It's definitely nice to see some more people working on equal length exhausts with crossovers on trucks. It sounds 100x better than the unequal length/"true dual" setups that everyone wants on their vehicles.

@NickTheFelice

2 жыл бұрын

Agreed. My truck (profile pic) had true duals and it sounded bad. I reverted to a full 3 inch stainless single, factory exit, long tube, no cats. 1 super10 and 1 TRX muffler as a resonator lol. Good noise under power but I love this guy's corsa setup.

@Thoroughly_Wet

2 жыл бұрын

It's that chug-a-lug that sounds like some old 1970s muscle car. It's what I liked about my c10 before I blew up the 350. Now that it's getting an L83 I plan on going with a similar setup to the OP's video

@Cheesenips111

Жыл бұрын

I don’t understand the difference between what you mean “equal length” vs “true duals”. I just did a nice X pipe setup with corsa mufflers that is symmetrical on both sides on my LS 69 camaro trying to get that vette sound and it sounds like a truck with exhaust.

@austinblevins6804

Жыл бұрын

@@Cheesenips111 he's saying the headers are equal length, and the exhaust had 2 separate mufflers instead of 1

@tjonz849

7 ай бұрын

I hate how these trucks sound everywhere around me they are straight piped and “clap” it’s awful mine will be equal length sounds amazing

Swear on my life this is the best sounding Silverado I’ve ever heard. I was looking for ideas for ‘17 6.2 Sierra, have always loved the Vette sound… the search stops here. Thanks for posting.

I couldn’t tell you how many times I’ve listened to this truck. You’ve out done yourself with this one. Sounds amazing

Been looking around forever for a good sounding ls truck and this is one of the only ones. And you have the full setup, bless up brotha

I don’t have a truck or anything that sounds like this but this is one of the best sounding exhaust notes I ever heard on a pickup or even a corvette. You definitely know your stuff!

@Chase.bachler

2 жыл бұрын

That’s a great compliment man! I appreciate it. Definitely was worth all of the hard work that went into it

@alb12345672

Жыл бұрын

@@Chase.bachler I have a 6.2L F150, the last guy put an expensive Exhaust on it. My neighbor has a new vette, he said he loves to hear my truck start in the morning, he said it may even sound better than the vette :lol:. Truck is a 6.2L BOSS w/411HP. Looks like flowmaster with a true dual and crossover.

@tarriouscarr2503

Жыл бұрын

Do the headers have to be equal length?

@Njderig

Жыл бұрын

@@tarriouscarr2503 I believe so.

Damn this thing sounds SO good! This is definitely going on the list of to-do's for my truck. My motor is really similar all the way down to .030 milled and ported 243 heads. Just a different cam. Awesome work man. Your truck is killer.

Wow great job bro ! Definitely one of the best sounding chevy trucks on KZread ! Think this is the video that finally makes me go true dual from the headers . Right now I have headers into a single borla dumped before the axle .

That sounds amazing def best sounding Silverado I’ve heard

Thanks for showing us the end result first. No one on KZread does this. You da man! Nice sound btw

Looks just like mine that's the sound I want for my truck nice job on the exhaust bro 👌

Dual mufflers is always my go to setup

I did this to my single cab about 7 years ago best sound it’s ever had love your setup man😤🤟🏻

Excellent job on the exhaust!! It sounds totally like a beast!!

@Chase.bachler

2 жыл бұрын

Thanks brother

@jameswebb3932

2 жыл бұрын

@@Chase.bachler Anytime!

Sounds amazing , you did a fantastic job . Cheers

An awesome sounding system !!! Thanks for the info and tips !!

Nice looking & with a good sick sounding exhaust on your chevy truck dude 👍

I picked up a cateye a few months ago. It’s the same color as yours. I have that crapy side exhaust I don’t like it. It’s cut short bc of the leaf spring. I’m definitely going this route. Appreciate the upload. Sounds great!

the first truck to not sound like a truck. nice job sir 👍👍

@Chase.bachler

6 ай бұрын

Thanks 👍

The fact that you mentioned Kenny just goes to show how influential his vid is. I'm looking at doing the spintech 6000 series like Kenny, on my lsx swap g35 coupe but I don't know if I'll even have the space. Great video, thanks for replicating the northern performance exhaust setup!

