Makita's New XGT Spanks Everything We've Tested - GWT01Z
Автокөліктер мен көлік құралдары
Our lifetime of TOOL RANKINGS torquetestchannel.etsy.com
Our store with Teal Team Shirts now! bit.ly/3z98ryF Link to XGT: amzn.to/2VtvpkF The Kit is an even better deal: amzn.to/3Gx5v29 M18 3/4": shrsl.com/30tie Images of what's on the shirts we've designed: bit.ly/3vBCwnF The all new to the U.S. Makita 40V XGT GWT01Z is finally on the scene, and who better to take on than the Milwaukee M18 FUEL 2864-20 3/4"? There can be only 1 winner, and this one is not very close.
~We earn from qualifying purchases when using the affiliate links here~
Пікірлер: 569
Makita is using your vid in their advertising. You would think they would have given this to you for free….
@TorqueTestChannel
3 жыл бұрын
We don't accept any free tools or sponsorships, but appreciate the sentiment!
@nathanenns7186
2 жыл бұрын
@@TorqueTestChannel they should at least be sending you some royalties then lol
@wswiii3663
2 жыл бұрын
Òòòòooòooo
@kevinzki21
2 жыл бұрын
@@TorqueTestChannel Not for sponsorship, but the time and work you put into the comparison that they are using so they can make money.
@ericg4915
2 жыл бұрын
The whole reason they are using him is because he's a trustworthy source. If he started accepting tools and sponsorship then he would lose all his credibility
The makita looks like it was still climbing !! Run that test at 20 and 15 seconds !!
Damn they actually pulled it off!
@WineScrounger
3 жыл бұрын
Twisted it off ;)
@GamingwithIinfected
2 жыл бұрын
Took 22 more V but yea
LOVE IT These are the tools the Makita XGT 40V platform was intended for - heavier-duty applications. In my testing, the 40V 1/4" impact driver wasn't anything too special, the brushless hammer drill was excellent but not revolutionary. But larger impact wrenches, breaker hammers, and construction site equipment is where Makita is going to make a killing on this platform.
@EVnewbie
3 жыл бұрын
I fully understand why Makita DOES NOT increase the power of a impact driver with the 40V over the 18V--because once you exceed 2,000 in/lb of torque you start breaking bits, 1/2" adapters and so on. The Milwaukee does go over 2,000 in/lb and breaks adapters all the time which is not a good thing! Realistically, if you need more power than the 18V for an impact, use an impact WRENCH to prevent breaking bits, parts raining down on people below or pieces of sharp tool steel ripping holes in your hands or face. I used a huge Hilti industrial hammer drill to cut a 1/4" hole through drywall to hang a picture--it worked but power is nothing without control. Makita has a 36V 33.5Ah backpack bettery that powers 36V X2 and 40V Max outdoor power equipment so it would be fun to see what it does on impact wrenches or cut off saws! Come on Philly....see if you can kill the 1,200 watt hour backpack battery before you get carpal tunnel....for science! ;)
@pete_lind
2 жыл бұрын
And if 40 V is not powerful enough , Makita has 80 V tools too , 2 x 40 V battery :-)
interesting that in USA Milwaukee are the defaul and the Makita the runner to catch. Here in Brazil Makitas 18V are the defaul with Milwaukee running to catch in the premium market. But have to buy new batteries and charger for 40V is a pocket drainer. The fact is that some new XGT makitas surpasses all other brands for heavy use like this impact tool test demonstrate. For metal the 40V XGT cuts near 30% faster than my 18V angle grinder. The 40V nailer is comparable with pneumatic nailer... So, it's expensive but taking of the burn to have to invest in a new line of batteries the XGT makita is impressive and the way to go for heavy applications. The 2x 40V concrete tools are equally BEASTS, even compared to top gas tools. Expensive but good.
Everyone in the comments: The M18 3/4" needs Hight Output batteries Milwaukee doesn't sell it with! Meanwhile: The Makita with the 2.5ah 18650 pack it comes with matches a damn M18 1" using the XC8.0 HO. The whataboutism is real
@jerth
3 жыл бұрын
One really important thing that people might be missing is that comparing a 2.5ah 18v battery to a 2.5ah 40v battery is apples to oranges. The amp-hour ratings are kind of meaningless to compare like that. One battery pack is just wired with more cells in series, but it's still a huge pack that is comparable to 6.0ah 18v battery packs.
