XS Scuba and SeaPearls bring you this great information from Worthington on the making of steel scuba cylinders. This is a brand new video.
Жүктеу.....
Пікірлер: 99
@DGFishRfine13 жыл бұрын
RIP Worthington... Still the best high pressure cylinders ever made, buoyancy-wise.
@burbman606 жыл бұрын
Love XS Scuba products Thanks for the cool video
@ZilogBob6 жыл бұрын
Very interesting video narrated by a real human for a change. Thank you.
@fatsotomuscles14 жыл бұрын
No wonder scuba gear and scuba diving is so expensive! And it was very interesting to watch this kind of stuff.
@phiksit14 жыл бұрын
Cool... i always wondered how these high pressure gas cylinders were made. Now I know :)
@miamitreasurehunter10 жыл бұрын
This was a very well presented and informative video Thank you for posting it.
@SirDeanosity
8 жыл бұрын
+Kelly Williamson More accurate than "Sorta How Its Made".
@WeBeYachting8 жыл бұрын
Enjoyed this video, thumbs up from us and cheers from sunny IGY Simpson Bay Marina, Sint Maarten in the Caribbean.
@jeboccuzzi1013 жыл бұрын
Great video. Great industry with a great safety record.
@wallybrown95094 жыл бұрын
Very cool, and interesting video.
@filmic16 жыл бұрын
Great to see Canadian made SCUBA cylinders. Must remember.
@alaind831
5 жыл бұрын
they closed the facility where scuba tanks were made (among others) back in 2013... bummer, good product.
@Mentorcase11 жыл бұрын
And a thing of beauty is created.
@kdc4312 жыл бұрын
"Tanks" for the video. Nyuk, nyuk.
@tifosiman6813 жыл бұрын
I used to work for Worthington cylinders in Columbus Ohio. I did the pressure check on 35 lb. tanks. It totally wore me out but the money was good.
@GeneralG181012 жыл бұрын
That was pretty cool Ive actually always wondered how they make oxy bottles
@Rhagedx8614 жыл бұрын
That was quite informational, Thnx
@ste3fc14 жыл бұрын
that programmed lathe is amazing :) :P
@markstengel76805 жыл бұрын
Well Done 👍
@kermit30au15 жыл бұрын
I agree with you. I have many Faber cylinders and they seem much more robust. I have about 14 cylinders and 10 are Fabers 6,10,12,15,18 litre in sizes and they are still looking new after 3 years of service. The local dive shops uses these other brands that look very scanky very quickly. Well each for their own I supose.
@jtjjbannie9 жыл бұрын
Very nice and informative video.
@ruuman13 жыл бұрын
a thing of beauty
@ericchoi87519 жыл бұрын
Amazing
@wahyudir49539 жыл бұрын
Apik tenan.nambah pengetahuan
@Zanzubaa14 жыл бұрын
WOW, that was a very interesting video. I don't know how much your cylinders cost but there worth every penny ha ha. Amazing stuff =)
@charonbond16 жыл бұрын
very cool video. thanks :)
@arnoldstollar53755 жыл бұрын
Stella cylinders can be visually inspected for rust inside by a dive shop. hydro test is done. To certify a scuba tank is safe to refill to 3000 psi. By a dive shop.
@arthurk426510 жыл бұрын
cool vid!
@arnoldstollar53755 жыл бұрын
Some scuba tanks are made of Aluminum, instead of steel. Aluminum tanks are lighter by a few pounds.They don’t rust as steel ones do. They can be lined and coated too with epoxy or plastic colors. Either cylinder scuba bottles is 40 pounds empty Add a 5 pound air fill, a backpack and weight belt with 10 pounds of lead weights on it, to get its total weight.
@winkerdude7 жыл бұрын
I worked for Luxfor (?) doing these jobs. An amazingly horrific sweat shop type of work. The draw machines were deadly. The other jobs were labor and time intensive.
@PowerNoob9000
7 жыл бұрын
Was they pay good though?
@pitt_surrounded_by_water
7 жыл бұрын
LUXFER... They only make Aluminium cylinders
@dreadhawk123
3 жыл бұрын
@@pitt_surrounded_by_water Uh no. They make plenty of steel.
@jasongiddensviper47814 жыл бұрын
pretty neat! I would like to work there.
@lowridersvt16 жыл бұрын
i love my x8-130 best tanks ever
@MarcoTUV14 жыл бұрын
@ste3fc yeah a CNC machinery is great ! i always wonder when i see a CNC machine making steel springs or in this case cylinders
@Necroman66611 жыл бұрын
Currently working on it you know....
@trumpsahead13 жыл бұрын
Very nice. Made in the USA?
@nealrasmussen48325 жыл бұрын
OMG! You forgot the most important use of all!!!? PAINTBALL!!!!!! :) WHAT an oversight!
@jamesbizs
5 жыл бұрын
Neal Rasmussen yeah. Don’t think the make paintball tanks
@Scrap500015 жыл бұрын
SOO FOOKING COOL!
