Making 190 g / 6.5 oz Epoxy Trolling Lure. The mold kit by Varna Fishing is available here: www.ebay.com/itm/185396601704
Жүктеу.....
Пікірлер: 51
@stephenkeefer34362 жыл бұрын
Awesome video! Great from start to finish. Thanks !
@johnsurf509 Жыл бұрын
Pretty good!!I been making them for 37 years!!
@swedishpowerclub2 жыл бұрын
Im from Sweden and just love your tutorials. Can you make one that show how you make your silicone molds.
@Mozzamen2 жыл бұрын
È un idea veramente eccezzionale... Gran bel lavoro!!!
@wendelldupre23922 жыл бұрын
How do you make your molds?
@ferjeouichaker10 ай бұрын
I've had other BPM baits kzread.infoUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 before and they've pretty much always came through for me with the suskie smallies here and even with the walleye and pike, but I realized I didn't have an "in-between" pattern so this junebug one fills that role in no problem. it pairs up magnificently with a junebug Zoom Z-craw Jr that was trimmed a couple millimeters before the hook slots and rigged sideways for that fatter panfish side profile while still being a nice'n'compact presentation, a real power-finesse bait. Hell, it was so pretty I even bothered to fotosketch the pic into a watercolor painting image just to show you it's beauty! Even the blades are really well made, sure, they're not of Hildebrandt-level exquisiteness but look at the bead's reflection on the colorado blade, definitely well-made! The only "problem" spot it had was a bald spot in the skirt but it was nothing that I couldn't easily fix with a but of tuggin'n'shiftin' with the strands for a couple of seconds, besides that it is pretty minty!
@oguzhanyucel73552 жыл бұрын
Bu işi en iyi sen yapıyorsun. Kurşun eritirken mutlaka açık havada yapmalısın. Gaz maskesi kullan ve havalandırma çok önemli. Buna dikkat et.
@maklin850210 ай бұрын
У Вас золотые руки !!
@ivoshkarov35722 жыл бұрын
Супер са станали!
@rafaaljarilla47562 жыл бұрын
Son una pasada esos señuelos ,Enhorabuena buen trabajo
@FishingVarna
2 жыл бұрын
Thank you
@sonakmalelatv2 жыл бұрын
Mantap nih bentuknya kawanku
@kras-craft-lures2 жыл бұрын
Браво
@kelstondesilva5893 Жыл бұрын
What kind of metal tubing are you using and how big is it
@ryanredihan59 Жыл бұрын
Can you make a list of everything used in this video? Thank you I loved it!
@FishingVarna
Жыл бұрын
This the mold kit that you need: www.ebay.com/itm/185396601704 The rest you need is spray release agent for the resin mold; talcum powder for the lead mold; epoxy resin. That's all.
@fluketankerii9398 Жыл бұрын
What are the red materials used to make blocks?
@julesmelgaard8139 Жыл бұрын
What is the name of the resin you are using?
@williangomez1075 Жыл бұрын
Donde compro el molde??
@lannabulls Жыл бұрын
Nice job, thanks? What about the Red mold were you cast lead, which kind of silicon do you use, "normal", High temp? Thanks so much
@FishingVarna
Жыл бұрын
It is special high temperature silicone for lead, It is this one: www.ebay.com/itm/184705433954
@Reelhooked Жыл бұрын
What type of high heat silicone are you using for the lead mold? Any I find are not good for lead and it’s 560* melting point, only up to 450*. Great video, very thorough! Thank you!
@FishingVarna
Жыл бұрын
This is the Silicone, it is resistant to temperature 752 F / 400 C : www.ebay.com/itm/184705433954
@Reelhooked
Жыл бұрын
@@FishingVarna Thank you for the quick reply and product information, I appreciate it!
@MorchfishingNJ2 жыл бұрын
Great job 👏🏼, that lures is for tuna fish????
@FishingVarna
2 жыл бұрын
Tuna, dorado, marlin
@Officerdoofey8089 ай бұрын
What size tube/pipe fits the mold?
@semihsemra86122 жыл бұрын
👍👍💖💖🐠🐠
@geraldsmith71262 жыл бұрын
Why are you using high temperature silastic mold material for pouring resin?
@FishingVarna
2 жыл бұрын
Because you can use it for both resin and lead. Sometimes you need a heavy head made entirely of lead. One mold does it all.
@franklinalvarez3516 Жыл бұрын
Dónde puedo conseguir los moldes y los materiales para hacer estos señuelos de arrastre Gracias
@FishingVarna
Жыл бұрын
Available here: www.ebay.com/itm/185396601704 www.ebay.com/itm/185596622633
@fishermanspratfishfilletfe31338 ай бұрын
Can you buy those moulds or did you make them?
@FishingVarna
8 ай бұрын
You can buy these molds here: www.ebay.com/itm/185396601704
@Parker-11 Жыл бұрын
How long are the heads
@FishingVarna
Жыл бұрын
3 inch
@ferhatkrman1697 Жыл бұрын
selam kauçuk kalıp nasıl yapılıyor paylaşırmısınız kanalda
@yaimbenjo Жыл бұрын
thought I accidentally had a My Self Reliance video on in the background xD
@lilcutter1100 Жыл бұрын
Where can I buy this as a kit?
@FishingVarna
Жыл бұрын
www.ebay.com/itm/185396601704
@fetuaopoleka85168 ай бұрын
Pls what the name the metal to make a hole pls
@FishingVarna
8 ай бұрын
It is aluminum wire
@itbarmoana2971 Жыл бұрын
,ilike ur molds how much? Fro Palawan Phill
@FishingVarna
Жыл бұрын
www.ebay.com/itm/185396601704
@AceTheBathoundProductions Жыл бұрын
I bet that's for marlin if not for tuna or Dorado...