@DESX312
3 жыл бұрын
@@operator8014 Would have been nice to see this tested with a high output battery, but I think that was the guys point. If the 1" is barely beating the 3/4" Makita with an XC high-output battery, there is no chance the 3/4 is going to sniff at the Makita 3/4 with the HO battery regardless.
@PistonHonda87
3 жыл бұрын
@@operator8014 It would make more sense to compare them in the same class and watt hours. Tools prices will always vary from quality, name recognition to being brand new.
@cndlpwr
3 жыл бұрын
These tools will always be directly comparable in some respects and incomparable in others. We can see the raw performance, after that there are several categories to classify them in. One would be kit for kit, stock batteries, right out of the box. Another would be the tool with the best battery available from the manufacturer. There are several other metrics that COULD be used to create comparos, and finally perhaps a fully subjective score or “seat of the pants” feel for the tool..Things like balance and trigger control that can’t be measured at full tilt on a test bench.
@gilraine1225
3 жыл бұрын
your also assuming people only use that exact battery with that exact tool. my milwaukee 3/4 is noticeably stronger with a 8.0 on it. most of us have a bunch of tools and batteries
Going with team blue
Makita impacts continues to impress.
@PREDATOR07
3 жыл бұрын
The voltage is.
@whatfreedom7
2 жыл бұрын
Yet Makita is getting scarce in the stores. They don’t sell a whole lot of Makita stuff like they used to. Now they push Milwaukee way more.
@AATreeService
2 жыл бұрын
Price is killing them sadly
@mguerra310
Жыл бұрын
Makita sux
@jordanalexander615
Жыл бұрын
Each brand has there moments. Someone is always trying to be the best at a certain tool.
I've been eyeballing this 3/4 since I heard Makita was making it. I'm definitely getting it over everything else on the market.
@maybeonlysometimes
Жыл бұрын
Did you end up getting it? How have you found it? Wondering if it's the way to go for putting a lot of long bugle heads in all day or if it's overkill 🤔
@LaSouthernGemini
5 ай бұрын
So did you buy it? Some of us want to know.
Upgraded from an older 18v kit. kzread.infoUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.
It's Friday which means another great video from the TTC! Thanks as always for all you do guys. Keep crushing these videos 💪
Been watching these vids for about a month. I tend not to focus on comparing brands spec numbers because price is much better used for reliable power instead. However, even though this style is overused, your vids are pretty great, and I do still get a lot of useful info from them! Not to mention the natural attraction to torque number comparisons lol. Either way, this whole time I thought this was a ~ a million sub channel that I'm late to the party to bc that's usually the case. But man.. I'm happy to be here and discover these vids when you're not even at 100k! Ik it's hard to see but you're gonna hit a million man God willing. Consistent vids of this quality over several years like yours always grow a channel to those crazy numbers so long as you touch the algorithm once or twice. Crazy that I'm so early to this channel!
I ordered this same kit from Max Tool about a month ago now. Paid $646 total with taxes. No regrets, The XGT series is for real.
I love how all these company’s have been slowly catching up to Milwaukee and surpassing these models that were released. Can’t wait to see what Milwaukee has next!!!
@ericg4915
2 жыл бұрын
Milwaukee has been using the same 3/4 for awhile and makita is brand new so it's not much of a comparison. Milwaukee will drop something soon and take back their #1 spot
@esellanta
2 жыл бұрын
@@ericg4915 exactly, waiting on Milwaukee’s new Gen model before running and buying the makita
@jayquick6520
2 жыл бұрын
@@esellanta This Makita just bested Milwaukee’s 1 inch model lol. It ain’t gonna happen. Buy the Makita. While you can. Also it’s best to start your Makita 40 volt battery collection now. It’s just a platform that is more powerful. Smaller tools don’t benefit as much from it but big impacts or drills etc. will.
@pflaffik
2 жыл бұрын
If the massive 1" Ingersoll taught us anything it is that 18v doesnt cut it. Remember the 1" waukee need an 8ah battery to perform well, the required current is challenging to transfer to the motor, even the 12ah M18 battery is a limiting factor. Such high currents causes voltage drops, less voltage to the motor means you need to compensate by upping the current, causing even less voltage to the motor, and then they hit a wall. If waukee can counter this XGT it is not at a similar size, and if it is same size then overheat issues will be looming. Still, even with 2x18v batteries its a win if they can do it, but i agree with Jay Quick, this is a great reason to enter into Makita xgt ecosystem. I already got all 3 xgt impact wrenches and 6 other xgt tools, no regrets but i do miss the lightweight 2ah LXT batteries, no small batteries announced for xgt yet.
