It’s the little touches like the dremel to smooth the fletch transition that shows the care and craftsmanship , incredible skill.

I’ve been making wood arrows about 33 years you could make my arrows any day .very good work

@addictivearchery1123

Жыл бұрын

Thank you

You’re one of the only channels that I have seen on traditional archery that is worth watching. Most of them just babble on to hear themselves talk and have only a few moments that convey any knowledge.

This is the best arrow making video i have ever seen, and I doubt If I ever get to see anyone top that. Wow really. Impressive work and pure ASMR too. 🙏

I usually hate the music people put on their videos. Yours is awesome. I can watch this over and over and over! Thanks Andy!

Hello! My name is Dave Schaub. I first saw you on Instagram. I was impressed with your work. I’m 71 now and my dad gave me a small, but functional longbow when I was 6. I have a picture of it. That and my favorite place where I would ride my bicycle was loaded with pheasants. I meant a big cock bird face to face on a well worn path. He just stood there like he was waiting for me to get out of his way. He looked three feet tall to me because I was so small. I carefully pulled back as far as I could and watched the arrow sail right over his head. 😊 After searching for my arrow that I finally found. I realized how easy it was to lose an arrow. My brain was racing trying to figure out what I could use that I have at my disposal. I remember we found that we didn’t have a clue. what were we to do. So I went to the library and found a couple of books to help me along. We had a archery shop in town so I would ride my bike to pick up supplies. That very store sold all kinds of bows and of course I fell in love with one. With my very first paycheck I hopped on my bike and went and bought my Red Wing Falcon. I would shoot and shoot that bow so much I graduated to shooting wood chucks. That’s when I found out that shooting at chucks is very hard on arrows. It’s either the rocks or the Chuck breaks them diving in there hole. So I started making my own. I’m definitely going to buy some shafts from you. If that’s okay?

Nice video and love the music

Thank you for making these videos, they are so helpful! it's what started me to make my own arrows. I really admire your craftsmanship!!

When I saw the cresting put on I paused and went straight to the website. Now I have to come up with a design to order . The gallery of arrows is mind blowing . Your a master craftsman sir !

Congratulations. I admire your work discipline and your care for your work. If I were close, I'd be your client. Your workshop and the equipment you use show the value you give your business. I wish you success .. .. Greetings from Turkey

Inspirational! i'll be enjoying this once my shop is built!

Your arrow are works of art as well as perfectly functional.

New deal to me about the DREMAL tool to smooth the leading edge! SMART IDEA!

Awesome video! I love seeing all your arrows on Instagram too!

What a great video from start to the finished arrow, Andy l didn't realise just how much work went into making arrows . At a guess l would say maybe 100+ hours for a dozen arrows , but what a beautiful end product Thank's for sharing this insight into making arrows. This has got to be the best series on KZread 👍👍👍

Over a long life I have made many arrows, but none were as great looking as yours, you a true craftsman. My arrows were functionally perfect, and they killed everything from squirrels to elk, but again, they sure weren't beautiful like your arrows are. Thank you for the video.

@addictivearchery1123

5 жыл бұрын

J. A. Hunsinger thanks for watching and taking the time to leave a comment. 👍

excellent job! 10 point! Thank yuo!

Amazing work... 😍😍😍

You have just made a new customer. And the fact that you hunt with Clay Hayes puts the cherry on top. Your work is beautiful. As soon a possible I will be making an order. Keep coming with the great videos.

@addictivearchery1123

5 жыл бұрын

Thanks Dana.

Luv to watch a craftsman at work

Oh man, why did you stop making videos? I could watch those arrow building videos the whole day. Different styles, different ideas... Fun!

@addictivearchery1123

4 жыл бұрын

Pumpwerk_ I’m hoping to start beck up soon. Life happens.

@bogenstark_kai8461

4 жыл бұрын

@@addictivearchery1123 i'm not hating man, just the opposite, i search for cool arrowmaking videos, tipps on how to make good (and goodlooking) arrows and all that good stuff. It's so much fun building arrows. I myself stopped for years with archery and now I want to get back into it, and your videos and those of clay hayes really brought the fire back!

@addictivearchery1123

4 жыл бұрын

Pumpwerk_ not taken that way at all. I appreciate your support. I’m still making arrows daily. Check me out in Instagram and Facebook for my latest work.

