Makita 40v 216mm Mitre Saw | Is The NEW MAKITA LS002G Mitre Saw Better Than The DLS111? FULL REVIEW
Тәжірибелік нұсқаулар және стиль
You asked for it, you got it! Let's take a look at the NEW MAKITA XGT 216mm Mitre Saw, or the Makita 40v Max 8 1/2" Miter saw if you live in the inches country. Is this the best cordless sliding compound mitre saw?
Makita 40v Max XGT GSL02 or LS002G UK amzn.to/3kMcBrs
GRAB ONE NZ shop.handyhardware.co.nz/maki...
My Other Channel / buildsstuff (Think of it like Instagram... kinda)
& I'm on actual Instagram now too / toolsandstuff
MAKITA 40V IN THE US!!! ► amzn.to/3tszyAP
►►►Handy Hardware www.handywarehouse.co.nz/ 1/79 Wairau Rd Auckland
►►Get some 40v tools in the UK & Europe amzn.to/3306Htf
►Worldwide ebay.us/SIMFJs
More Makita XGT 40v Videos
40v MITRE SAW • Makita 40v 216mm Mitre...
40V BRAD NAILER • Makita 40v Brad Nailer...
40v 125mm CIRCULAR SAW • Makita 40v 125mm Circu...
40V 165mm CIRCULAR SAW • Makita 40v 165mm Circu...
40V 185mm CIRCULAR SAW • Makita 40v Circular Sa...
40V 260mm REAR HANDLE CIRCULAR SAW • Makita 40v 260mm Circu...
40V ALL DRILLS COMPARED • Makita 40v Drill Revie...
40V IMPACT WRENCH • Makita 40v Impact Wren...
40V IMPACT DRIVER • Makita 40v Impact Driv...
40V ROTARY HAMMER DRILL • Makita 40v Rotary Hamm...
40V RECIPROCATING SAW (SAWZALL) • Makita 40v Reciprocati...
40V COMBI DRILL (HAMMER DRILL) • Makita 40v Hammer Dril...
40V GRINDER REVIEW • Makita 40v grinder Vs ...
40V CHARGER & BATTERIES • Makita 40v Batteries a...
40V CIRCULAR SAW • Makita 40v Circular Sa...
40V DRILL CLUTCH SETTINGS • Makita 40v Hammer Dril...
40V RADIO • Makita XGT 40v Radio |...
MORE VIDS
My Top 5 18v Makita • My TOP 5 Makita 18v Co...
My Top 5 36v (18v x2) Makita • My TOP 5 Makita 36v Co...
Homemade Hot Tub • How to Build a Hot Tub...
MY AMAZON STORE www.amazon.com/shop/toolsstuff
ToolsContactNZ@Gmail.com
If this description contains links to Amazon, as an Amazon Associate I may earn from qualifying purchases. This doesn't cost you a thing! But it means I can make more videos for you.
Check out my other videos for reviews of Makita, Hilti, DeWalt, Bosch, Hitachi, Ryobi and more... As well as build projects and the odd random thing.
#XGT
#Makita40v
#ToolsandStuff
#BuildsandStuff
#KiwiToolReviews
New Zealand
Пікірлер: 267
MAKITA 40V IN THE US!!! ► amzn.to/3tszyAP
@MaybOnAGoodDay
2 жыл бұрын
But I want the LS002G :(
@ToolsAndStuffOFFICIAL
2 жыл бұрын
Where do you live?
@MaybOnAGoodDay
2 жыл бұрын
@@ToolsAndStuffOFFICIAL the US!
@ToolsAndStuffOFFICIAL
2 жыл бұрын
It's available in the US but it's called the GSL02
@arkeyarkey9489
Жыл бұрын
How ya going mate great video quick question would this saw be good for fine cuts for kickers in kitchens?
This saw was my gateway to the 40volt. Best saw I've owned, easy to take it up on the scaffold to do the trim for cladding.
@frenchyroastify
Жыл бұрын
I agree. So easy to move around one handed and not having to worry about power supply. I recently had to move my old Makita 10 inch corded saw at home; what a beast!