@hjfcoco

Жыл бұрын

Did you do the spinteck? How do you like it? I'm wondering if if the spinteck sound better than these

Sounds awesome I have a 2012 6.0 and I would love her to sound like this

I bet when people hear the sound they’re like “oh a corvette” then they see this truck and they’re like “wtf it’s that truck right there!!” Sounds great man 🤙

Your truck sounds really good! Today I went to pick up some goodies and I seen your truck! Looks good, loving the build 👌🏼

@Chase.bachler

Жыл бұрын

Thanks brother! I would’ve showed it to you if I known you were there!

@jonathanorona7493

Жыл бұрын

@@Chase.bachler next time I head over I’ll give you the heads up! Plenty of goodies needed for my truck so I’m getting a few things at a time.

@jonathanorona7493

Жыл бұрын

Do you have an Instagram? Had a question for you if you wouldn’t mind?

Best sounding gmt800 truck I’ve heard

@mikeramon4664

2 жыл бұрын

Go to Northern Performances channel he’s got the same setup but with a 408 stroker with 12.7:1 compression sounds fuckin gnarly

@shannonsisk

2 жыл бұрын

@@mikeramon4664 yea I saw that. Ok yours is the 2nd best 😂

This set up sounds great, I just did a 3” no mufflers (for right now)equal length exhaust on my 08” AWD Escalade And love how much nicer it sounds . I’m going to try the corsas, Thanks to your amazing sounding truck!

@tyler3533

Жыл бұрын

Did you have any issues with clearance from the awd, I have a 4x4 and I’m trying to figure if I can even do equal length

@peeweekirkland8177

7 ай бұрын

I’m doing the same thing to my 07

@pucegtr

6 ай бұрын

​@@tyler3533 Hey Tyler Did you ever figure out how to do the duels on aur 4x4? II just recently purchased a 2017 Chevy Suburban 4x4 , and wanna see about putting true duels on it like in the video.. Any help would be appreciated

Damn that sounds awesome I have a ls swapped 98 k1500 was going to do roughly the same set up

I love it! I hate that typical clappy "truck" sound and have been watching exhaust setup videos trying to find a way to get rid of it. This is a little too loud for what I want for my DD. But definitely informative for getting that more "sporty" sounding exhaust.

@Chase.bachler

Жыл бұрын

Loudness is all from the mufflers. Find quieter mufflers and you’ll be good to go!

Sounds good man. I was going to try double helixx and corsa xtremes on my 6.0 truck. But the 4l60 let go so I'm parking it and building a camaro now lol

It's the X crossover that makes that sound. The system is very well done and although not exactly my thing, I appreciate the sound he made with the end result. I cringe at cutting out that crossmember tho'. With a truck there is so much real estate there must be a better way than cutting that tubing out. I'm very familiar with that crossmember on the chevrolet trucks and just can't fathom cutting it out and not putting something back in. Still a great sound system in the end. Notice I called it a sound system, better than the radio! Exhaust note is everything! Dad taught me this 50 years ago with his favorite stuff at the time. His daily driver 1967 Olds 442 ran oval "hush thrush" mufflers, similar to the "cherry bomb" a straight thru thrush muffler was a long can shaped glasspack without the rounded ends. The hush thrush was an oval normal looking muffler with a very cool paint job out of the box, but they flowed well for the time and the sound was money back then.

@Chase.bachler

Жыл бұрын

There is no way around getting rid of the crossmember when doing this type of system, if you don’t the pipes will be directly under the driveshaft and the driveshaft will definitely hit it. This truck was involved in a accident and I rebuilt it myself. Cutting out the cross member doesn’t bother me in the slightest. I’m keeping this thing forever and I don’t think it’s that structurally needed. People who drag race these truck cut most of them out as well, and they’re still very rigid. Through, I have thought about fab’ing up a alternative crossbar to replace this one. But I don’t see how it’s possible with the exhaust and driveshaft in the way

Sounds super sick

Your truck sounds awesome! I'm really wanting to do this myself but I'll need to work on my skills and save some pennies.

I just watched the guy he’s talking about earlier! That truck is dope too! Both are dope tho

Good shit I am getting a 370 built for my ext cab and I'm going this route on the exhaust.

Damn makes me want to go buy a new project truck and make this same exact truck😅 regardless she's absolutely gorgeous... you definitely did everything perfect in my book.

That sounds amazing!

The shop I went to modified a stamped xpipe to have 45s coming out the front. It’s all mild steel but came out pretty clean. Waiting on mufflers now

Sounds amazing!

Sounds like a beast ✅

THE BEST SOUNDING pickup I have EVER heard!!!! Exceptional job my friend!!!! Only wish to have my avy sound like that!

@Chase.bachler

2 жыл бұрын

Thanks man!