@SkilletsUSMC
2 жыл бұрын
Makita was the original though. We had them going back to the 12v and 14.4 with the red NiCad batteries. I got my first 18v Makita in something like 2007 or so (looks tired but still works). So no one is catching Milwaukee really. Makita returning to the front.
Wow...I think I need to stock this one in the store to replace the large LXT. I was so impressed by your mid torque video I had to revamp my impact lineup to include it. Although I must not be the only one, they were backordered till July, and I ordered them a little after you posted your video so a few weeks ago. I think I'll do the small and mid torque LXT's, and the High torque just stocking the XGT. Makita also announced 8.0Ah XGT battery packs the other day, cool stuff
This channel and project farm are the most useful tool review channels I have come across.
Got my two shirts yesterday, not only are they nice and thick quality they fit like a dream!
@TorqueTestChannel
3 жыл бұрын
Thanks! Yeah we wanted shirts you could work in that won't stretch or rip
@relaxationispossible1593
3 жыл бұрын
@@TorqueTestChannel 100% and much appreciated
@Mrmareen19
3 жыл бұрын
@@TorqueTestChannel would you be interested in trying the XTR 24v kobalt 1/2 in impact wrench? I just ordered one and would be able to send it to you to test out new with a couple different batteries. Claims 1200 ftlbs
So glad to see y'all thriving so well!
You have to remember the prevalence of left hand thread lugs on large trucks when thinking about forward vs reverse torque on these large drive impacts. Having more "Forward" torque is actually preferable for this, A left hand thread lug tightened by an air impact will usually be tighter than a right hand thread lug tightened by the same impact due to reverse bias in most air impacts.
I have been using that 3/4 inch 40v makita gun for about a year and a half now. There isn't much she can't undo. Bushes with a UJ and extention to get in there, no problem. Hub nut torqured to 1100nm. Needs a fully charged battery, but she does it. Big bessie has made my life so much easier.
That Makita 40v is a monster!
I am in the milwaukee tool line, but I am by no means hurt by seeing this. Good on makita, the competition among all the new impacts is just going to make the next gens better across all brands, in the end we all win.
@sonidoa.c.g3884
3 жыл бұрын
Hey brother don feel bad, I’d prefer Milwaukee all the way up
@sonidoa.c.g3884
3 жыл бұрын
Milwaukee reliability and durability it’s the best
@AATreeService
2 жыл бұрын
Only took 3.5 years to beat it by a hair
Things getting pretty wild on the TTC!
Makita knocked it out of the park, good for them 👍🏽 Let's hope during the Black Friday holiday season some deals will surface.
@jimmymac601
2 жыл бұрын
Absolutely. Like the great deals we could get on 36v tools would be great.
@user-vm6mw6du8m
2 жыл бұрын
I don’t see any Black Friday deals for the Makitas???? Anyone
@bcabrera971
2 жыл бұрын
@@user-vm6mw6du8m they don’t have any impact wrench deals
@pflaffik
2 жыл бұрын
@@user-vm6mw6du8m Only the Makita bluetooth speaker and the home owner socket set. Some minor discounts on old 18v LXT tools. Black Friday is more about ok deals on mainstream products, how some expected XGT to go on sale is beyond me, thats not how they do it except for a very limited stock, like "10% OFF to the 5 first customers to buy 5 XGT tools".
Makita makes a great things! Awesome results!
3:11. When I realized I suddenly like teal more than red.
@Whateveryouwannacallme
3 жыл бұрын
That’s also when Milwaukee fans realized they liked white more then teal.
@kurtusky13
3 жыл бұрын
That makita green has definitely got torqued up.
@Whateveryouwannacallme
3 жыл бұрын
Dudes they like dudes that was my joke.
Talk about a beast, keep up the good work!
Great video, y'all! Very impressed with this Makita!
Very interesting results🤔 Great video boys👍
Me with absolutely no need for a 3/4” impact and am a Milwaukee fan am having a hard time not wanting to buy this tool.