Had this saw for a couple of months now and have to admit it's the best mitre saw i've ever had well done Makita
@TheOMEGANOX
2 жыл бұрын
Good to know, just ordered.
@jpramos5959
2 жыл бұрын
Just ordered one haha
@Boxingfanatic-fb8zg
7 ай бұрын
How's saw now
@Boxingfanatic-fb8zg
7 ай бұрын
@@TheOMEGANOX how's the saw..
@mickwebber4345
7 ай бұрын
@@Boxingfanatic-fb8zgStill fantastic a truly magnificent mitre saw. Well worth the £££££
I can't believe i didn't leave a comment on this video ! This is the best video for this saw that i've seen and is the reason i bought my own a couple of months ago and am so happy with it , thank you 👍 I made my own short video because the one thing we use a lot of at times is 95mm MDF skirting and having had the 305mm LS1214L i've always cut the skirting upright and wanted to do the same with this saw , there were no videos out there of 95mm x 18mm being cut up right so there is now . Again thanks for another great video 👌
This is the best saw I’ve ever owned, it’s beautifully designed, I’m constantly amazed at the quality of finish cut I get from the factory blade, and I bought this saw with confidence because of your review! Thank you!
@ToolsAndStuffOFFICIAL
2 жыл бұрын
Glad you like it.
I’ve used this saw for two days, I’ve been fitting a flat roof, cutting 47x170 timbres all day. No battery change. The best part is how buttery smooth the cuts are. Almost feels weird how smooth it is. I actually want to marry it.
@markhedquist9597
3 жыл бұрын
I don't think anyone who watches this channel would think you are weird for wanting to marry your saw.
@youiyoui9942
Жыл бұрын
This comment made me buy the saw
@davidatkins1211
Жыл бұрын
What size battery?
@Boxingfanatic-fb8zg
7 ай бұрын
How's your saw going..
@Boxingfanatic-fb8zg
7 ай бұрын
@youiyoui9942 did you buy if so how's it going..
Had mine a couple weeks now and really love it. It has everything you would want in a mitre saw and some. Well done Makita
@TonyMalony834
2 жыл бұрын
How's the dust collection with it? Do you use a vacuum?
@tr0g98
2 жыл бұрын
@@TonyMalony834 its fucking amazing, one of my mates who cuts a shit load of mdf hardly sweeps up of course its not 100% but its dam close
Thanks 😎. This looks like Makitas answer to Hikoki’s mega priced 216 saw - the fit and finish look very good. Well it’s light enough for me to carry, looks well built and accurate and has enough power to do the job - I best get saving...
That was pretty damn impressive for a first cut out of the box. I’m just getting into the XGT line slowly 😂. I’ve had the 7 1/4 rear handle forever and just recently got another 10 1/4 rear handle. I had one before but my generosity made me part with it and had to get another. Picked up the XGT impact driver and hammer drill kit a couple weeks ago so it’s a start. Definitely was looking into this chopsaw for the jobsite. My dad scares the hell out of me with a circular saw. Almost cut his fingers off twice so I’m wanting to get him a miter where he can just lay the lumber and drop the saw in the cut. He’s getting older and careless about safety😂. Been a huge fan of the channel for quite a while brother. Thank you for buying all these tools at your own expense to make these videos for us to enjoy and learn from. Makita is a solid brand and the XGT line is amazing. Take care my friend
Bit pissed off that this was a such great review as I want it now
@TakamiWoodshop
3 жыл бұрын
same
@Otterlimits
3 жыл бұрын
Yes. This channel is the worst because he's the best!
@ToolsAndStuffOFFICIAL
3 жыл бұрын
So these are compliments... right?
@majl1000
3 жыл бұрын
@@ToolsAndStuffOFFICIAL most definitely, you have a great passion, and style, the way you review stuff is the way I look at tools when buying(I am a carpenter) you show all points . Plus very entertaining. Keep up the good work my friend
@joakimborgstrom710
3 жыл бұрын
I feel ya... Cause I went and got one... xD
OK, now you've done it! I wasn't really considering changing to the 40v platform but now I've gotta' sit and have a think (and that's gonna' hurt!). Fortunately, I'm in the States so I have to wait --otherwise I prolly would have already gone out and bought one! Lol Great/fun review --thanks!