@mrgrim6549

2 жыл бұрын

Just too bad I don’t have the money, I’d pay for you to come help me do mine up in similar fashion lol!!! I can’t get enough of how great it sounds. Close my eyes and can’t even tell it’s a truck.

@mrgrim6549

2 жыл бұрын

See your in Texas. Us Texas boys gotta have the best sounding trucks in the lands.

Very nice truck man.

Think I seen your truck on tiktok, fell in love. I screenshotted a comment of yours on the cam specs lol

Bruhhh this sounds crazy. I have a gen III with a SS2 cam going in to my s10 with a GTO clutch and flywheel. Hope it sounds like this. 2 mufflers 2 resonators and an x pipe

Sounds sick!!

Your neighbor must love you with your new sound 😂

Wow it sounds great! Most people boasting how good they sound, sound like ass. I’m impressed af

@Chase.bachler

2 жыл бұрын

Thanks man. I have a new cam on the way for this so it’ll add some more exhaust note too. Also am going to film some driving clips with my go pro soon

@baby-sharkgto4902

2 жыл бұрын

@@Chase.bachler right on, I'll be watching

Man it’s sounds good af

See, the perfect sounding truck does exist. And it wears a bowtie. 😎 Very nice setup bud.

@Chase.bachler

2 жыл бұрын

Appreciate it man!

@TheWolfMatt

2 жыл бұрын

@@Chase.bachler What power does it put down if you don't mind? Sounds like it should put around 400ish to the rear.

@Chase.bachler

2 жыл бұрын

@@TheWolfMatt never had it on the dyno, but it’s definitely over 400. It runs hard. Have a bigger cam ready to throw in it right now too.

@TheWolfMatt

2 жыл бұрын

@@Chase.bachler Put that bad boy on the rollers then. That'd make for one hell of a good video. Sub'd ya bud. I'm building a LQ4 for my 01 Z71 1500 Silverado currently.

Sounds amazing

This has to be the NASTIEST sounding Silverado I’ve ever heard. Lightweight flywheel for the super fast revs? Nice rig man.

This is one bad ass truck

Im a die hard Ford guy, and this is one of the sounding trucks I have heard. 😎👍

@Chase.bachler

2 жыл бұрын

Appreciate the comment brother! I’m also a big ford guy, just also happen to be a big LS guy. I really want to get my hands on a new 18+ F-150 5.0 10spd trucks. They are stupid fast for what they are

You can also do an equal-length performance Y-pipe using the 4/3 rule. Basically, whatever your collector/extension diameter is (which shouldn't be too big for the engine's output AKA you don't need dual 3" unless you're over 600whp) your single outlet needs to be 4/3 that diameter. Doing a little bit of rounding, dual 2.25 would be roughly single 3, dual 2.5 would be single 3.5, and dual 3 would be single 4. The 4/3 rule also works really well for custom X-pipes. Basically, get two shallow-angle elbows of your normal pipe (45 degrees or less) and cut 1/3 the diameter off of each before welding them together. If you have oversized duals (IE dual 3" on a sub 600whp setup) then you could do the 5/4 rule for making an X-pipe to bump velocity and scavenging a bit.

Truck sounds amazing Next time you have it on a lift please send me some pics

That’s absolutely perfect. God damn I love that sound and look. Have you scrapped it on anything? Seeing this makes me think twice about turboing the truck

@Chase.bachler

2 жыл бұрын

Doesn’t scrape on anything. Pipes are about even with the bottom of the gas tank. I’m with you on not going turbo now. I have plans for a 2.9L whipple now

I have a 6.0 that sound similar nice build

Man that sounds awesome

@Chase.bachler

2 жыл бұрын

Thanks man! It was a lot of work!

sounds amazing

DUDE THIS IS INSANE. People don’t realize how hard it is to replicate sounds because exhaust notes have a lot to do with the way the exhaust is shaped, size and length. Fucking great job man

@Chase.bachler

5 ай бұрын

Thanks man! It was a lot of work but still well worth it!

@marcusmartian8582

5 ай бұрын

@@Chase.bachler starting the tear down for a cam swap on my 08 ext cab. So I’ve been debating going longtube headers. Your video sealed the deal for me man.

Sounds badass 😎 🔥

Wow awesome!

Damn this sounds absolutely sick! Thanks for sharing the tips. What’s the dyno numbers on this this beauty?

Sounds fucking amazing man!