@CBtheMechanic_
3 жыл бұрын
Same 😫
@youngrevival9715
2 жыл бұрын
True if they make a 1/2 inch version I’m going to have major problems
@jamarallen08
2 жыл бұрын
I was definitely struggling until I gave in. Now I’m trying to find things to fix 😆
@mouaxiong8618
2 жыл бұрын
@@jamarallen08 fix my 2az fe toyota motor please.
Love your channel. Just bought a t-shirt. Keep up the good work fellas.
Thanks TTC. Now I just gotta wait and see which battery I need to get for it when I buy one.
I was so excited when this video popped up and I was very impressed. I'll definitely be getting that XGT
Not surprised by Makita. I do steel erection and iron work for a living and until cordless got good in the last couple years we always used Makita corded 3/4 in impacts for anchor bolts. They were brushed but they were easily swapped out and serviceable. I think they hit harder than what they actually were rated at
Respect to the Makita fans... I'm impressed
@fredygump5578
3 жыл бұрын
They have their moments. Like back in the day when they released their tiny (for the time) impact driver with light weight batteries....when I was still using a giant/ heavy Milwaukee 1/2" drill w/ nicad batteries. A game changer for sure. Everybody else was chasing them for years.
Thanks to guys like Yourselves and that grinning cat over on Project farm , you keep these companies cranking out wicked toys for us 50 year olds
Totally agree, undoing seized nuts IS THE MOST important aspect of a rattle gun, period.
I've already worn my TTT shirt twice this week! #representing
@TorqueTestChannel
3 жыл бұрын
The real MVP is always in the comments
@____MC____
2 жыл бұрын
Thats extra spankings for you!
Video is very good. Not long ago, because I needed to buy a torque drilling rig of the Renhotecic brand, I used it for a while, and it felt very good to use. It is recommended that friends in need can try to prepare one.
The NEW Makita high torque dumbbell! 😁
I like how the intro is a 4.5 inch grinder with a 6 or 7 inch disc!
Love that you added the 6.0 battery test, I will be looking forward to purchasing a 6.0 to make my 3/4 Milwaukee even more powerful. Need all the power i can get removing lug nuts from semi's and trailers.
@otm646
3 жыл бұрын
Run a torque multiplier and never look back.
@AATreeService
2 жыл бұрын
The 4.0 amp hour at 40 (36) volts is more like 8.0 at 18. So should be tested at 9.0ah
I’d love to see the Cornwell 3/4 air impact. I believe it’s made by IR
Wouldn't mind having all that m18 stuff, but I've always been partial to the feel and features of makita.
I want to see you test the Ingersoll Rand W7152 it's supposed to out perform the Milwaukee 2767 by a good margin.
Thanks for the good review. This thing is a beast at taking off things from stuck on torque nuts on peterbuilt axels to stuck on hydraulic covers that I had been using something like 7 feet of extensions on a breaker bar to get loose. It consistently gets things loose that the Milwaukee 1/2 and 3/4 can't which 3 guys in the shop I work at have. It also tends to take lug nuts off faster than the 1 inch Ingersoll Rand air tools the shop supplies. It still works fine after having it for about 10 months and I would recommend people who are looking for a high power impact to consider this. Down sides? I have to keep the second battery charged and it seems to lose some power when the battery is less than 4 bars of power which happens after about 2 wheels or taking on and off 20 lug nuts. Been using the 2.5 amp hour batteries just for reference. AKA It hits really hard for a bit but it is lacking in endurance.
Awesome video again! Keep it up
Do correct me if I am mistaken: The Milwaukee 1" wrench is a trades replacement for pneumatic installation wrenches on-site. At least that's how it was described to me by reps. If my assumption is correct, it would makes sense that the beans are all forward by design. If I am incorrect, please disregard this comment and have yourself a darn good weekend!
@brennanlukas5467
3 жыл бұрын
This true, it’s not really meant for the mechanics world, more steel fab and other construction applications
@ezrawaters6653
3 жыл бұрын
You are correct. The M18 1” D-Handle, on the other hand, has more reverse torque in mind for giant lug nuts, heavy machinery repair, etc
@Hansengineering
3 жыл бұрын
I used the Milwaukee 1" in this video, and their "chain saw" impact today at my job building Starship. As per usual for the gulf coast, we had to break a bunch of rust to get the fuck off huge rocket hold down bolts free, and then run the guns a bit in forward to get some torque on the bolts before hitting them with a torque wrench proper. Breaking the bolts free is *absolutely* the priority, because if the impact gun doesn't do it, then we'll have to do something REALLY ill advised like find a breaker bar and hook it up to a come-along or a truck or boom lift. Observations: XC5.0 batteries are hot garbage. Any sockets that aren't 1" native are just requiring you to sling around more weight for not much more delivered torque. Passing the smaller 1" impact up and down ladders was easier than the "chain saw" impacts.
