Just FYI for safety, you really should use the push stick on the side of the wood against the fence. That piece can fly back and hit you if you don't. You can see in the video that it did start to fly back.

@treydawg8

7 ай бұрын

Also you shouldn’t keep your fingers that close to the blade because if it does get kickback or bind up it can pull your fingers into the blade. There’s many sawstop videos of it happening on KZread.

Thx Matt! Great video, helps a lot while unpacking.

Thanks for the review nice job. Love the saw! 🤓🤓

Looks like a Nice little Tool 👍

This video clearly illustrates how NOt to use a table saw . he is using the push stick on the wrong side of the blade . this is one of the most dangerous things you can do on a table saw . it's amazing the cut piece between the blade and the fence did not kick back .

@cyrillllll

3 ай бұрын

Thank you for the reminder!

@pete_lind

2 ай бұрын

He has blade guard and riving knife on place , those prevent most accidents , yeah the piece between side guide and blade can still fly off . Also it was short piece of lumber , usually you use table saw first, for long material and then miter saw . First job is to make some push aides from 2 by 4 or plywood and forget that plastic stick , its Makita so it is likely that its not the type that explodes when hitting blade.

Bosch had one of these too. Cool idea but only for projects that are small, flooring, trim, etc.

@pawekowalik7826

6 ай бұрын

yes just for finishing

I was looking for this hybrid tool years ago

good demonstration

Your left hand should NEVER be up to or past the blade. Your left hand should be held back before the blade. PERIOD! Your push stick should NEVER be pushing on the waste side of the cut. Never! Period!

@borjasudo5729

3 ай бұрын

Are you on your.... Period!?

Thanks for the video, but I have a question where can I buy this saw?

I don't think any manufacturers sell these combo saws in the US and I don't know why. I think they are pretty cool. Of course, we're all so spoiled that we would need a cordless, brushless, wireless dust-extractor switching model. Why not? Thanks for the demo and good luck with the channel!

@davidcorliss

Жыл бұрын

Virutex does

@Realism91

Жыл бұрын

Another thing that annoys me is they often don't have a option for dust collection in circular saws in North America, but usually do everywhere else with the same brand.

Guys, I love this machine, but have no idea why, both my laser and light are not working. Any idea? From another tools, I got even dedicated AA batteries for laser, but cannot find any on this. Any ideas?

good tool for flooring jobs

I like to see it cut a sheet of plywood and how big is the blade 12 inch? I'd prefer a sliding saw .

Thanks for the video. One thing I cannot figure out is if it’s possible to use the table saw function for bevelled edge cuts? I need to cut some long planks to box in some pipes.

@ryandury

Жыл бұрын

I don't see any connections that would tilt the blade and not the work surface. I also don't see enough clearance on the surface, around the blade to suggest that it can tilt.

@24revealer

Жыл бұрын

I'd get a track saw.

What are the rubber gloves for, did he just come from giving cavity searches?

@BrokenCurtain

2 ай бұрын

The gloves are there to make sure the hand gets pulled into the blade once one of the teeth gets hooked on the rubber.

4:18 hi! Great videos! When i lean the blade to 45' actualy is going to 43 max,do you now how to adjust it? Thanks

Does it slide?

So cool! I wish the table was a bit more robust and had some slots for a sled and a little larger.

Is it good for cutting metal abrasive wheel

Nice one, thanks

Where can I buy it?

Hi! Love the review! Question: in the description on the Makita website it says: remember to change the blade when switching saw-mode. You don’t seem to do that in the video, or do you?

@briankleinschmidt3664

Жыл бұрын

That was my thought. I think he used the wrong blade when he ripped those 2x4's. No trouble cutting across the grain, though.

@p-rt-l2792

Жыл бұрын

@@briankleinschmidt3664 exactly, but would I have to buy a second blade or not? To me that would be pretty much a dealbreaker. I have no interest in switching blades all the time. It would kind of kill the whole dual mode saw thing for me.