Wow. That is a nice friggin saw. I do believe I will buy that when it comes to the US. That will be the first 40v I will get. Excellent job of reviewing it. Thanks!
@ericmann1781
3 жыл бұрын
Same, I've been waiting for this to release, hoping for the led line instead of the laser on the 2x18 model. Only negative for me is the extra 7lbs since my use is 100% carrying it around, but considering the improvements, I still seriously like this saw.
@frenchyroastify
Жыл бұрын
It won't be your last. I love the XGT line.
Superb! Awesome looking machine! Makita rules! Vertical handle makes for more accuracy when pushing through a cut! Thanks for your patience, ha ha. Enjoy it! Cheers Mate! 👍👍👍👍👍👍👍👏🏻👏🏻👏🏻👏🏻😁✌🏻😀🥇
In regards to the dust extraction, and this is if it sits in a shop all day, I’ve seen some dust extraction boxes made up that will suck up the vast majority of the dust. Helps a lot when cutting mdf and melemine and treated products
I've got two flexvolt mitre saws but I'm still feeling the need to purchase this beauty. 👍😃
@agent7agent759
Жыл бұрын
Had the flexvolt, burnt on me in about 8 months, go with makita 40v 12" it's a superior saw and quality is there , I tried milwaukee which is garbage the dewalt are better than the milwaukee, but Makita is step up
Great review, very informative
Great review. It convinced me to buy one! Thank you
Thanks so much for all your amazing reviews. I was wondering how loud this tool is? Is it about the same as the 36v mitre saws? Thanks again.
Great Review like always. 👍👍
@ToolsAndStuffOFFICIAL
3 жыл бұрын
Cheers man
Beast that pure quality love makita that's the daddy of cordless saws I reckon makita always innovate/ slowly but surely lol redesign improvements and adjust thier products engineered to suit the end user requirements in ie construction joinery electrical other professional trades 😁👍or just the general consumer that wants professional quality tools
Thanks for video, my next tool. Cheers
Thank you for taking the time to make this video! Can you please do a comparison between the Metabo 36v Miter Saw vs the Makita 40v... thank you 😊
@travisjazzbo3490
3 жыл бұрын
It's a 40v max... which means, like Dewalt, it is really 36v... Regardless, it's a Makita so it will be awesome and last a long time!
such a nice tool, and so compact, lightweight. might be nice if they could also bring back the laser at the same time as keeping the shadow line. to cover widest possible range of different lighting conditions. well it doesnt matter to me i guess! as i dont need a mitre saw. good tool to get for 40v platform though. the quality of it really so well built
@Tools & Stuff. Thank you for the very thorough review of the Makita DLS111 cordless compound miter saw. It's great Makita listened to you and other owners of the X2 version and made the 40V MAX version better. As you keep using DLS111 please keep us updated on any problems or suggestions we can expect. Hope you and your family stay safe and well.
Can you post a video showing how to make the planter box. I want to make the same one as you.
I've been kicking myself for not getting the 10" 36v when they had it on sale for 512usd with 4 batteries. but after using the company one and seeing the improvements on this one I can't wait until they release the 40v here.
@spilleradam
3 жыл бұрын
Or you could wait until they bring a 10 inch XGT out, you know it’s only a matter of time, it might be a 80 volt two batteries, that will be good..
Looks count for my enjoyment of a tool and that darker metal is sweet looking. Holy shoot! The shadow line like my DeWalt. I want the corded Makita saw for the rail to wal space saving. Maybe an updated version by the time my DeWalt is wearing out. Also did you know a random carpenter KZreadr sells angle plates made out of heavier metal? He started selling years ago but it’s in US and he has to have 50-100 or some number of orders to have a batch made. May have to wait but it’s awesome he made them. Name is Stene Woodwork here on the Tubes.
#Tools&Stuff this is an awesome vid, Just bought this tool last week...