@Auriam
3 жыл бұрын
@@Hansengineering Dude. You're a *rocket mechanic*. That's pretty sweet.
You guys plan to review the 1/2" Makita 40v mid torque impact wrenches? Thanks for this awesome, extremely useful content btw.
that tiny makita is a moster :O
Lotta beans. Wish this channel was around before I started buying tools!
Brilliant! Thank you !!!
Y'all should test one of my scrap yard salvage 3/4" air impacts and see how a $5 IR model stacks up!
Recently got the XGT impact for working on my Unimog, lots of 600NM rusted in hex head bolts this makes easy work of. I'm using the 5ah battery that came with the Makita 40v chainsaw which is also awesome!
I love how all these company’s have been slowly catching up to Milwaukee and surpassing these models that were released years ago. Can’t wait to see what Milwaukee has next! Makita is definitely a tool for the pros
Ya I have been saying voltage matters because with the same gauge wire you need a lot less current but you can get a lot higher wattage I'm surprised we haven't seen more from the 24v tools the kobalt and flex but they are doing alright
Excellent video as always. I am surprised that Makita didn't offer it with an adapter that lets one use two 18 volt batteries to give you the same 40-volt battery with more available ampacity that should be even more performance. obviously be more bulk as well but to be more enticing to those who don't want to invest in a whole new platform.
just an interesting on the performance of the m18 1". apparently its design was more for assembly of large scale civil construction rather than automotive disassembly. however the new d handle has been made specifically for mechanics.
Wow, I am gonna have to save up and try out some of those new 40V instead of getting the LXT high impact!
Dont forget about the Hikoki wr36da (Metabo HPT) might not beat theese great tools but it is IP56, would really like to see it tested
I’m 25 going on 26. I was raised on Milwaukee power tools but I rode dirt bikes and one of my favorite riders was sponsored by makita. I think I’m gonna re-outfit to makita.
Team Teal swings the hammer and crushes Team Red in the .75" drive Olympics. Well done Makita.
now that is a very useful tool. sensible size, sensible power and 3/4 drive is very affordable and common socketry . Big truck and farm/construction equipment guys going like this mobile and in the shop . Is likely a 1,000+ft-lbs on the bigger battery ...
I only have a cheap corded impact, but MAN is this exciting
I'd like to see if there is any difference on the makita's power with a bigger battery. Testing it on their 2.5Ah battery and Milwaukee's High output 8.0. I would imagine Makitas 5.0Ah battery has a bit more oomph.
Can’t wait for more air hammer videos!!
Should try to test the IR W7152. Tried one, and it Beat my M18 2767-20. Or IR W9691 which they clam will be the world's most powerful cordless impact when released.
You guys are awesome!!!
I'm really interested to see how the impulse style of impact drivers perform. They're main claim being that it's a sustained torque vs hammering effect, so would it seem more linear than the exponential style of traditional impacts?
@TorqueTestChannel
3 жыл бұрын
See our Flex episode. They won't dyno. They shut off at max torque, we think to avoid cavitation damage or something
Thanks for the tests. May I ask if you have any idea about noise level in dB? Thanks in advance!
It would be intresting to see the 8.0 on the makita
I literally got my fuel 3/4 yesterday haven’t used it yet
It would be really cool if yall would test the Ingersoll rand. I believe it model W7152
That thing is a beast in reverse
Hey Torque Test Channel, the BL4040F with the Tabless batteries was released recently overseas and id love to see this revisited with the new battery. Ive heard it offers alot more power and cooler runtime. Also, im curious what this would do with the monster 8.0 battery.
Milwaukee 3/4" Impact hits a lot harder with the 12 amp hour battery. Can you re-do the test with makitas largest battery to suit their new 3/4" Gun vs milwaukee 3/4" with a 12ah battery. When your moving in to the 3/4" and 1" range a 5ah battery isnt what we would use at work.
