Making my own virtual pinball machine - Part 2 - Inside hardware and working tables!
Автокөліктер мен көлік құралдары
Links to all the stuff I used to make this:
Power strip - amzn.to/3b4RwpP
Audio cables - amzn.to/3IW8weA
USB ports: amzn.to/3RUh1uD
7.1 Surround sound amp - amzn.to/3Ps2HYL
SSF speakers - amzn.to/3IWnjFW
SSF Amps - amzn.to/3PIflCy
Terminal block - amzn.to/3omWgKB
Temp control board - amzn.to/3J5tOGD
Fans - amzn.to/3vc8UzR
My IG page: / maxharvard
Check out the 3 books I've written!
4L80E Rebuilds - amzn.to/3hVsjOS
LT1 Performance book: amzn.to/2Fuip2n
LS Swap book: amzn.to/2BPv0NJ
Пікірлер: 37
Looks great! Just finishing up the cabinetry on mine. Fun as hell project, lots of things to focus on!
@GearheadDaily
2 жыл бұрын
Absolutely! I'm a cabinet maker, so that part was easy, the computer part... not so much LOL
Great work im going to build my own soon but with limited space so will be either 32 inch monitor with 27 inch back glass and i have a 24 inch Monitor already for the dmd and video
Looks great nice job man :)
@GearheadDaily
Жыл бұрын
Thanks! :)
Great work. Looks like your pinball machine is moving right along. It looks great man. I should post a video of my build. It's so fun to put together such a project isn't it?
@GearheadDaily
Жыл бұрын
Sure is! I'm working on glass and artwork now.
Great work. Need to get working on mine again soon. What monitor is that?
@joewozniak2231
Жыл бұрын
Never mind saw it’s a tcl
@GearheadDaily
Жыл бұрын
@@joewozniak2231 all good, it was a budget TCL. but still 4k UHD
Where do you get the software to run the tables on your build?
@GearheadDaily
Жыл бұрын
look up pinuppopper
Awesome video. You did an awesome job. You mentioned it runs in 4k. Do you mind me asking what cpu and gpu did you use? Also, what type of TV did you use for the main table? Any light you could provide would be greatly appreciated.
@GearheadDaily
Жыл бұрын
I don't remember the CPU, I7 i believe, but the gpu was a 980ti. The TV was a TCL 4k TV from walmart. My newest build has 4k 120hz and a 3070
@stuartsherman5975
Жыл бұрын
@@GearheadDaily Awesome! Can't wait to see your new build.
@GearheadDaily
Жыл бұрын
@@stuartsherman5975 Thanks, i'm about to make a walk around of it later today :)
Which software do you use to switch between tables, the selection overlay?
@GearheadDaily
Жыл бұрын
pinup popper
hello and congratulations. Do you have a project from which you can obtain the measurements of the furniture? Thank you
@GearheadDaily
4 ай бұрын
Yes, check out Mjrnet's guide. works great
@nicolapontillo2029
4 ай бұрын
@@GearheadDaily thanks for the quick reply. But where can I find the Mjrnet guide?
@GearheadDaily
4 ай бұрын
@@nicolapontillo2029 Google? mjrnet.org/pinscape/
Did you build this yourself? I saw part one of it being built. If so, do you build for others? I want to get a custom wide body Vpin but not sure where to go about it. Thanks.
@GearheadDaily
Жыл бұрын
I did yes and i'm building a second right now. I will make them for people near me.
@ProJecT335i
Жыл бұрын
@@GearheadDaily Awesome. Not sure where you’re located but I’m in TX. I’ll pay shipping. Lol 🤣. Love your work. It’s amazing
@GearheadDaily
Жыл бұрын
@@ProJecT335i lol thanks, but i try not to ship stuff. Once it leaves my shop i don't want to have to do customer service LOL I'm in MN btw.
How did you do the tables .I have vp9 full-screen tables and back glass .I tried vpx tables bit had no luck. Nice table
@GearheadDaily
11 ай бұрын
baller installer helps a lot, but yes all of these are VPX10
Hi. What size monitor?? And for the backbox?
@GearheadDaily
2 ай бұрын
I can't remember, but 43" works fine, back box is 32"
Would Windows 11 run the software without issues?
@GearheadDaily
2 ай бұрын
I've heard that it works fine, but some have issues. I'm keeping 10 for now
@RearviewMirror-ij2pr
2 ай бұрын
@@GearheadDaily Ok, thanks.
Where have you been?
@GearheadDaily
2 жыл бұрын
Hey bud! recently i took a new job and haven't had a lot of time for much else really. Now that I'm getting the hang of the new gig I can breath a little bit and have some fun :)
@guitarobot
2 жыл бұрын
@@GearheadDaily Happy to have you back. Nice machine by the way.
@GearheadDaily
2 жыл бұрын
@@guitarobot Thank you sir! I've got lots going on, just haven't posted anything about it! :D