I can’t wait for the engine tuning episode to come out. I’m so tired of my bike flaming out at low idle and that low end sputter drives me crazy. You rock Rich!

@RoadtoRomaniacs

23 күн бұрын

Flywheel weight, tsp tune and head, oversized Pv cover. Perfect bike now

@klauke

22 күн бұрын

@@RoadtoRomaniacswhat size flywheel weight did you use?

@williamcrotts7054

22 күн бұрын

Check the voltage on your TPS yet?

@robsev24

16 күн бұрын

​@@klaukeI have a 10oz and love it '22 te300i Rockstar

I love how you can ride these cool little spots for hrs. Seems like every time I go riding we just put miles on and I don’t polish my skills.

Great review. I'm on the GG EC250, I don't like brakes that crap too much, I have the stock braketec brakes and I prefer them to the Brembo , and the clutch I think is better than the Brembo, the modulation point never changes with heat, never get clutch drag, there great.

wicked as always - thanks

Should be called, throwing away the WORST brakes and spending lots of money on the BEST😂

@IRCTireUSAMoto

22 күн бұрын

😂😂😂 that’s exactly right!!

You are so amazing at demonstrating technique and why the bike set up is so important. Brakes, gears, and human.

@IRCTireUSAMoto

22 күн бұрын

Thanks so much for the support!

My friend was pretty disappointed when the Husky he ordered came in with Braketec, he founds some Brembos for a good price on a snowbike web site. Some people build a snowbike and don't ever plan on putting the wheels back on and sell off the wheels and brakes for a good price.

My back caliper broke last week! No crash. Just snapped while riding.

That’s >$2000 in brakes right there! I spent a few bucks on EBC pads for my TE and they’re actually acceptable now. 😂

@IRCTireUSAMoto

22 күн бұрын

But man they are sweet

luckily looks like 2025 husky have brembos along with KTM. so just GG has the braketech

@jarrod1687

23 күн бұрын

Only the pro husky has the brembo, the tx300 has brembo as well

@RaphaelPais

22 күн бұрын

@@jarrod1687 for 2025, brembo clutch and brake for all TE and FE.... google: husqvarna 2025 brembo

I heard they used breaktec during Covid because Brembo had production issues they are going back with brembo now - I have 23 Husky 501 smoked the breaktec rear brake 2nd time out - bent the caliper - have new brembos now no more issues

Hi. On my Gas Gas ec350 2023 (same braketec system) i've only changed brake pads to MotoMaster Racing Gp. Night and day difference and only few $.

Thank you ❤

As usual , great video. Could you please tell us which tracking system do you use ? This one seems to work pretty well... Useful for us practicing alone. Many thanks.

Do any rear disk guards fit on that Motomaster rear brake ?

What would make you choose 12/48 or 12/50? Im on a 300 xcw and run 12/47 to keep my stock chain and have my rear wheel a notch inside from stock. Wonder what i should look to make the right choice of gearing

Just curious: are you picky about pads? Do you like the ones that came with the kit? As always… excellent video!

@IRCTireUSAMoto

23 күн бұрын

The pads are killer!!

did you have to put a new longer chain on to run the 48t? I have the same bike. sick vids!

Thanks for your video, its very interesting and good explain. For me this brake are very expensive, I have a money for the live and the broken motorbike parts 😅. In front I put a nissin the old gas-gas bike and brake very strong more than new brembo braked Im very happy. In otherside I think If you use a 12-tooth sprocket, you will quickly wear out the chain sliders. For the suspension chapter, I use softer springs, more suited for enduro. The stock springs that come with the bike are motocross springs. So, there's always a part of the suspension that we don't use, even on the hardest descents. For the rear suspension, there's a rod parts in aftermarket with a Casima coating that can be replaced and re-valved it is not expensive suspension rod. It looks like in motorbike. Additionally, in the front suspension, by removing the stock motocross springs, you can install cone Valve forks just the tubes, which come with a black anti-friction system, (looks more like in husky pro version with black chassis) and take the opportunity to re-valve. I hope these comments help you in your research on suspensions. Greetings from the north of Spain

I think we'll see some shampoo promo with Rich soon )) thx for the video!)

Hello. I see you put floating front rotor. Aren't you worried about the dirt or damage? The theory (common knowledge from internet ;-)) is that fixed rotor and floating caliper is the way to go on dirt bike. The reason i am asking is that I consider changing rotor size in my Honda CRF250L and aftermarket/bigger rotors avalilable to me are usually floating. Tkank you

I have motomaster big brake kit on my sherco 450 supermoto...great quality stuff

Hey! One question regarding lugging the bike without moving it on a steep uphill, when you've lost momentum but just want to hold the bike on the clutch so that it doesn't roll down - what can you suggest apart from the usual clutch drills to improve my problem... When I'm on quite steep stuff with limestone/silt on top of it, or similar, I seem to struggle holding the bike on the clutch, because if I give a bit too much gas or let the clutch out a bit too much the tire spins, whilst if I try to hold the clutch in decently but give small throttle so that rpms are nice and low, I usually stall the bike and then, as you can understand, the situation become bad quite fast... Do I just need to give more throttle with the clutch almost completely in to provide enough power to the engine so that it doesn't stall whilst at the same time because of the clutch almost in only tiny bit of power is transferred to the ground to not break traction, or is there something else I should be doing/practicing? Thanks!