Just bought one tonight in Canada, have a minty 03 that someone never used off zero LS 1013 which replaced my first LS 1013 I bought in 2001 and the stand, a 714 too my fav saw, but the detentes are getting loose after 5 years, I'm old 68, been doing carpentry for a living for over 30 years, hoping this saw is magic so I can continue to do my magic!
Great review, thanks
Yes, it looks good, the XGT tools are so expensive though, well most cordless tools are expensive, I’ve still got a Makita LS 1013 corded mitre saw, it’s served me well.
@markhedquist9597
3 жыл бұрын
I'm still running an old LS 1030 myself, and still love it. But this XGT bad boy looks like the one that'll steal my love.
@spilleradam
3 жыл бұрын
@@markhedquist9597 yes the XGT mitre saw looks good, it’s expensive though they’ll probably bring a 10 inch model out soon, maybe an 80 volt two 40 volt batteries I think the XGT tools will be better than Dewalt’s flexvolt .
About rpm. I believe tool companies mark their tools with max rpm readings which are not taken without load. First they put the tool under load and in the moment the load disappears tool gets some boost before electronics could stabilize rpm. Same thing as 40v max actually is 36v :)
Picked this up last week after looking at options for a small but feature-rich saw. Nice out of the box. The shadow line is useless. Every other element of the saw is spot on!
@neilcopeland4411
2 жыл бұрын
This saw was never advertised to have a shadow line, its just a work light, dewalt has the patent for shadowline so i don't know where you seen where it says it has a shadow line, who ever said it has this feature is talking bo--ocks and if anybody on utube said it has is wrong too, as this guy, its just a work light, this guys full of shite
@ToolsAndStuffOFFICIAL
2 жыл бұрын
Pull your head out of your arse mate. All new Makita 40v mitre saws have shadow lines.
Very good review!
I'm really tempted to buy this saw, just wondering how long the batteries last under typical use like 2nd fixing a large house, not always got power in the house when on 2nd fix
You make a great informative video, plus your audio was loud and very understandable. That is a great saw, I've owned several makita miter saws in the past. I purchased makitas first battery miter saw years ago it had a 7 inch blade. Great little saw for shoe molding etc. But did not have enough power and RPMS. Looking to get this one, wanted the Milwaukee miter saw but to many complaints.
Mate. Makita should be really looking after you!! You've saved them a fortune in advertising. Awesome bit of kit there. Great to see makita are making good improvements. #lovemakita #toolsandstuffnumber1
@ToolsAndStuffOFFICIAL
3 жыл бұрын
I have certainly helped sell a lot of stuff for them judging by all the comments I get from people who have watched my vids. #OneDay...
@brettwalkom948
2 жыл бұрын
How come Scott Brown gets given a bunch of stuff but poor old mate misses out
Great review thanks
Omg 8:59 they have to fix the locked away position to make it tighter instead of the 3mm movement banging around. been listening to my 36v bang around in the back of my van for years drives me nuts. love the pin idea. i usually jam a rag in it
Looking forward to additional feedback on accuracy for trim work. These small saws should (in theory) be great for the occasional trim repair, but for larger trim they rely on both the bevel and slide functions. Both if those (bevel and slide can introduce additional accuracy challenges (i.e. non-parallel blades affect the slide and bevel cuts are more susceptible to blade deflection, etc.). In short, a much cheaper saw can cut 2X material "good enough" so, for me, the real question is "can it handle big trim beveled on the flat and produce tight joints ?"
@TonyMalony834
2 жыл бұрын
I've just ordered one, I'm putting my money on it replacing my 10" bosch glide saw. I install trim and cabinets and very very rarely cut anything close the max on this saw. I hope it works
@TheOMEGANOX
2 жыл бұрын
@@TonyMalony834 how is it working out? Just ordered the 12”
I waited and waited and waited before buying the 36 volt saw because of the price and just how big it was. But my trusty old small and light Ryobi was just feeling its age and Home Depot had a great deal on a kit so I pulled the trigger and bought it. And then literally 2 weeks later this XGT saw was announced and it is the perfect setup. Of course it's a lot more expensive and I can't get it in the states yet. But I sure want it even thought he 36v saw is great (except the laser).