My exhaust fell off the other day and lost bank 2 sensor 2. Cat seemed to overheat on tht side shortly after AND simultaneously a coil decided to leave the chat. So it ran horrible. Cut the trash cans off, both were almost completely plugged. So now insanely loud and ran horrible. Installed used modern coil packs and built exhaust from end of downpipes back to cheap x-pipe (right where pass side cat was) and it just terminates at that because i ran out of daylight. It sounds INSANE. No tune and its getting better as i drive and it learns. It doesnt even break up at WOT anymore. I think if i run all the way back, ill be pretty close to the Corvette sound. True duals are dumb, exhaust scavenging is so much more important than anyone seems to realize. Your truck sounds awesome. Mines an 01' 2500hd with the 6.0. shes a knarly old tow truck, its about time it sounded like it too hahahaha

Omg THAT is badass.

Best LS truck I’ve heard. Will be doing mine but I want to know how much it would cost to do the piping since I already got long tube headers and will order corsa mufflers myself.

@Chase.bachler

Жыл бұрын

I think I spend around 250-270 in piping. The biggest cost item was the x-pipe. It sucks that I had to buy a whole kit for a CTSV just to get the x-pipe I needed. If you can scrounge just finding the correct style x pipe it won’t cost as much. But you’ll need a x pipe that 45’s in the front and then is straight going back.

Holy shit that sounds glorious man great job! Currently looking into building my gen 1 6.2 raptor motor.

I have a 78 box Chevy and i pretty much have the same exact set up you have milled heads to but I don’t want caprice sounding like a old school I want that corvette ss sound

Damn this sounds so much like my corvette

We used to use $15 glasspack mufflers to sounds EXACTLY the same

First off, Love the build and the way you have everything put together. Truck is beautiful. I just started piecing together everything for this exhaust system on my yukon. I have one question for you though. On your mufflers are they offset/center, ofset/offset or offset offset (same side). It was kind of difficult to see in the video. They look to be offset back and center forward but if you could reassure me on that, that would be awesome. Thank you.

@Chase.bachler

2 жыл бұрын

Awesome man. Glad I could be of inspiration for you! And yes they are a offset/center muffler. The offset part is where the tail pipes start, and the center is what is fed from the x pipe

@lanepourciau4637

Жыл бұрын

Exactly what mufflers do you have @chase bachler???

@lanepourciau4637

Жыл бұрын

@@Chase.bachler !!

@lanepourciau4637

Жыл бұрын

Can I direct message you personally somehow on this exhaust setup??

It's not just the exhaust that your hearing. A bump in compression gives the truck all bark

That’s the best sounding truck on KZread! I want to do that same to mine but it’s 4WD.. I love your instrument cluster too! I’ve been looking for one like yours but can’t find one anywhere. Where did you get it? Was the trans temp difficult to add?

@Chase.bachler

3 ай бұрын

I found this cluster on eBay actually. Was just a pre built custom SS cluster. Trans temp is built in and plug and play

Fuck yeah bro!! 👍 sounds awesome 👌

Damnnnn bro that thing sounds fucking mean!!!! 🔥🔥🔥

@Chase.bachler

2 жыл бұрын

Thanks man. People in person say it’s the best sounding truck they’ve heard. I’m gonna get some more clips soon with my go pro

@danziggycole6592

2 жыл бұрын

@@Chase.bachler best truck I ever heard and I’ve owned many of them 😂

Damn youre giving away the secrets lol Ive been runnjng this set up for 3 years now. I used speed engineering headers, a mustang x pipe, and magnaflow dual entry/duall exit with turn downs before the axle. I always get ask why my truck sounds the way it does.

@Chase.bachler

2 жыл бұрын

I’d love to hear your setup, you should post some sound clips of it

@BeyondTheBurnoutss

2 жыл бұрын

@@Chase.bachler sure, ill do it now

@BeyondTheBurnoutss

2 жыл бұрын

@@Chase.bachler posted a short vid on my page

@Chase.bachler

2 жыл бұрын

@@BeyondTheBurnoutss I really like that dude. Sounds good. If I decide to tone it down in the future I’ll definitely run some magnaflows like you.

@jayce5306

Жыл бұрын

@@Chase.bachler hey bro your truck sound exactly what I’m looking for if you don’t mind could you send me a video or picture of what it looks like under the truck tryna get a idea of what I’d be working with I can give you my Insta so you don’t gotta post on KZread lol thank you

Badass truck brotha!🔥💪...quick question on the muffler outlet/inlet choice, did you select offset/center....offset/offset or offset/offset w/ same side?

@Chase.bachler

Жыл бұрын

Center offset my man

Goddamn hell yeah dude.

