In this video, I have explained step by step method of making an M12 Nut and Bolt in Fusion 360.
Жүктеу.....
Пікірлер: 40
@yigitalpdikmen6 ай бұрын
Thanks !
@AngusSuter4 жыл бұрын
Thanks! Very easy to understand tutorial! Was stuck on how to make the threads moulded and you explained it.
@cameronashcroft46328 ай бұрын
This tutorial is art.
@vince_oz4 жыл бұрын
Awesome video, instructions clear and a lot of tips shown, Thank you for that amazing work!
@amjadmaniar20103 жыл бұрын
Thank you. This was very clearly presented and extremely useful!
@Motorboot-Hoedan3 жыл бұрын
I learned a lot from this video, not only making a bolt and a nut. Thanks !!!!
@markdheilong2 жыл бұрын
Great tutorial! Amazing demonstration and explanation. I definitely will practice this so I can become more proficient at Autodesk Fusion 360.
@deathlydarkness3 жыл бұрын
Thank you for the tutorial, it was really very fun to design with you. I had to pause a few times just because Fusion 360's UI has changed a lot, but the information is solid.
@MikeSVOR4 жыл бұрын
Perfect tutorial brother! Excellent Job! Very informative. Thank you.
@mciro4 жыл бұрын
Awesome, so clear, so easy to follow. Been here, done that.
@philippe53944 жыл бұрын
Yes, very interesting and informative. I begin to play with Threads and 3D printings. Thanks for sharing
@mlazzarotto4 жыл бұрын
Awesome tutorial, very well made, perfect english pronunciation. 10/10
@omkarkhade46024 жыл бұрын
Your way of teaching is nice.
@johnlytle3 жыл бұрын
Great tutorial, very well presented.
@wartyfrog57492 жыл бұрын
Thank you so much for the video tutorial! I just found out that one cannot print this directly, you have to add some offset to the threads, otherwise they won’t be able to go against each other in printed form.
@pawekardas22843 жыл бұрын
Thanks for a very good tutorial :)
@5hayansan4 жыл бұрын
Thanks for you Video explanation !!
@orlandomosquera47842 жыл бұрын
GREAT VIDEO, THANKS.
@cooperirwin44855 жыл бұрын
thank you Jaiprakash, very cool
@burratha3 жыл бұрын
Great tutorial
@NIBIRU893 жыл бұрын
GREAT!. WELL DONE
@ENGMESkandaSVaidya4 жыл бұрын
Ur voice is awesome
@shaileshgupta4506 Жыл бұрын
Hello Sir, Shailesh here, joined your course in Udemy, Fusion 360. Want to know about your course in Hindi. Do you have any videos in Hindi.
@XanderPants20002 жыл бұрын
thank you!
@amjedmohammed31015 жыл бұрын
you can move together a nut around bolt
@deonholt3 жыл бұрын
Thanks very much for this video. For some reason I am battling to properly design a socket/nut, M48 into which a vacuum hose with an OD of 48mm fits. Is designed the nut with an inner diameter of 48mm and added the thread for M48 BUT the pipe does not fit. Am I missing something or am I doing something wrong? Please advise.
@yuriynovomail
2 жыл бұрын
If you 3D print nut and bolt using this tutorial, most likely it will NOT work. You have to add some 0.2-0.3 mm more space by moving nut's internal surfaces of thread using OFFSET tool, after that it will work.
@leungwc10042 жыл бұрын
may i know if the printing can be separated? can i turn it?
@PawanKumar-fq6tb4 жыл бұрын
Awesome!! but Can you tell me that how to assemble nut and bolts with various parts??
@ENGMESkandaSVaidya4 жыл бұрын
Tnk u sir
@yugalsharma27733 жыл бұрын
at 2:47 circle is not snapping to vertex of polygon
@yugalsharma2773
3 жыл бұрын
i have latest version
@JumperplayHD
2 жыл бұрын
Same problem here, have you found a solution yet?
@rafaelmarques56233 жыл бұрын
Hello. I cant find a way to select just the circle (3:06), my fusion always split the drawing. Any tips ?
@narenjegan3675
3 жыл бұрын
press c button on fusion, or pick circle manually from the create drop down menu
@rafaelmarques5623
3 жыл бұрын
@@narenjegan3675 That wasn’t my question, but I found a solution meanwhile. Thanks though !
@Yuehanlad2 жыл бұрын
What you have created is a screw, not a bolt! A bolt has a flat, raised surface under the head to displace the load.
Пікірлер: 40
Thanks !
Thanks! Very easy to understand tutorial! Was stuck on how to make the threads moulded and you explained it.
This tutorial is art.
Awesome video, instructions clear and a lot of tips shown, Thank you for that amazing work!
Thank you. This was very clearly presented and extremely useful!
I learned a lot from this video, not only making a bolt and a nut. Thanks !!!!
Great tutorial! Amazing demonstration and explanation. I definitely will practice this so I can become more proficient at Autodesk Fusion 360.
Thank you for the tutorial, it was really very fun to design with you. I had to pause a few times just because Fusion 360's UI has changed a lot, but the information is solid.
Perfect tutorial brother! Excellent Job! Very informative. Thank you.
Awesome, so clear, so easy to follow. Been here, done that.
Yes, very interesting and informative. I begin to play with Threads and 3D printings. Thanks for sharing
Awesome tutorial, very well made, perfect english pronunciation. 10/10
Your way of teaching is nice.
Great tutorial, very well presented.
Thank you so much for the video tutorial! I just found out that one cannot print this directly, you have to add some offset to the threads, otherwise they won’t be able to go against each other in printed form.
Thanks for a very good tutorial :)
Thanks for you Video explanation !!
GREAT VIDEO, THANKS.
thank you Jaiprakash, very cool
Great tutorial
GREAT!. WELL DONE
Ur voice is awesome
Hello Sir, Shailesh here, joined your course in Udemy, Fusion 360. Want to know about your course in Hindi. Do you have any videos in Hindi.
thank you!
you can move together a nut around bolt
Thanks very much for this video. For some reason I am battling to properly design a socket/nut, M48 into which a vacuum hose with an OD of 48mm fits. Is designed the nut with an inner diameter of 48mm and added the thread for M48 BUT the pipe does not fit. Am I missing something or am I doing something wrong? Please advise.
@yuriynovomail
2 жыл бұрын
If you 3D print nut and bolt using this tutorial, most likely it will NOT work. You have to add some 0.2-0.3 mm more space by moving nut's internal surfaces of thread using OFFSET tool, after that it will work.
may i know if the printing can be separated? can i turn it?
Awesome!! but Can you tell me that how to assemble nut and bolts with various parts??
Tnk u sir
at 2:47 circle is not snapping to vertex of polygon
@yugalsharma2773
3 жыл бұрын
i have latest version
@JumperplayHD
2 жыл бұрын
Same problem here, have you found a solution yet?
Hello. I cant find a way to select just the circle (3:06), my fusion always split the drawing. Any tips ?
@narenjegan3675
3 жыл бұрын
press c button on fusion, or pick circle manually from the create drop down menu
@rafaelmarques5623
3 жыл бұрын
@@narenjegan3675 That wasn’t my question, but I found a solution meanwhile. Thanks though !
What you have created is a screw, not a bolt! A bolt has a flat, raised surface under the head to displace the load.
bolt
nut
nut