Just looked at the 1/2 makita today it was 600 for the combo pack at my local hardware store I felt like that was a good deal I will be putting this on my want list I have used the makita impact driver to build homes and I was impressed by them being a dwalt fan all my life I may be switching soon not a fan of mill battery set up if they fixed that and it did not lose connection all the time I would go red but for that I won't have any red tools in my box anytime soon
I build peri and Doka self climbing core forms for skyscrapers and Makita is always the number one way to go. not only are they better, but they are also stronger. doing construction there are mishaps that happen and a tool drops 20+ feet, gets left out in the rain, and constantly gets thrown around in general. Makita has been the only company that has stood the test of time. have had brand new Milwaukee's break a week later, snap in half, and have the handle literally explode apart under torque. Almost every single Makita I started out with are still alive n kicking. Company has a tool room, guess which tools are constantly getting replaced/sent for repairs? Milwaukee and dewalt tools after their first jobsite appearance.
Even the 18v Makitas beat out the Milks just based on their feature set. The variable programming on their impacts is fantastic.
@chasewebber4316
2 жыл бұрын
The Milwaukee is variable too
@reaperreaper5098
Жыл бұрын
@@chasewebber4316 He's either talking about assist modes or the progammable quick button above the trigger. If we're not comparing the One Key versions, most Milwaukee tools only have 4 modes, whereas the XDT16 has 8 and the GDT01 has 10. And as far as variable triggers go, Milwaukee's is enough to get most jobs done, but Makita's is better.
I'd like to see some of the Kobalt xtr impacts tested.
When are you guys going to test the Kobalt XTR 1/2" drive impact?
Do you guys have any plans to test corded impact wrenches? I'd love to see where they rank. Real Tool Reviews did a Kobalt vs Harbor Freight a few years back on a dyno and rated the Kobalt around 640ft.lbs. The marketing numbers for corded are all over the place and it'd be nice to get clear answers.
Lets see more 3/4 drive! Lots of cool guns. Dewalt, air cat, IR Pneumatic and cordless. Plz!
Ok, gonna hold off on purchasing and wait for next Gen Milwaukee 1/2"-dr (or 3/4"-dr) Impact Wrench and see if it can surpass the competition.
Great video
If possible I would like to see the cheaper 3/4" HF pneumatic impact boasting 1000 ft lbs. It's a $150 entry to the 3/4 world and they just sent a new 20% off coupon I think would work towards it. Anyway, as always, thanks for the quality comparisons.
Shit now I really really want this impact even though I have absolutely ZERO use for it. Didn't expect to see a the XGT so quickly after you announced it. Also I just bought a shirt. Keep the videos coming. Any plans on testing different 40V batteries on that XGT impact sometime? Would definitely be interesting to see how the 5Ah with its 20 18650s stacks up to the 2.5Ah!
@TorqueTestChannel
3 жыл бұрын
Hey thanks! We can do different batteries and different XGT tools for sure
Awsome review! Can you please bring on the Dewalt on against this 40v Makita?🤔
Could you make a video on a DeWalt Xtreme Sub compact 12volt 3/8 impact torque test.
You always know Makita have built a tough tool when the screws marrying the clamshell and nose together are threaded into the metal of the nose. Probably a squirt of loctite in there as well.
Not a Makita fan but their R&D department knocked it out the park. Those stats are gonna be hard to top. Milwaukee R&D back to the drawing board.
If majors makes a good 1/2 and 3/8 impact that’s strong and compact I’ll sell all my Milwaukee stuff to get it and I love Milwaukee but making has found a way to make a ton of power and keep the tool compact which is what I need
DeWalt needs to upgrade there mid-torque & high torque impact wrenches as soon as possible I need more power especially since I have to watch guys with milwaukee impact wrenches remove lugs way faster than me. Come on DeWalt it has been almost 7 years since you have updated your impact wrench!
Perfect for ikea cabinet
Now I'd love to see the 1" milwaukee Model # 2868-20
What brand of impact sockets are you using for this test? Just curious!
Can u do the makita 3/4" with higher capacity batteries
initial duty cycle is all well and good, but what about overtime use? is it going to break down faster?
Hi guys, i've bought one of these and i have a question you might be able to answer. Is this wrench suitable for tightening lugs using torque sticks + the cut out modes of the wrench? or how much torque does it make with these modes?
I wish yall would test the makita XWT16z!