@bogenstark_kai8461

4 жыл бұрын

@@addictivearchery1123 sounds great! Scrolled through your Instagram! Great arrows! You really have a gift for that kind of stuff. And I have a great idea for a new video... Could you show how you go about finding the right feathers for your spliced fletchings? They look awesome, but everytime I tried it, it didn't work as great as in your pictures

I've been shooting a bow ever since I was two and this guy makes the best arrow I've seen other than me when I make my own he only left out one thing is showing grain going away from the archers hand in case one breaks also I do a trick on putting on field poits I drill a small hole through them and after gluing them on I pin them with brass so you don't loose one in a new 3d. Target. This guy can build arrows also I hit the back of the flinching with glue from moisture

not only skillful but wears his hat at the same time . very cool .

Tank you!

Wow. Just found youre channel from clay hayes. What a craftmanship making those arrows. Best regards from sweden

@addictivearchery1123

4 жыл бұрын

Tomas Malmros thank you

Great video

I have watched this multiple times, Crafty,,, Brilliant Stuff! I love the Asian Tune at the end, reminds me my weak Aussie Dollar Buys ten wood, bamboo arrows on Ebay for the price of a packet of Cigarettes in my country. Great Show AA, the colour work, Superb, Beauty Mate.

@addictivearchery1123

6 жыл бұрын

LOL. Thanks for taking the time to leave a reply. I appreciate it.

A really and carefully job! Well done! What do you use as pitch esin as arrows protection and to strengthen arrows? Cheers

What glue do you use? And do you use the same one for the nocks, point, and fletching?

Hello sir how do u determines from which length you do the tail tapering and how small it is?

Hey, love your videos! Thanks for taking the time to share the knowledge. You helped inspire me to get started on making my own arrows. Everything involved in the process is new to me, but its all coming together bit by bit. I'm having problems getting my points to fit, after finishing the shaft. I think the shaft is swelling, as well as the lacquer build up. I'm sanding, using the bearpaw taper tool, methylated spirits to raise the grain, sanding, alcohol stain, sanding, 3 times cellulose sanding sealer with sanding between, nock, crest, 3 or 4 dips in acrylic lacquer. Also keeping straight along the way. I nock after sealing to help deal with getting them to fit after painting and lacquer, but I'm struggling with points. I'm thinking of trying the next size points up? Also, do you ship to the UK?

@Addictive Archery can you also use kind of straight sticks from the hardware store (i life in the Netherlands so it's quite different here😂 but it's almost the same) cause im a very beginner in this so i have a small budget and schafts from an archery store are at a long period a little bit to exspensive for me.

Do you also make footed arrows and if so can you a video on it?

Do you ever use sanding sealer first?

How do you determine which end is best for the nock and which end is best for the point other than the ability to "cut out" any bend in the shaft? BTW: I LOVE the videos!!

@buckfifty3470

3 жыл бұрын

Very important to look at the direction of the wood grain to determine the orientation of the nock. Make sure the rift is on top. If the shaft should give out upon release, you want the shaft to go above your bow hand...not down into it. Highly recommend 'The Traditional Bowhunter's Handbook' by T.J. Conrads, chapter 15, page147-148.

@stacysimpkins5566

Жыл бұрын

I am going through the videos and this was a question I also had. Thanks @jamesholzapfel1905 for asking it. Thank you too for the excellent answer.

wow im surprised grinding the feathers, and painting it i thought it was tape on the feathers looks so clean

Well i know where ill be buying my arrows from now on..

What cresting machine do you use?

Hey Andy what brand / model are those clips you use to hang the arrows? I heard you mention it in another video but can’t find it... love the videos and thanks for sharing your craft.

Do you make footed arrows? If so a video on them would be great.

Very nice! I am wondering if you sometimes vary the number of dips of some of the arrows to even out weight within a set?

@addictivearchery1123

2 жыл бұрын

Yes towards the end I will weigh them to make sure they are staying within ten grains or less.

You are indeed a craftsman. I’m very impressed. Your arrows are perfect to my way of thinking. A problem I have is my 33” + draw length. I’ve had archery shops have me pull a draw measure because they didn’t believe me. I’m sure there are people bigger than me with a longer draw. Why is it so difficult for people like me to get the arrows we require, and even bows are becoming hard to find. Not recurve or long bows but modern compound bows for hunting. I’ve been told I have to put a three or four inch loop on the string for some of these small modern compound bows. Frustrating.

@markwright7146

3 жыл бұрын

do you shoot a traditional bow? Someone should be able to make a larger version for you then for some one like me that has a 28 inch draw.

It is really beautiful work ,but if i were shooting these arrows with a thought of loosing one i would for shore miss the target because most of us are medium budget archers

How do i go about ordering some arrows from you ?

I have so many questions, do u start with round shaft or square. In love in northern ontario in the east no douglases here but tamarack n most other coniferous trees. Are arrows made from the tree or branches the best!! I am not into making primitive arrows for my primitive bows but use tools to replicate the past, too young to have the patience maybe for straightening by hand every couple days. n finding shoots or arrows look good outside but when I skin them there like 3 or 4 hood arrows rest waste, I don’t like taking life n wasting it.