Hey honestly this is some beautiful sounding truck no cap. 🤙🏽 I’m in love lmk if u want to work at an exhaust shop lol 😂

@Chase.bachler

2 жыл бұрын

Haha thanks man. Exhaust work sucks without a lift lol, but I already work at Texas speed and performance so I’m good lol

@pene7601

2 жыл бұрын

@@Chase.bachler what’s the best cam for a 5.3 for performance in your opinion I have a Silverado and I’m trying to put a 4k stall in it with a good cam just don’t know what to get to actually make it pull

@Chase.bachler

2 жыл бұрын

@@pene7601 with a 5.3 i wouldn’t go too big on a cam. You can get away with bigger cams on like a larger 6.0. For your setup I’d stay within the mid 220’s duration range. Like our TSP 220r, 224r, 224/228r, and our tried and true 228r on a 112 LSA. If it were me I’d run the 228r and run with it. Match that with some ported 243/799 heads, or a aftermarket set of heads and it’ll run good with that stall. If you have more questions give our sales team a call and they can show you more options, or custom spec you a cam if that’s what you want. Sales- 512-863-0900

I’m getting bored of my XR1’s, I’ve had them for a year. I want more loud now, always wanted Corsa

Sounds great I’m Try this on mines What mufflers are those

Sounds good.....

So I know the main thing is keeping them about same length..but would sound be affected if for example it can’t go all the way to rear of truck? It would stop right before axle? by the way, awesome sounding truck

Dude I gotta have this I wonder how it would sound on a 5.3 with out a cam

Truck sounds AWESOME! do you have the part numbers of the mufflers you used?

@Chase.bachler

Жыл бұрын

Corsa #cp300ct

What time of bed cover do you have it looks really nice 👌🏼

What would it require to have an LS powered vehicle to sound like ir similar to a Ferrari or Lamborghini? I was talking with an engine builder that makes a flatplane crankshaft for the LS engine. Equal length headers would probably be also required. Am I missing anything else that I might be forgetting. Thanks

Truck sounds great, does have drone?

Ls motors don’t sound good straight pipes this is the best sounding ls I’ve heard

Hey I’ve been really considering getting this exhaust done for my truck, I’ve asked you before about the price, but how loud is it because I’m still in high school and if it’s way to loud my parents will kill me. I only plan on getting the cat back custom made header and cam will still be stock

At work and didn’t have a chance to watch the whole vid but heard the sound of the truck. Sounds just like a vette, but is your engine a vortec? What all have you done to it? Is it just different cams and exhaust that contribute to it or does a tune affect it too?

Damn that thing sounds great! I really thought I would do mine, until I seen each muffler is $330. That's rediculous! I've got twins that are almost finished, I can't see sticking another almost $700 just in mufflers on it. Not sure if they would work well behind a turbo anyway.

Hey man quick question do you have any drone at cruising speed? I have a 18 4x4 ccsb silverado with a equal length exhaust and used the speed engineering mufflers with the kit but it drones like crazy. TIA

It sounds so good man. Built internals?

@Chase.bachler

2 жыл бұрын

Stock bottom end 6.0, have a built ls1 383 stroker in the works

Jeeeezus. I have a 6.0 Escalade. What would I have to do so it can sound almost the same

Wow.

Nice set up we’re can I purchase corvette tips like that

Gnarly!

Thats awsome!!! I got a 2017 silverado 5.3 fbo with headers and catless y pipe with carven competitor series dump exhaust and its loud but raspy when i get on it and ive been looking to change it out and your truck sounds amazing! So my question is if i were to do the same setup would mine sound that good and would i have to do an x pipe instead of y pipe?

@solder4444

2 жыл бұрын

And one more thing i forgot to ask sorry for all the questions, but would i be able to keep my single inlet and single out let or would i have to get dual outlet? Or x pipe to dual?

@mikeklossner5105

Жыл бұрын

Not a dick response, but if you listened to what he said... the sound comes from x pipe and equal length pipes. The crossmember needs removed at transmission to fit an x pipe. The y pipe is what kills the sound on LS engines

@solder4444

Жыл бұрын

@@mikeklossner5105 well i was asking to just make sure i understood correctly and that is why i asked the question.

Your muffler’s are they center in and center out or center in and offset coming out and I couldn’t tell in the video

What’s the engine mods? Damn thing revs fast like a rotary 😂 and it sounds good asf😮‍💨

Yo man same truck but ext cab gmc 05 fbo 227/238 cam but can I clear the stock crossmember or do I have to have the speed engineering crossmember