@ToolsAndStuffOFFICIAL
3 жыл бұрын
This saw is available in some parts of the states. But you may want to hold off until you have seen the reviews of the 10" and 12" XGTs which are already out in some parts of the world. Reviews here soon hopefully...
I really hope these features get added to the 12" miter saw, whenever the 40V hits the States. They addressed all the issues holding me back from buying the LS1219L. Steel detent plate, sliding fence, shadowline LED, front bevel adjust knob, rail alignment fixed... Makita, pls
@jimmymac601
3 жыл бұрын
Same here. Will absolutely get rid of my Ridgid corded 12 inch for it.
@histguy101
Жыл бұрын
The 12" XGT is nice, but is in the Festool price range
@ToolsAndStuffOFFICIAL
Жыл бұрын
Much cheaper than Festool here.
@histguy101
Жыл бұрын
@@ToolsAndStuffOFFICIAL over here the GSL04M1 w/4ah battery & charger retails $1399.00 usd, and the corded KS120 retails $1575.00. (Acme tools, Home Depot, etc) There's actually only one store in my vicinity that even stocks any XGT, and they charge even more. All the hardware chains and big box stores only carry LXT in stock.
@ToolsAndStuffOFFICIAL
Жыл бұрын
@@histguy101 And you're comparing it to a corded tool.
nice review!
Great News! Handy Hardware have just contacted me with a special price for this saw LS002G. $1098 for the skin and $1498 for the kit! That's $150 cheaper than I have seen it elsewhere! Just say you saw the price on this review. orders@handyhardware.co.nz or in store 1/79 Wairau Rd Auckland. All prices are in New Zealand Dollars. Check them out and maybe we will get some more deals and tools to review. Thanks for watching!
@majl1000
3 жыл бұрын
£580 for bare tool in UK
@fanaticz666
3 жыл бұрын
Hey mate great stuff i'm really keen on this saw after your review. I'm also from Nz, do you know what comes in the kit version for this model?
Unlike the older model you showed in this video does the new 40v one have the groove so your able to mitre say 4 to 5 inch skirting in the upright position
I had to calibrate mine. Quarter of a degree on base an 1 degree on vertical. Apart from that it’s a good saw!
@timtrillwood5768
9 ай бұрын
I'm anal about that too!
Did you ever work with a Kapex? Can you compare blade deflection?
That is a sexy saw. Awesome review too. The attention to detail is first class. 👌🏻
@ToolsAndStuffOFFICIAL
Жыл бұрын
Thanks. Much appreciated.
XGT 40V just launched in the U.S.A. today...but the miter saw is not part of the initial launch (just "coming soon" unfortunately). It will be interesting to see if folks are willing to jump to the Makita 40V instead of the "one battery" that works on everything with Milwaukee (high amp batts) and Dewalt (Flexvolts fir on regular 20v max tools). Makita seems to try to compete on the features and quality of their tools (like this one)...not sure it will be enough.
I wish they had this as a 18vx2 when I bought the 190mm dropy (don't no the item number) I just waiting for a half decent reason to start buying 40v as there is not alot of 18v makita tools I don't own.
This saw is so dreamy I’m so keen to see the what more the xgt range has to offer
@ToolsAndStuffOFFICIAL
3 жыл бұрын
Have you watched the other 6 xgt tools I've reviewed? 😉
@slimeslime2123
3 жыл бұрын
I have mate your videos are addicting
Another awesome review, knew I wouldn't be disappointed in the 40v 216mm Mitre Saw. Any dates for the 260mm or 305mm 40v?
@ToolsAndStuffOFFICIAL
3 жыл бұрын
Not yet...
When do you think they will update the 36v to this new featureset (led, better side supports, better ux)? This is so good, better than the Festool, just don't want another battery platform... Happy with the 18v
Does it come with a stand ? If not what one is compatible ?