@THATDAMNEDGAMERDoesStuff10 жыл бұрын
Yeah canada
@billleeboy16 жыл бұрын
I work for this place! Hey interesting to see it on KZread! Where is my picture?
@nicolasmunoz3575
4 жыл бұрын
billleeboy are you still working at that place?
@mpalaskokkalis14762 жыл бұрын
Perfect gas
@NewHotness5511 жыл бұрын
Wow, this was very educating. I gotta say it was a little TOO detailed but pretty neat. And honestly, there should be more vids very much like this one, well explained! :D
@legokidnaruto13 жыл бұрын
this was taken from how its made
@LordFabs11 жыл бұрын
Actually, sodium stearate is soap, but you still need all the other stuff
@hobbyguy745312 жыл бұрын
@XxLeurxX hm maybe we got our brains from the same production batch? lmao! I'm going to google for a firmware update hahaha Have a good one!
@darthvenom1003 жыл бұрын
Why am I hearing Under Pressure by Queen??
@TheRealPaul52711 жыл бұрын
1:36 giggity
@MrSailbadthesinner6 жыл бұрын
Same it was so obvious she was just reading a script!
@sylvianeprallet70219 жыл бұрын
Bonjour. Qui peut me traduire dans quoi est trempé le cylindre pour le rendre malléable svp ?? Merci.
@agile5213 жыл бұрын
I kept waiting for a pun
@MrLetsreplay13 жыл бұрын
how did i go from minecraft to this?!?!
@Woppieman12 жыл бұрын
I have no idea how I landed here and why I watched this...
@hhhmw12 жыл бұрын
and then Terminators are manufactured.
@quangle10212 жыл бұрын
yeah I'm not perfect at English, you understood what I've said so I don't care
@JellonaOO715 жыл бұрын
same video as in how its made?
@user-dc5on3nm6p9 жыл бұрын
Our company is doing the high frequency heating, heating mode is more quick, efficient, environmental protection, if you are interested can contact us, thank you! China shenqiu yongda high-frequency equipment CO.,LTD
@GeneralG181012 жыл бұрын
LOLz funny XD
@Grundalizer13 жыл бұрын
@MongoloidBabyUSA GO GO MONGOLOID BABY
@krashdown10212 жыл бұрын
its called extruding
@Pierre890715 жыл бұрын
dont stick your arm under the pressing Ram.
@imDerekMartell14 жыл бұрын
I saw this on how it's made. Are you telling me HIM doesn't go out and film stuff? They take the demo videos (With permission I assume [obviously]) and they do a voice over? I am dissapoint.
@baloog812 жыл бұрын
I'll take 20
@OMBIC11 жыл бұрын
lol, thay missid a stage haha
@joewhiteman94627 жыл бұрын
does that mean there made of high carbon steel?huum.I know what to make a big knife from now.
@Rexfailed10 жыл бұрын
Lmao
@mariaeugenialopez67202 жыл бұрын
Español
@chrisgrace61114 жыл бұрын
C
@chowtsang56082 жыл бұрын
.
@kbeta11 жыл бұрын
lol i am a man look at 3:07
@wakawakasplat13 жыл бұрын
Zinc (phospate sodium blah bla blah...) or soap!
@hobbyguy745312 жыл бұрын
@XxLeurxX hahaha... how stupid are we?! I did it too!! LMAO
@croissant300011 жыл бұрын
i hate the background music in such videos...
@brothyr7 жыл бұрын
five-thirds? 4:10
@BadKittus
7 жыл бұрын
Adam Rivera two fifths above working pressure
@JonD58239
6 жыл бұрын
No, two thirds above working pressure. Five thirds (5/3) is the same as 1 + 2/3 or 66.67% above working pressure
@goodnessgodfrey533411 жыл бұрын
LOL
@quangle10212 жыл бұрын
dat voice...
@quangle10212 жыл бұрын
I know how to spell that, but spelling "dat" means differently
@OMBIC12 жыл бұрын
shame chuck norris will never nead one -.-
@Zeron1812 жыл бұрын
Stolen from how It's made...you just voiced over it.
@richard2mitchell12 жыл бұрын
If that is true what the fuck does *differently voice* mean?
Пікірлер: 99
RIP Worthington... Still the best high pressure cylinders ever made, buoyancy-wise.
Love XS Scuba products Thanks for the cool video
Very interesting video narrated by a real human for a change. Thank you.
No wonder scuba gear and scuba diving is so expensive! And it was very interesting to watch this kind of stuff.
Cool... i always wondered how these high pressure gas cylinders were made. Now I know :)
This was a very well presented and informative video Thank you for posting it.
@SirDeanosity
8 жыл бұрын
+Kelly Williamson More accurate than "Sorta How Its Made".
Enjoyed this video, thumbs up from us and cheers from sunny IGY Simpson Bay Marina, Sint Maarten in the Caribbean.
Great video. Great industry with a great safety record.
Very cool, and interesting video.
