MAKING WALNUT 3D WALL PANELS
Тәжірибелік нұсқаулар және стиль
In this weeks project i was making walnut 3d wall panels. I used walnut lumber for this project. The lumber was 50 mm thick and i made 200x50 mm panels. . I made 3 thicknesses - the first one was 3 mm, second 6 mm and the third one was 8 mm.
Then i used flexible flooring adhesive by SIKA and glued the panels on the wall. After that i used BELINKA CUTTING BOARD oil to protect the surface.
++++++++++++++++++++++++++++++++++++++++++++++++++++++
---------------------------------------------------------------
SIKA FLEXIBLE FLOORING ADHESIVE -------------
+ UNITED KINGDOM: amzn.to/2VwJQzl
+ GERMANY: amzn.to/2GWWHaC
If you have to clean the surface - use this product:
Sika Remover-208 ---------------------
+ UNITED KINGDOM: amzn.to/2GWFkH0
+ GERMANY: amzn.to/2SE8XhZ
++++++++++++++++++++++++++++++++++++++++++++++++++++++
DO YOU WANT TO SUPPORT SAWBLADE PROJECTS?
There is many ways. One way is to use this affiliate links if you shop at amazon. It will not costs you anything, but i will get a small percentage from amazon from your purchase. This can helps a lot.
GERMANY: amzn.to/2lnpO8E
UNITED KINGDOM: amzn.to/2lTM5Ox
FACEBOOK: SAWBLADE PROJECTS
INSTAGRAM SAWBLADE PROJECTS
Twitter: francsumandl
www.sawbladeprojects.com
EVERY WEEK A NEW VIDEO!
music by: EPIDEMIC SOUNDS www.epidemicsound.com/referra...
#sawbladeprojects #3dwallpanels #3dwalldecor
Пікірлер: 30
More tools than Tim The tool man lol. Excellent results 👍🏻
Great job!!!
Fantastic, going now to find a wall in the house! Thanks
@sumandl
5 жыл бұрын
great!
WOW thats a big cutting board!! ;) Looks awesome dude
@sumandl
5 жыл бұрын
Thanx Jamie! Cutting board xlll aka Paul Jackman style 😃
@manafsagar8605
4 жыл бұрын
Were I get this cutting machine
good
Great looking wall. I only have one question. Did you make various thicknesses?
@sumandl
5 жыл бұрын
yes Sir. I used 3mm, 6 mm and 8 mm peaces. That way i got the 3d effect.
Very cool! Think I am going to do this in my home office. Any concern about gaps showing between the pieces if the wood contracts?
@sumandl
2 жыл бұрын
no couse i used kiln dried wood!
Absolutely lovely Can I please ask how do you stack them 3mm piece ,6mm,8mm then back to 3 mm and following it that way Thank you
@sumandl
2 жыл бұрын
Yes something like that. But don't repeat rhe same pattern... chaotic i way more attractive
Whats the song at the end of this amazing video 😳😳
Wow it looks amazing. What table saw do you use?
@sumandl
5 жыл бұрын
it's a scm minimax combination unit
Fantastic Franc, was looking forward to seeing this video! What finish did you use on them? Or are they left natural?
@sumandl
5 жыл бұрын
Thank you so much. I used the good old BELINKA oil (like for cutting boards). Becouse there are kids involved in the living room, we wanted to put something natural.
@NickMakes
5 жыл бұрын
@@sumandl i see, great idea!!
What is the sticker used?
Hi!! What type of wood can I use instead of the walnut? Just to save some money and apply the stain by my self
@sumandl
3 жыл бұрын
You can use anything you want 🤟🏻
Get the Tools i use here - amzn.to/2VfXIQk Get the P.E.C. combination squares i use in my shop - lddy.no/sbgq
Franc eno vprašanje, vidim, da je kmalu po tvojem revjuju Metabo 261 izginil iz delavnice. Se ni obnesel? S čim si ga to zamenjal? Btw, lepa stena, maestro!
@sumandl
5 жыл бұрын
Se jo mam in tudi uporabljam. Oslicna zaga za majhne fine reze. Bom pa nabavil dodatno se nekaj vecjega za razrez
@berghauss
5 жыл бұрын
A, sorry, nisem vedel. Ravno tvoj video me je prepričal, da jo nabavim tudi sam, za manjša hobi dela, pred kako urco sem jo še zapakirano odložil v delavnici. Hvala ti za odgovor in veliko uspeha še naprej!
@sumandl
5 жыл бұрын
super! veliko lepih trenutkov v delavnici ti zelim
so U quit give hugs say sorry etc...