@FishingVarna
Жыл бұрын
Your bet is right. Here is the listing for these molds: www.ebay.com/itm/185396601704
@Officerdoofey8089 ай бұрын
What is the recipe for the epoxy resin? 2 parts epoxy resin, then what?
@FishingVarna
9 ай бұрын
Nothing else to it really. Just mix the two parts, get rid of the bubbles and pour. Don't forget to apply release agent in the mold beforehand.
@Officerdoofey808
9 ай бұрын
Two parts resin and one part hardening/glue?
@FishingVarna
9 ай бұрын
That depends on the epoxy you use. The instructions on the packing should say it all. @@Officerdoofey808
Пікірлер: 51
Awesome video! Great from start to finish. Thanks !
Pretty good!!I been making them for 37 years!!
Im from Sweden and just love your tutorials. Can you make one that show how you make your silicone molds.
È un idea veramente eccezzionale... Gran bel lavoro!!!
How do you make your molds?
I've had other BPM baits kzread.infoUgkxCbNOWAGmn6nfbCbJDmasvBq7J38KZNw2 before and they've pretty much always came through for me with the suskie smallies here and even with the walleye and pike, but I realized I didn't have an "in-between" pattern so this junebug one fills that role in no problem. it pairs up magnificently with a junebug Zoom Z-craw Jr that was trimmed a couple millimeters before the hook slots and rigged sideways for that fatter panfish side profile while still being a nice'n'compact presentation, a real power-finesse bait. Hell, it was so pretty I even bothered to fotosketch the pic into a watercolor painting image just to show you it's beauty! Even the blades are really well made, sure, they're not of Hildebrandt-level exquisiteness but look at the bead's reflection on the colorado blade, definitely well-made! The only "problem" spot it had was a bald spot in the skirt but it was nothing that I couldn't easily fix with a but of tuggin'n'shiftin' with the strands for a couple of seconds, besides that it is pretty minty!
Bu işi en iyi sen yapıyorsun. Kurşun eritirken mutlaka açık havada yapmalısın. Gaz maskesi kullan ve havalandırma çok önemli. Buna dikkat et.
У Вас золотые руки !!
Супер са станали!
Son una pasada esos señuelos ,Enhorabuena buen trabajo
@FishingVarna
2 жыл бұрын
Thank you
Mantap nih bentuknya kawanku
Браво
What kind of metal tubing are you using and how big is it
Can you make a list of everything used in this video? Thank you I loved it!
@FishingVarna
Жыл бұрын
This the mold kit that you need: www.ebay.com/itm/185396601704 The rest you need is spray release agent for the resin mold; talcum powder for the lead mold; epoxy resin. That's all.
What are the red materials used to make blocks?
What is the name of the resin you are using?
Donde compro el molde??
Nice job, thanks? What about the Red mold were you cast lead, which kind of silicon do you use, "normal", High temp? Thanks so much
@FishingVarna
Жыл бұрын
It is special high temperature silicone for lead, It is this one: www.ebay.com/itm/184705433954
What type of high heat silicone are you using for the lead mold? Any I find are not good for lead and it’s 560* melting point, only up to 450*. Great video, very thorough! Thank you!
@FishingVarna
Жыл бұрын
This is the Silicone, it is resistant to temperature 752 F / 400 C : www.ebay.com/itm/184705433954
@Reelhooked
Жыл бұрын
@@FishingVarna Thank you for the quick reply and product information, I appreciate it!
Great job 👏🏼, that lures is for tuna fish????
@FishingVarna
2 жыл бұрын
Tuna, dorado, marlin
What size tube/pipe fits the mold?
👍👍💖💖🐠🐠
Why are you using high temperature silastic mold material for pouring resin?
@FishingVarna
2 жыл бұрын
Because you can use it for both resin and lead. Sometimes you need a heavy head made entirely of lead. One mold does it all.
Dónde puedo conseguir los moldes y los materiales para hacer estos señuelos de arrastre Gracias
@FishingVarna
Жыл бұрын
Available here: www.ebay.com/itm/185396601704 www.ebay.com/itm/185596622633
Can you buy those moulds or did you make them?
@FishingVarna
8 ай бұрын
You can buy these molds here: www.ebay.com/itm/185396601704
How long are the heads
@FishingVarna
Жыл бұрын
3 inch
selam kauçuk kalıp nasıl yapılıyor paylaşırmısınız kanalda
thought I accidentally had a My Self Reliance video on in the background xD
Where can I buy this as a kit?
@FishingVarna
Жыл бұрын
www.ebay.com/itm/185396601704
Pls what the name the metal to make a hole pls
@FishingVarna
8 ай бұрын
It is aluminum wire
,ilike ur molds how much? Fro Palawan Phill
@FishingVarna
Жыл бұрын
www.ebay.com/itm/185396601704
I bet that's for marlin if not for tuna or Dorado...
@FishingVarna
Жыл бұрын
Your bet is right. Here is the listing for these molds: www.ebay.com/itm/185396601704
What is the recipe for the epoxy resin? 2 parts epoxy resin, then what?
@FishingVarna
9 ай бұрын
Nothing else to it really. Just mix the two parts, get rid of the bubbles and pour. Don't forget to apply release agent in the mold beforehand.
@Officerdoofey808
9 ай бұрын
Two parts resin and one part hardening/glue?
@FishingVarna
9 ай бұрын
That depends on the epoxy you use. The instructions on the packing should say it all. @@Officerdoofey808
Good video, music is nauseating.