Is it possible to get blade light to come on when you press trigger
I'm still waiting for makita to release the 165mm 18v saw which is like this but smaller. Might have to order from Japan.
I was wondering , have you ever done videos on Nikita table saw. And what do you think about it? And the details of it
Comparison vid with the hikoki 36v 185mm miter saw?
I was going to buy the big 12" version and after watching this I will now buy this model. It made me realise the 12" is probably too much saw for me. I hope the Australian version is the same as the NZ version. Thanks.
@ToolsAndStuffOFFICIAL
Жыл бұрын
They are the same.
@Tools & Stuff Any recommendations on mitre saw stand? Would always be transported around. Would like to go Makita but if have a better recommendations that would be great. Enjoy 🤘
@ToolsAndStuffOFFICIAL
3 жыл бұрын
That's something I've never done a comparison on. So I don't know which one is the best I'm afraid.
The handle suits left and right handers as well as the double bevel
Can you fit a 235mm bladein there?
is there spots for crown mold stops
Great video thank you. I'm sold, gonna make my order. Can you (or anyone) share the height of the base to the table top ? I want to check if i need to make a new table to fit this in so the rest of my table willsupport the material when it's placed on the table bed. I can't seem to find the information anywhere. Appreciate your time.
good afternoon will this saw cut vertically 40x80? 35x80? Will she cut a 40x80 beam while lying with her head piled under 45?
Is there an adapter that can hook this up to AC power? This will mostly live on my bench with the odd time I would need only battery power. Thank you!
@ToolsAndStuffOFFICIAL
2 жыл бұрын
No.
I’ve had some issues of the saw kicking back quite frequently when pushing through cuts. Does anyone know why? Is this happening to anyone else?
@MaamyyraGaming
3 жыл бұрын
If i understood correctly, your issue is that the wood you are trying to cut has slight bend in it. When you are cutting, you are creating relief cut. Since you push the blade, the wood wants to "fold" towards the blade gripping it to a halt. The wider the material is, the bigger issues you have.
Anyone know what the nested crown capacity is?
Today I tried to buy this saw .In Australia it’s currently sold out and pre orders are expected February 2022.
@ToolsAndStuffOFFICIAL
2 жыл бұрын
I can send you one from here... shipping might be a bit steep though...
Can’t wait to get this in Australia. Hurry up Makita.
@ToolsAndStuffOFFICIAL
2 жыл бұрын
Haven't you guys got this yet? It's been out here for nearly a year.
@jackfourbee3609
2 жыл бұрын
@@ToolsAndStuffOFFICIAL Not yet and Makita haven’t got a date yet. Can you cut 140 x 18 on edge with it.
What is the height of the base to the table?
At first sight, I said WOW. Under your lighting, it looked like gunmetal, not the normal raw metal look. Great review. The bevel cuts on 12x2 timber was a taxing on the 2.5Ah, I didn't hear you say that with the 4Ah. Also, it seemed you were comparing the size of a 12 inch miter, with an 8.5 inch. Of course the 8.5 is going to be smaller. Great video, and I am in the market for a Makita miter saw, but I was leaning towards the plug in type.... Not sure if I'll be moving it much.
Can you fit a 235mm blade on it?
Yeah that twin 18v one looks rubbish...... I'll get rid of it for you. You don't mind posting it to the UK do you?
@mattkaplan1316
3 жыл бұрын
Go to Melbourne Australia it’s closer
anybody know if this is coming to the USA?
Damn that thing doesn't slow down at all on those bevel cuts.
Have you tried out the 260mm version? I predominantly frame so not being able to cut 90x35 on edge is a bit of a deal-breaker.
@andy2231
Жыл бұрын
Why not lay it flat?
@lamdog24
Жыл бұрын
@@andy2231 can't cut studs as quickly or use props to cut large quantities quickly.
Trying to order one here in the US. Sadly it’s not available. I have the Makita 10” saw but after back fusion and two knee surgeries… I’ve got to cut weight of of my tools. I wish Mikita would make this same saw with a 10” blade, keep the same size frame, rails etc. Just go to the larger blade and adjust the head to accommodate. I’m a big fan of the shadow light. I have it on a couple of other saws we have, a Dewalt and Milwaukee. The Milwaukee will work in all but direct sunlight. I’ve found all I have to do is put the saw in the shade. Thanks for the great review.