Great to see Canadian made SCUBA cylinders. Must remember.
@alaind831
5 жыл бұрын
they closed the facility where scuba tanks were made (among others) back in 2013... bummer, good product.
And a thing of beauty is created.
"Tanks" for the video. Nyuk, nyuk.
I used to work for Worthington cylinders in Columbus Ohio. I did the pressure check on 35 lb. tanks. It totally wore me out but the money was good.
That was pretty cool Ive actually always wondered how they make oxy bottles
That was quite informational, Thnx
that programmed lathe is amazing :) :P
Well Done 👍
I agree with you. I have many Faber cylinders and they seem much more robust. I have about 14 cylinders and 10 are Fabers 6,10,12,15,18 litre in sizes and they are still looking new after 3 years of service. The local dive shops uses these other brands that look very scanky very quickly. Well each for their own I supose.
Very nice and informative video.
a thing of beauty
Amazing
Apik tenan.nambah pengetahuan
WOW, that was a very interesting video. I don't know how much your cylinders cost but there worth every penny ha ha. Amazing stuff =)
very cool video. thanks :)
Stella cylinders can be visually inspected for rust inside by a dive shop. hydro test is done. To certify a scuba tank is safe to refill to 3000 psi. By a dive shop.
cool vid!
Some scuba tanks are made of Aluminum, instead of steel. Aluminum tanks are lighter by a few pounds.They don’t rust as steel ones do. They can be lined and coated too with epoxy or plastic colors. Either cylinder scuba bottles is 40 pounds empty Add a 5 pound air fill, a backpack and weight belt with 10 pounds of lead weights on it, to get its total weight.
I worked for Luxfor (?) doing these jobs. An amazingly horrific sweat shop type of work. The draw machines were deadly. The other jobs were labor and time intensive.
@PowerNoob9000
7 жыл бұрын
Was they pay good though?
@pitt_surrounded_by_water
7 жыл бұрын
LUXFER... They only make Aluminium cylinders
@dreadhawk123
3 жыл бұрын
@@pitt_surrounded_by_water Uh no. They make plenty of steel.
pretty neat! I would like to work there.
i love my x8-130 best tanks ever
@ste3fc yeah a CNC machinery is great ! i always wonder when i see a CNC machine making steel springs or in this case cylinders
Currently working on it you know....
Very nice. Made in the USA?
OMG! You forgot the most important use of all!!!? PAINTBALL!!!!!! :) WHAT an oversight!
@jamesbizs
5 жыл бұрын
Neal Rasmussen yeah. Don’t think the make paintball tanks
SOO FOOKING COOL!
Yeah canada
I work for this place! Hey interesting to see it on KZread! Where is my picture?
@nicolasmunoz3575
4 жыл бұрын
billleeboy are you still working at that place?
Perfect gas
Wow, this was very educating. I gotta say it was a little TOO detailed but pretty neat. And honestly, there should be more vids very much like this one, well explained! :D
this was taken from how its made
Actually, sodium stearate is soap, but you still need all the other stuff
@XxLeurxX hm maybe we got our brains from the same production batch? lmao! I'm going to google for a firmware update hahaha Have a good one!
Why am I hearing Under Pressure by Queen??
1:36 giggity
Same it was so obvious she was just reading a script!
Bonjour. Qui peut me traduire dans quoi est trempé le cylindre pour le rendre malléable svp ?? Merci.
I kept waiting for a pun
how did i go from minecraft to this?!?!
I have no idea how I landed here and why I watched this...
and then Terminators are manufactured.
yeah I'm not perfect at English, you understood what I've said so I don't care
same video as in how its made?
Our company is doing the high frequency heating, heating mode is more quick, efficient, environmental protection, if you are interested can contact us, thank you! China shenqiu yongda high-frequency equipment CO.,LTD
LOLz funny XD
@MongoloidBabyUSA GO GO MONGOLOID BABY
its called extruding
dont stick your arm under the pressing Ram.
I saw this on how it's made. Are you telling me HIM doesn't go out and film stuff? They take the demo videos (With permission I assume [obviously]) and they do a voice over? I am dissapoint.
I'll take 20
lol, thay missid a stage haha
does that mean there made of high carbon steel?huum.I know what to make a big knife from now.
Lmao
Español
C
.
lol i am a man look at 3:07
Zinc (phospate sodium blah bla blah...) or soap!
@XxLeurxX hahaha... how stupid are we?! I did it too!! LMAO
i hate the background music in such videos...
five-thirds? 4:10
@BadKittus
7 жыл бұрын
Adam Rivera two fifths above working pressure
@JonD58239
6 жыл бұрын
No, two thirds above working pressure. Five thirds (5/3) is the same as 1 + 2/3 or 66.67% above working pressure
LOL
dat voice...
I know how to spell that, but spelling "dat" means differently
shame chuck norris will never nead one -.-
Stolen from how It's made...you just voiced over it.
If that is true what the fuck does *differently voice* mean?
It's not? You must be tiny then...
Learn to spell.
Amazing