Let's go brandon....i agree!

@rosstheoliverman

Жыл бұрын

🤣🤣🤣

A grinder and paint makes me the welder I ain't !

@rosstheoliverman

Жыл бұрын

🤣🤣🤣

@paulcrawford8425

Жыл бұрын

@@rosstheoliverman ❤🤣

He says "got my tape measure here" I look up at the TV and he's holding it in a big wad. 😂 That hit me as very funny, almost fell out of my chair laughing.

@rosstheoliverman

Жыл бұрын

🤣🤣🤣

Your custom made tools are just what you need for your needs and added bonus laughs along the way,thanks

@rosstheoliverman

Жыл бұрын

🤣 thanks Doug!

More Minnie Mo, Minnie MO, I love that Combine

@rosstheoliverman

Жыл бұрын

I’ll try to get back to that project soon. Thanks Dave!

Iam in the shop today welding on a bat wing mower, that caught a stump n fence his boy told me it was vibration also , I bet it's missing one of the knife cutter bars has boy tell me I think I might know where it is lol . So we ordered parts and they got here this morning. His boy got here early ask me why I didn't have the doors open , I just smiled then we went in the shop and it was about 20 degrees cooler in there , he looked at me and it's like a meat locker in here . I just laughed n told him that's why I keep it closed up 74 inside 94 out . I told him there do for a new mower and he agreed. I bet you drag works alot better now , waiting on the video n buddy action . I never will regret building this shop , From turkey creek farms be safe n thankful

@rosstheoliverman

Жыл бұрын

Cool 😎 Thanks Earl!

Nice farm welding 😊

@rosstheoliverman

Жыл бұрын

Thanks Richard!

A couple short pieces of round rod on both sides welded to the smaller tube would let you slide them on and off without much trouble.

@rosstheoliverman

Жыл бұрын

I thought about doing something like that where I could just set them down on top of it, but I came up with another solution you’ll see in a future video

Looks good Ross.

@rosstheoliverman

Жыл бұрын

Thanks!

I was dying laughing over your tape measure 😂. Never throw nothin away. I think your welds look pretty good, don’t know what that says about my welding.

@rosstheoliverman

Жыл бұрын

🤣🤣🤣

The tape measure was the best part! 😂😂

@rosstheoliverman

Жыл бұрын

🤣🤣🤣

I wish we could get some of your rain,we are very dry here in western Illinois

@rosstheoliverman

Жыл бұрын

Hopefully it will rain there soon!!

Looking good, the landplane that is not your ass!! Best weld I've seen made all day if I'm being honest.

@rosstheoliverman

Жыл бұрын

Thanks Derek!

Gives measure twice a bad name - thanks for sharing

@rosstheoliverman

Жыл бұрын

🤣 thanks for watching!!

The welding and the color look pretty darn good to me But I can't wonder on a hot day when you are welding what Chris Losey was doing lol

@rosstheoliverman

Жыл бұрын

🤣 Thanks John!

You made a pretty fair job of that welding Ross . Could not see much wrong with it !

@rosstheoliverman

Жыл бұрын

Thanks!!

Nice mod too the plane, a tool that's not used all the time but handy as hell when you need it. You could weld a couple long bolts or some round stock to your frame that would line up with the holes on your weights and just set them on.

@rosstheoliverman

Жыл бұрын

I thought of doing something like that but I came up with a different idea you’ll see in another video. Thanks for watching!!!

You alt to send you a hitch receiver on there too, so you can move trailers around if you’ve got a hook up

@rosstheoliverman

Жыл бұрын

I have a hitch that I’ve made for the tractors to do that. I don’t wanna put any more strain on this thing than necessary, it was super expensive 🤣

Another great video Ross. Your welding looks good to me. As long as it holds together, that's what it's all about. Great job.

@rosstheoliverman

Жыл бұрын

Thanks Keith!

Need to install shanks / ripper teeth on the front bar. It will do a way better job.

@rosstheoliverman

Жыл бұрын

I wish I had bought the woods brand one because they have ripper shanks on them from the factory. Oh well..