@TwanTimmermans-nm5lj

8 ай бұрын

@@p-rt-l2792i dont think you need to switch blades if you want to use the table saw for like 5 minutes

@MrDiabeeto

7 ай бұрын

The blade is fine lol. It may not be optimal but it’s perfectly fine. Never in my life have I changed a blade on my circular saw just for ripping and I probably wouldn’t do it with this either.

I have never seen anything like this. I cannot decide if it is brilliant or stupid. Seems like either way it would be dangerous.

@Chris-dd5wl

Жыл бұрын

Sold.🤠

@bigboundsy

Жыл бұрын

Looks like a gimmick to me

Whats with the rubbaaa gloves??

bonjour , comment change ton la lame ?

If this was available in 40v I'd buy it right now.

@jpl0713

Жыл бұрын

Ditto

What kind of base frame do you use?

@mattssheddythings4517

6 ай бұрын

Just an unbranded mitre saw table that cost around £50 in the UK. What I did do after the video though was shorten the legs by about 100mm to make it a bit easier in table mode.

Didn't know this tool existed

Want!

Great video though!!!

How much this machine

@mattssheddythings4517

Жыл бұрын

UK price is around £430 (October 2022)

@felixmotanul5242

Жыл бұрын

@@mattssheddythings4517 You have hard life in the Uk. To me cost 350 Euro, yesterday I bought it.

Сколько стоит в долларах???

Yeah that thing looks dangerous. You are going to get a piece shot back at you because it binds at the fence

that guard is so dangerous! weird!

If ya need BOTH a table saw and miter saw GOOD idea takes up LESS Space for The home Boy builders out there,lol

ShopSmith 2.0

Great video footage, sadly this is just not for me, looks way above dangerous for my liking.. Stick to a machine for one purpose 1 table saw and an additional sliding mitre saw, tread with caution with this all in one machine!

I think that BOSCH GTM 12JL table saw is better and safer.

@FunTir

4 ай бұрын

No. Makita version is better.

Wow as a 35yr carpenter I am not impressed. Good video work but the tool will be problematic at best. These hybrid tools just dont cut it for the most part. I see a real dangerous combo there for anyone just getting into woodworking and would steer clear of this one. Learn the craft on dedicated tools would be my advice, your hands will thank you

@adgieem1

Жыл бұрын

Great point. It’s more of a toy than a tool.

@inkognitou6982

Жыл бұрын

Looks more like a marketing invention.

@balazsbanhalmi

2 ай бұрын

Why would it be dangerous?

危なくて見てられない

Naaaaa not a fan I've got a miter saw and table saw for work might have a different opinion if I used one don't know anyone who has one.

@davidrobert1855

Жыл бұрын

Ideal for diy work and some one that as limited space i thought

I like it it work Very good

Dangerous

Well… no

I don't like it because it don't look safe

Not sold in us. Too stupid to use

As a contractor for the last 20 years I would never buy this new stupid tool for my jobs possible for my house but not for projects, I rather have my d setup of tools mitter saw and table saw separately at the high and angle that I need it each one and not adjusting it a for every phase of the materials... Good luck 👍 with this tool

Please learn how to securely use it, you will loose a finger someday

Copying Bosch. They did it first, still not impressed

@felixmotanul5242

Жыл бұрын

@sergio rives Virutex is cousin with Bosch, if you did not know.

@felixmotanul5242

Жыл бұрын

@sergio rives It was just a joke, what did you light up like that?

This machine looks like a mess.

I can't watch, looks like it's dangerous and won't do either job very well...

Take my advice or not but please don't wear gloves running a table saw. I've seen it happen twice.

The worst product of Makita.... I have and I am very disapointed!

Personally, I would rather want Makita to design and make their own separate table saw.

@FixthisCD

Жыл бұрын

they already had one, model 2705, guess it didn't sell well????

@FixthisCD

Жыл бұрын

sure they will do a 40v version sometime