plastic kayak without much difficulty in the same situation. This plastic boat would be ideal. Thank you for a great video!!!!
1:05 гусь в текстуре застрял Плохая прорисовка😂😂😂😂😂😂
Brilliant idea! Result is amazing😉👍🏻
Молодец 🫵👍🤝
Я не плавал бы на этом по середине реки.) Это корыто переломиться по стыкам в любой момент.)
@user-uq9tc6vb9h
Ай бұрын
Бортовые стрингеры как бы держат корпус. На честном слове конечно, походу автор про сопромат даже не слышал нигде.
@user-dh3og8jx9u
Ай бұрын
😂 Ну вазми сабой камеру от авто грузовика ,если разломится попалам лодка из бочка.
@user-cw6pu1tk8o
Ай бұрын
Строительство лодки начинается с киля. А его здесь нет🤣. Планшир в роли каркасной детали, так себе идея. Пластиковая обшивка держит шпангоуты😅, а не наоборот. Про гвозди говорить не буду. У автора очень своеобразное понятие о сопромате и конструировании😅. Хотя, как способ убить время, вполне подойдет. Только далеко от берега на этом "Титанике" заплывать категлрически не рекомендуется.
не- зто точно не вариант.....гвоздики...что они удержат? все развалится в ответственный момент...ладно ,повисилил,и на том спасибо!😊🙃
@eugenrussia7155
Ай бұрын
пофиг)) чел - хайпанул - это главное! )))
I Hope my fellow Filipino fishermen will see these kinds of ideas on how to use or recycle plastic drum
Отлично , правильно!!!
Excelente
Hello sodaraku luar biasa hasil perahu dari drum plasticnya sangat bagus sekali👍👍👍❤🎉🎉
Excellent job well done sir Wow no that's a boat and what an amazing achievement to have built it's true a man who has a shed is well in the head. Blooming marvellous boat.
Mis felicitaciones mi señor, el ser humano necesita mas soñadores. Dios lo bendiga.
I love the ingenuity. The things people can do if they just do it.
@user-oz4sg7tw1j
Ай бұрын
А космический корабль он может сделать из железных бочек ? Или тазик только из отходов тары. Племя тумбо- юмбо-барабан у которых запас словарный 200 слов может этому научиться в течении 2-3 месяцев. И даже молоток могут на свалке отходов найти и гвозди кривые. А старую рессору от автомобиля разогреют на костре и это станет паяльником. Удобная и дармовая штучка для вылавливания мутанта рыбки из загрязнённого химикатами водоёма. - Ноги в воде не расплавятся от кислот.
@catsupchutney
Ай бұрын
Try and repair holes in HDPE , you need a reducing flame, and no oxidation, special epoxy. Problem is extremely low surface energy.
@brokenrecord3523
Ай бұрын
@@catsupchutney I can see that f you want to bond the plastic. Mechanical repairs, much like the inner tube,gasket are probably the way to go. Also, have you ever tried to poke a hole in a plastic drum? I'm thinking these boats are pretty robust.
Watched my grandfather build a canoe from plastic barrels even added a Kiel in center of bottom !!
@Bulbash86
Ай бұрын
Из какой вы страны?
My compliments on great creativity and eco-friendly idea. Very good idea, and forever design.
@user-oz4sg7tw1j
Ай бұрын
Могу подсказать как сделать эту лодку погружной на глубину 2 метра и дышать в ней пока рассматриваешь рыбок в иллюминатор . Фотоаппарат не подскажу как сделать - и он его не сможет сделать. Пусть рисует красками из глины этих рыбок.
Excelente idea y muy buen trabajo,felicitaciones amigo!
Boa tarde ficou top seu barco ⛵️ irmão que Jesus abençoe vc
Great job!
Wird Zeit sich einen Elktronagler oder Tacker anzuschaffen 😂
Muito bom muito inteligente meus parabéns 😊
he is here from our Brazil. A hug to everyone.
That boat must be a barrel of fun.
Once the sections of the barrel are nailed to the ribs of the canoe would it maybe be an idea to go along the drum where the nailed edges are with a heat-gun? Not to melt it but just so that the plastic readjusts to it’s new shape and isn’t putting unnecessary strain on the nails as it try’s to spring back to its original shape? I dunno. Seems like a good idea to me with my limited knowledge of plastics and physics.
@user-to9mm5cy6m
Ай бұрын
Hello, I have a side business as the devil's advocate so I think nails will come loose if you take the stress out. Only try will tell.