@IRCTireUSAMoto

22 күн бұрын

Sounds like you’re practicing the right thing! Just takes time! I’d have to see you up close to see what mistakes may be happening

Perhaps a bit more info on bite point. Is it adjustable? Lever ratio? Good stuff though. Good brakes in terms of build, but man they are pricey!

I need to design a bash gard for the pipe

2011 350 Sxf, thoughts?.. Edit: mostly for trials type riding. Power and control, imo, is unprecedented.. also, mine is still on less than 50H. Barely, but stilll! xD

i have the same bike and it came with clutch drag… any fix you’ve done?

@IRCTireUSAMoto

22 күн бұрын

Never had any clutch drag

Next bike yz 250 x??

you lost your side fairing man ??? cuze i lost mine too its so sad looks like the dont hold pretty good

Did you make all these mods to the Beta as well?

@IRCTireUSAMoto

23 күн бұрын

Nope!!

Thanks for the video. The quality of ktm/husky stuff is of increasing concern, callipers that break by themselves. Ok, you’ve upgraded all to motomaster, I’m jealous, but that will have cost you thousands, not for everybody, especially after forking out for a brand new bike! I made the decision to wait for the 2025 models with brembo brakes…

Are guys using the braketec masters with brembo calipers?

@IRCTireUSAMoto

22 күн бұрын

Yes 👍

hello rich good day to you Can u please do a content or review using 125-150cc bikes for enduro trail.. Fan here from the Philippines.

Brembo or Motomaster?

I wonder why they use Braketec. My 23 gasgas ex Braketec brakes are meh. Front one barely stops from new. No air in the line.

@cedric-eq3hi

23 күн бұрын

Brembo all the way! Can’t fail, going with the best of the rest😏

@lorenmuhling3633

23 күн бұрын

My 23 EX 300 came with brembos. EC comes with braketec but the EX were all brembo until 24 model

@keshmo12

23 күн бұрын

@@lorenmuhling3633 hmm maybe they put brembos on some? My clutch is brembo but the brakes are definitely braketec. And I've been looking for flags that bolt on like they do to the mounts on the brembo ones. I found some websites say they're brembo and some say braketec.

@lorenmuhling3633

23 күн бұрын

Likely your dealer did the old switcheroo on that bike before selling it. they don't come mixed matched. typically they will swap the clutch master over as well so it's all even. if you bought it brand new, that's likely what happened.

@keshmo12

23 күн бұрын

@@lorenmuhling3633 nah my dealer was incompetent. When I bought it they spent 10 minutes searching for a spark plug to sell me. Sold me a $25 plug that wasn't even close to the same. Couldn't even imagine them doing that since the brakes are shipped on them. I really do think the gasgas were just spare parts that year and they ran out of braketec. The spec page says braketec brakes for the 21-23 ex. Ec has brembo.

I can't imagine dropping $12k on a brand new bike, then having to turn right around and drop another $2k on brakes...

Husqvarna, KTMs premium brand. But first you need to find a 2018 KTM and rob Brembo brakes, then replace the entire fork and shock innards, install after market piston kit, 2stroke performance head and re-map hmmm..... I dont think so

woah! Suddenly Your Hair is long! Almost didn't recognize you!😜

Yes yes yes but how much? 💰💰💰💰💰

Good $h*t!

@IRCTireUSAMoto

22 күн бұрын

🙌🙌

oops I was hoping you fix somehow actually the stock brakes :(

@IRCTireUSAMoto

22 күн бұрын

Couldn’t seem to find a fix!

@WASemiHardEnduro

22 күн бұрын

Pad swap makes a big difference. Might be enough to live with.

Where’s Roam?

@IRCTireUSAMoto

22 күн бұрын

He was at the truck! Too hot for him!!

@Trialstoenduro-vz8iq

22 күн бұрын

@@IRCTireUSAMoto Rich someday I’ll see you both in person. Meanwhile thanks for the knowledge you share with the community. Njato’s from Madagascar.

Beta has best brakes right out the box.

@onthethrottle7104

6 күн бұрын

The KTM Brembo brakes are much better than my Beta Nissin brakes, OMG there is no comparison

@darkodragic1963

5 күн бұрын

@@onthethrottle7104 for me is the opposite, OMG there is no comparison

It's criminal to have to do this on a $12.5k bike.

Not hating but the new tpi, tbi bikes sounds horrible

Little disappointed.. I read the title and though you were going to do some changes/ upgrades to the existing brakes ie pads, fluid change, SS lines etc.. "making the worst, the best' not "replacing with the best".. I'd be bummed if I spent $10K on a Brand New bike, then had to add another $1000 just to get the brakes to work :(

@IRCTireUSAMoto

22 күн бұрын

Haha! Thats very true! Should have named it “replacing”. It’s really tough to come up with names when you put out a video every week!!

Can you explain why you like 12 48 or 50 for race purpose Watch all your videos practice what you say seen big improvements in my writing

KTM moved production to China and now the components suck. They need to go back to Brembo.

@lacemi

21 күн бұрын

Braketec IS spanish not chinese

@onthethrottle7104

6 күн бұрын

Another keyboard internet lame attempt to make a good point. When it comes to KTM and China, KTM is only moving assembly production of one street bike, not any of it's dirt bikes.. Also, Braktec is not china. And last, the KTM group provides different choices on their bikes so people don't have the exact same set up on every model. Regardless KTM looks to go back to Brembo on Husky in 2025, a lot of non pro Husky's for 2023 did come with Brembo. And last, all KTM models are already Brembo equipped.