@ToolsAndStuffOFFICIAL
3 жыл бұрын
The 40v 12" is not far away. I will try and find out how heavy it is. I have seen pics and it looks smaller than the 10" lxt.
@ToolsAndStuffOFFICIAL
3 жыл бұрын
Wow, it's super heavy! 30kg (66 lbs)
@bret9741
3 жыл бұрын
I was looking on the Mikita web site. It says 48.52 shipping lbs. my 10” Makita is 57.9 lbs. I’m going to guess. If the 48.52 shipping lbs is correct then the box, packaging add up to about 5 lbs. So the unit with batteries is probably 45 lbs. but all this is a guess. If your correct on weight. Then it’s heavier than the larger 10”.
@ToolsAndStuffOFFICIAL
3 жыл бұрын
I'm talking about the new LS003G 12''
@bret9741
3 жыл бұрын
@@ToolsAndStuffOFFICIALyep…. Sorry. That’s not too bad for a 12”
How do you adjust the rails. Mines cutting into the plastic when pulled right out on a left mitre.???
@ToolsAndStuffOFFICIAL
Жыл бұрын
Have you adjusted the kerf plates.
@seendizle
Жыл бұрын
@@ToolsAndStuffOFFICIAL is that the plate with the stop indents on it??
@ToolsAndStuffOFFICIAL
Жыл бұрын
No dude. Send me a quick vid to my email or Instagram showing what exactly the problem is because I'm not sure we're on the same page. If I can't sort it I'll give you the email of someone who can.
I have a question I can’t get this saw square I put a square against the fence and then put it against the blade when it’s square I tightened the screws but then I if I want to cut the full length of the saw it’s like 2/3mm out I can’t figure it out maybe There is something wrong with the blade or something
@luchollaar9025
4 ай бұрын
Or iam scared it’s the bars but they look straight to me
@luchollaar9025
4 ай бұрын
Well I think I know what’s going on probably the saw is not sqaure to the bars iam going to send it back unfortunately cuz I really like how it works but mine is not accurate not even for framing 😂
The only thing that's bugging me and keeping me from getting it is I'm 99.9% already on flexvolt and 20v max dewalt line. So unless there's some sort of a gizmo adapter that I can 1. Plug it into a socket like the flexvolt miter saw 2. Adapter from makita to dewalt battery... Kinda like I have the Milwaukee nail guns with dewalt batteries. Unfortunately I can't get with having multiple chargers and multiple battery platforms. There's just no sense in it. Also in my opinion. Makita 40v battery line is too large for any of the other tools. It's just too bulky. Kinda like runing flexvolt battery on impact... It's just 2 big. Best solution is to have some adapter that makes it a corded or cordless unit
Darn, why can't Makita just make a 36V LXT version of this saw and a 10" version. Or some kind of double LXT (36V) to XGT (40V) adapter...
Hi mate been looking at this saw online is there any chance the next time you have the saw out an you tell me if it would cut 95mm X 16mm skirting board standing vertical against the fence? I cut my mitre's and scribe's this way saves me laying the saw in the bevel setting thanks and keep the good reviews coming 👌🏻
@tysonfoster7223
3 жыл бұрын
I know it cuts 90 x 18mm
@11711BRANDON
3 жыл бұрын
@@tysonfoster7223 will it do it on 45° aswell?
@tysonfoster7223
3 жыл бұрын
@@11711BRANDON upright? Yea
@11711BRANDON
3 жыл бұрын
@@tysonfoster7223 thanks
Wish they made this style in a 10 incher
Where is the cheapest place to get this saw bare tool in new Zealand
@ToolsAndStuffOFFICIAL
2 жыл бұрын
Take a look at handy hardware.
How deep can it cut 18mm timber standing upright against the fence ?
@B15SDMDESIGNS
2 жыл бұрын
This is what I've been trying to find out for the Makita ls002 and the Festool Kapex KS60e. Can't find this information out anywhere.