Great video, thanks... What may I ask are you using for cresting/ sealing? Water based or lacquer? Particularly interested in what you are using over the cresting. Again, thanks..

@addictivearchery1123

2 жыл бұрын

I use True North water based sealer. Check out my newest series for exactly how to use it.

Great video showing all the steps. I noticed that you used a different clear coat for the crested end over the cresting. then you did for the shaft. Could you explain? And if you wanted to paint the part under the Fletching, would you still stain first or not? Thanks.

@addictivearchery1123

3 жыл бұрын

Great question Mark. Yes when I clear coat over painted areas I dip in a water based clear. This maintains the bright white appearance. The shaft (point) end gets Dalys Pro Fin, which is oil based and will “yellow” the paint slightly. Depending on the look you are trying to achieve you can stain first. Check out my entire series for details. I’m also filming some updates soon. Thanks for watching.

@markwright7146

3 жыл бұрын

@@addictivearchery1123 Thanks you have great videos and I realize I won’t save any money. LOL but I love to dabble and stuff like this as well as reloading ammunition etc. I will be ordering some shafts from you soon. Happy hunting

Very nice work!!! where do you get the bottle/tube for dipping the shafts in I'm using PVC pipe but the cap is finicky and a pain for me yours have screw on caps just what I need

@addictivearchery1123

3 жыл бұрын

Here you go. www.addictivearchery.com/products/dip-tubes

Sorry for commenting on older video but what clamps are you using you hang your shafts I've been using close pins but they don't work

@addictivearchery1123

5 жыл бұрын

Jonathan Wilfred Michelin they are a clothes pin with a rubber pad. Sometimes they are labeled for “delicate clothing “. They work great. Thanks for watching.

@Kurogane_666

5 жыл бұрын

@@addictivearchery1123 I love your dip setup, I'm redoing some arrows I have and I wish I had the creating Machine haha, I love making wooden arrows, the steps and the challenge of a crooked shaft , thank you for replying, wish I could get some of your shafts, working on a design that have black and yellow feathers

How do you decide which is to be the nock or tip end of the shaft?

@buckfifty3470

3 жыл бұрын

Very important to look at the direction of the wood grain to determine the orientation of the nock. Make sure the rift is on top. if the shaft should give out upon release, you want the shaft to go above your bow hand...not down into it. Highly recommend 'The Traditional Bowhunter's Handbook' by T.J. Conrads, chapter 15, page147-148.

I also meant to ask you, is there a certain helical to use on arrows or is it just preference. I think I spelled that right??

@addictivearchery1123

5 жыл бұрын

Just preference. As long as all the helicals are the same per arrow and match the bevel of broadhead if your shooting a single bevel they should fly great.

What is an acceptable total grain range across a dozen arrows?

@buckfifty3470

3 жыл бұрын

Inside 10.

I remember watching my cousin make his own arrows years ago. He collected his own feathers and after being glued on rotated the arrow through a hot wire to shape each one. I cannot believe the price of commercial feather fletchings. I made my own cresting machine power by a electric screw driver and can interchange cards to alter the patterns.

@jtc1947

4 жыл бұрын

@GVET ? Have to be careful about gathering feathers? Some officious Game and fish guy might believe that You are poaching! I have a friend who collects WILD GOOSE feathers when they are moulting. Has to be very careful! He is not doing anything wrong but some officials just care about the tickets!

What type of clips do you use for your arrow rack?😊

@addictivearchery1123

Жыл бұрын

They are made for delicate clothing and have a little rubber gripper in the jaws. I don’t remember the brands.

how do i order some!!!!!!

What paint did you use?

@addictivearchery1123

Жыл бұрын

I use true North. It’s available on my website

@MM-qc1tf

Жыл бұрын

@@addictivearchery1123 thank you very much.

Which glue applies where the pen is born???

@addictivearchery1123

5 жыл бұрын

Fernando Curbelo I use Duco cement to glue the feathers on.

@fernandocurbelo4794

5 жыл бұрын

@@addictivearchery1123 Thank you, very nice arrows!

Where do I order

@addictivearchery1123

3 жыл бұрын

Call or contact me. addictivearchery.com

Very pretty, but not very traditional, no self or horn nocks, just plastic nocks? Fletching not bound, just glued? Would not be allowed in any of the traditional contests I've entered.

@69yenko65

4 жыл бұрын

I've been shooting arrows for years made very similar to this. Fletching doesn't have to be bound as long as it's finished on the ends with some extra glue like this they work just fine