You should have used that Chinaesum DeWalt and removed the paint and mill scale before you welded the project. Welding is 90% prep and 10% welding.

@rosstheoliverman

Жыл бұрын

I did do some of that off camera. That’s why it magically appeared in one of the shots. Thanks Gary!

@bigun447

Жыл бұрын

@@rosstheoliverman As the Keebler Elves say "Magically Delicious" Hope the fair is going well. We sent you some more Wabash River water. Those storms seem to blow up out of nowhere just as they get into Indiana.

@ThatOliverGuyChris

Жыл бұрын

@@bigun447 Lucky Charms is Magically Delicious.

You did a nice job, Ross. That thing looks factory! 👍👍👍👍

@rosstheoliverman

Жыл бұрын

Thanks Charlie! see, my teachers were wrong. Failing math didn’t affect me the rest of my life 🤣

welding is an art; its worth is in the eye of the beholder. :) and it looks good to me.

@rosstheoliverman

Жыл бұрын

Thanks!!!

Extra weight ought to be beneficial to the performance of the landplane. Don't have anything that fancy...just use a back blade.

@rosstheoliverman

Жыл бұрын

Thanks Don! I never would’ve believed that this thing worked but it sure does a great job.

hey ross they make a hammer so u dont have to use a bar lol lol

@rosstheoliverman

Жыл бұрын

🤣🤣🤣

Your welding is better than mine

@rosstheoliverman

Жыл бұрын

Thanks!!

You definitely didn’t hurt the thing adding that to it, some of that Frontier stuff is light, I sold a lot of it back in the day.

@rosstheoliverman

Жыл бұрын

I think it should work great!

👍👍👍👍🍺🍺🍺🍺

@rosstheoliverman

Жыл бұрын

Thanks Paul!

I have the same plane i put a couple pieces of angle on mine and i hang suite case weights on it. The one i built is made out of old 1934 railroad track so its HEAVY and seems to work way better . See

@rosstheoliverman

Жыл бұрын

Cool! That’s good to know that my idea isn’t for nothing.

Very good job welding.

@rosstheoliverman

Жыл бұрын

Thank you!

I have an 8 ft Land Pride land plane, I don't have the issue of it bouncing, in fact, quite the opposite. Mine will bury itself in gravel if not careful. What I've found is, go slow and you will make many trips back and forth with this tool. It's designed to loosen hard packed gravel and with mine, I'm able to fill in pot holes. Now, what some may not understand with these land planes, both of those blades need to sit "even" or close to it in order to work properly. Great video as always. Cheers :)

@rosstheoliverman

Жыл бұрын

Thanks!!

Welding looking good to me and I used to weld for a living. Hope it all works out for you. See you soon.

@rosstheoliverman

Жыл бұрын

Thanks Jonathan!

You must be tough , I would burn my arms welding in short sleeve.

@rosstheoliverman

Жыл бұрын

🤣 Just used to it I guess

Fine job

@rosstheoliverman

Жыл бұрын

Thanks Jason!

Great job Ross, I think you will like that implement a lot more with some weight added to it. I have always thought those things were made too lite for doing a good job in packed gravel.

@rosstheoliverman

Жыл бұрын

It seems to be better. Video should be out later this week!

Ross your welding looks pretty good to me. Hopefully when you get that all put together the way you wanted to work like you're imagining and it will. Thanks Michael

@rosstheoliverman

Жыл бұрын

Thanks Michael!!

I have seen a video of you using this implement and you had to make several passes with it. Your idea should make a big difference. Welds look fine. I’m not a professional but youngest grandson is. 👍👍

@rosstheoliverman

Жыл бұрын

Thank you Tom!!!

Looks good to me even if it didn't I can't see it from West Virginia lol

@rosstheoliverman

Жыл бұрын

🤣 thanks!!

If you had to run another brand tractor what would it be?? Like a ford or Deere or what?

@rosstheoliverman

Жыл бұрын

It would’ve probably ended up being Deere. That’s really the only other thing I have a connection too.