@Nilsje
Жыл бұрын
@@B15SDMDESIGNS Me2 :)
Waiting for the corded version. Waiting...... waiting...... waiting......
Some tools do not really need to be dc powered, especially the not so mobile ones like this saw. What's the advantage really? This is more of a workshop piece of equipment- I prefer the corded one.
Hey mate, not sure what that detent plate is, but the 18v x2 detent plate is magnetic as there is a thin piece of steel underneath. I hope this one isn't the same. I've replaced mine with a stainless steel one.
@ToolsAndStuffOFFICIAL
3 жыл бұрын
This one is def not Ali, as soon as I opened the box I looked in and thought "Yes! Stainless mitre gauge!"
@kizzjd9578
3 жыл бұрын
@@ToolsAndStuffOFFICIAL nice, I still want to try order this saw but the 18v 165mm version from japan, do you know how to go about doing so?
@ToolsAndStuffOFFICIAL
3 жыл бұрын
ebay.us/DDUE4R Shipping will be a killer
@ToolsAndStuffOFFICIAL
3 жыл бұрын
Whoops, I just saw you wrote 18v not 40v
@ToolsAndStuffOFFICIAL
3 жыл бұрын
The 18v should be available in Aussie. DLS600
I so badly want this saw.
Detent plate be brushed chromed steel.
@tools & stuff I’m an apprentice carpenter and my company is now putting me in my own truck to be on my own I need a good 12in miter saw but don’t know what one to pick. Any opinion?
@slimeslime2123
3 жыл бұрын
Dewalt 12 inch drop saws are pretty much the go to for most just look up a bunch of KZread reviews on them either corded or cordless
@ToolsAndStuffOFFICIAL
3 жыл бұрын
Do you want a cordless one? If so, the best in my opinion is the Makita DLS211
@jonahmoschowsky3794
3 жыл бұрын
@@ToolsAndStuffOFFICIAL I’m not sure I’ve always used my leads corded but the cordless makita isn’t too much more then the corded, everyone complains bout prices but I want a good one cause you gotta spend money to make it in my opinion.
Send me one, in Colorado. Thanks!
Is the machine come with the battery and charger
@ToolsAndStuffOFFICIAL
2 жыл бұрын
Like most Makita tools you can buy it in a kit with battery and charger or as a bare tool if you already have batteries and a charger.
Is this saw why the Kapex price has gone up?
do they do a 240v in this design?
@ToolsAndStuffOFFICIAL
2 жыл бұрын
Not yet.
Damn, why couldn't they have made the handle horizontal, and added the option for a ac power.... come on makita.... great review man
@spilleradam
3 жыл бұрын
That would be good, ac power as well, but it all adds to the cost
In the states.. getting tired of waiting. May purchase from Japan and pay an insane amount 😂
@bendover1128
3 жыл бұрын
In Reno NV, in a store they already released Xgt models I went today, very surprised.very few stuff just the drills and other stuff They said they were getting more stuff within a few weeks
@josephlowrance3
3 жыл бұрын
@@bendover1128 can finally order here online. Estimated ship date September
Great saw, except you can't cut a standard 4x4 post in one pass. The blade is 1/16 too small.
@ToolsAndStuffOFFICIAL
4 ай бұрын
No saw with a blade this size will.
Are you going to review the 260mm XGT mitersaw, or did I miss it?
@ToolsAndStuffOFFICIAL
2 жыл бұрын
I've got the 305mm... review eventually.
@donderjager4770
2 жыл бұрын
@@ToolsAndStuffOFFICIAL I presume the 305 is more or less the same as the 260
@ToolsAndStuffOFFICIAL
2 жыл бұрын
Pretty much.
@dmcdayton
Жыл бұрын
@@ToolsAndStuffOFFICIAL How are you liking the 305? I'm on fence between 216 and 260 for home use, my research says the 260/305 are basically the prior chassis with stainless indent plate and shadow line. The 305 has more substantial wings than 260 but same format. I'm looking for a Festool killer.