Не дешевле взять лист пластика и сделать лодку. Чем сначала покупать бочки, деласть из них листы а потом лодку😂😂😂😂😂😂
A sabedoria do Homem. Vem de DEUS Mesmo !
Beleza muito bem 👍👍
Such a great use of old plastic barrells . Good diy skills ❤👌
All done with antique tools. When I was 15, I built an 8' hydroplane called The Minimax from Glen L plans. It weighed 72 pounds and would haul ass with a 15 HP Johnson, twice the recommended horsepower.
@o9rgeronimo979
Ай бұрын
Hampton VA?
@99bx99
Ай бұрын
@@o9rgeronimo979 Nope, couldn't be much farther away.... White Salmon, WA and the mile wide Columbia River.
In the name of God, God willing, Blessed be the Most Merciful, may God grant you success
Parabéns pelo capricho
Buen trabajando felicitaciones
Aqui é Rosa do canal chega o zoom, o homem sempre surpreende com suas criações 😊
Excelente excelente gracias
Easily the coolest project I have seen in a long time. Thanks for posting. Jeffrey Z. in SC
Creating your own products is the best way to protect resources. Take advantage of plastic containers and get creative with it. It's great to swim in the river
Excellent ! 👌👍😍
muy buen trabajo la verdad
Отлично получилось!
He just discovered another perfect way for recycling.❤❤❤
@user-to9mm5cy6m
Ай бұрын
? before he started the barrels could have been used for storage for years. Now next season, when the leakes come in (rusting nails?) they go to the dump.
What is Fibreglass Boat 😮❤❤❤ Amazing video
Brother, you're a genius
Vac. formed PE drums are actually quite thin, easily punctured by a branch or stone, and virtually impossible to fix holes in. Rotomoulded kayaks and sit on tops are generally thicker and multi layered.
THAT'S REAL SKILL GOOD JOB
Ingenioso el hombre
Está isolado da água pelo simples fato de estar pregado na câmara de ar? nossa nem imaginava.
Excelente idea 👍
Ingenioso !!!
He is very experienced in shipbuilding. I like this.
Всё на гвоздях.... Эх прошлый век...
@user-hf3fh6vr3w
Ай бұрын
подвел итог один чувак лежа на диване
@AlyesKukharev
Ай бұрын
@@user-hf3fh6vr3w И всунул свой пятак, чувак сидя на толчке) Сиди дальше) Вода и гвозди, не совместимы! Изучи матчасть. А ты чем мотивируешь?
@nikolisn
Ай бұрын
Раньше ещё гвозди в костре жгли когда с дерева полностью 8метров делали . А щас саморезы и гвозди я тож бью
MUY BUENA IDEA DE FABRICACION FILICIDADES
Muito show!
Genial.....haré uno
Muito show 😊
Great idea and very durable, i want one.
Bravo
Very intalegend 🎉🎉🎉
Вчера видел этого мужика на рынке - таранкой торговал.
@user-dv1rg7oq5r
2 ай бұрын
На лицо явный прогресс . До этого он деревянными буями торговал и пластиковыми бабами , синими в стиле фильма " Аватар " .
Excellent work !!!
Logically it appears all well, but theoretically speaking, those iron nails along the bottom seams, will over time, with exposure to water, give way , leading to water ingress. Its better if the plastic seams are flame welded for water tightness, and a few nut bolts amongst those nails will make it more reliable. That water drum in the front has probably been filled with sand or gravel in order to counter balance the weight of the man and the motor behind, which is not the case with a wooden canoe. Finally, i recommend a prayer and a life jacket along with the BOARDING PASS 😂
I built one of these except instead of plastic I used an old pallet and a baby stroller and built an unpowered downhill go-kart.
Bravo mec! superbe travil! ;-)
This is durable
Muy lindo👌
Натоящий мастер
Гвозди как я понимаю тз нержавейки наверное, а то заржавеют же 👍
WELL DONE ON BOTH THE CANOE AND THE VIDEO. EXCELLENT ENTERTAINMENT AND INFORMATIVE.
Kratifität kennt keine Grenzen
Is this to the next level. Name please. Plastic drums.
самое тяжёлое наверное было сделать первую лодку и лекала!
Nice music, thank you for not choosing techno loop garbage!
kỹ thuật giỏi quá, thật khâm phục
Excellent good idea. Your are handyman. This idea can help a lot of poor people
He is really Professional
Отличная работа 👍