Making Inserts for the Festool Sys Mini 3
Тәжірибелік нұсқаулар және стиль
I visited my local Axminster store recently and could not resist buying a Sys Mini 1 and a Sys Mini 3. The smaller Sys Mini 1 will be used as a general purpose tool carrier. In this video I describe how to make some tray inserts for the Sys Mini 3 which can also be used with the Sys Mini 1.
Пікірлер: 70
Thanks for sharing. I’m glad to hear that I’m not the only one guilty of purchasing something, then trying to find a need for it. Or in this case seeing a neat project and finding an excuse to buy another mini systainer!
@NewBritWorkshop
5 жыл бұрын
Hi Gary, I may buy another as the trays turn the Sys Mini 3 into an excellent storage box. Cheers. Peter
Great demo of clamping different configurations!
This is brilliant! Very happy to find great UK woodworking channel. I will get into these, but this far videos look superior! Thank you beyond words and you got a subscriber!
@NewBritWorkshop
5 жыл бұрын
Thank you so much and welcome to The New Brit Workshop. Cheers. Peter
My friend always good learning with you , i love your vídeos , one better than the other , thank you .
@NewBritWorkshop
5 жыл бұрын
Hi Marcos, Many thanks. Peter
Another very helpful vid Peter, thank you.
@NewBritWorkshop
5 жыл бұрын
Cheers. Peter
Love your work. Great video again
@NewBritWorkshop
2 жыл бұрын
Thank you! Cheers!
Another excellent video. Thanks Peter
@NewBritWorkshop
5 жыл бұрын
Cheers. Peter
Love it! I have a Sys Mini One. I bought it to .... well look at......couldn't resist lol Now to find a use for it!
@NewBritWorkshop
5 жыл бұрын
Great. Peter
Peter, Thankyou for an excellent video and all the measurements . Just bought a couple of these mini systainers !. I have no excuse now
@NewBritWorkshop
5 жыл бұрын
Hi John, I think that they are brilliant. Cheers. Peter
@johnbarlow6546
5 жыл бұрын
New Brit Workshop hi Peter - just noticed that you are at Harrogate show this week. Will be there Friday - hope to be able to see you there
@NewBritWorkshop
5 жыл бұрын
Hi John, yes come and say hello. I am there every day of the show. Peter
@johnbarlow6546
5 жыл бұрын
New Brit Workshop will do Peter
@johnbarlow6546
5 жыл бұрын
Peter, great to meet you at Harrogate on Friday. Many thanks for your advice I ordered the Kapex 60 mitre saw and the CXS drill driver. I also picked up the last two assembly squares that Axminster had at the show. Keep up with your excellent range of videos. I found them very informative and they kept me encouraged when illness kept me out of the workshop earlier in the year. Regards
Brilliant ! Great video 👍
@NewBritWorkshop
2 жыл бұрын
Hi John, Many thanks. Peter
Just got a couple of these sys3 minis for drill bits etc. and will make some of these trays out of MDF slightly customised to suit.
Now this is funny. I was watching your video on the tool to remove dogs when I thought about asking what you do to store all your dogs. Now I know :-) Thanks.
@NewBritWorkshop
5 жыл бұрын
Hi Jim, I think that my Sys Mini 3 should be called my "Kennel" !! Peter
Nice work Peter. Think I'll have to have a go at this in the quest for more organisation!
@NewBritWorkshop
5 жыл бұрын
Hi Darrel, I have had many years of an untidy workshop and I am slowly getting to grips with it all. Cheers. Peter
@ronh9384
5 жыл бұрын
New Brit Workshop I am working on untidy shopitis as well! It is a work in progress.....
@ronh9384
5 жыл бұрын
😊
Thanks Peter for sharing. I am wondering what the small overlap is good for when glueing.
@NewBritWorkshop
5 жыл бұрын
Hi Axel, When the pieces are moved from a straight line to the square the masking tape can sretch slightly and the 0.5 mm overlap (ish) allows for that. Peter
Peter, I greatly enjoy watching your very informative videos. I apologise if you’ve answered this in a previous video, but when cutting the mitered joints is there a particular reason you’ve tilted your Kapex to the side, instead of rotating it around the vertical axis?
@NewBritWorkshop
5 жыл бұрын
It is far more accurate that way as the wood is more stable and easier to hold. Peter
Brilliant
@NewBritWorkshop
Жыл бұрын
Hi James, Many thanks. Peter
Love it Peter, Great idea 💡 I’m going to copy exactly what you’ve done here - hope you don’t mind 😜👌🏼
@NewBritWorkshop
5 жыл бұрын
Hi Gary, That is why I do this - you have all the information you need in the video. Peter
@resultcarpentry5869
5 жыл бұрын
New Brit Workshop 👌🏼😊
Excellent video Peter. In this vid you use an "assembly square". I am very interested how this is build and what functionallity all the holes have. I cannot find a vid about this. Do you produce one? Dietmar
@NewBritWorkshop
5 жыл бұрын
Hi Dietmar, The UJK Assembly Square is available from Axminster - www.axminster.co.uk/ujk-technology-assembly-square-105280 or product code 105280. I will be making a video about it and some other Parf products in the not too distant future. The various holes and slots give you loads of clamping and positioning options. Peter
Another informative video. Will be copying the masking tape technique. Thank you. US prices for Systainers seem to be double those in UK. The SysMini 3 you showed for 15 Euros is priced at 34 USD at Woodcraft, which is 30 Euros this week. Wish it were otherwise.
@NewBritWorkshop
5 жыл бұрын
Gosh, those prices are awful but the same happens the other way around. Peter
Hi Peter, I love watching your videos and like you, also 'needed' to buy one of those mini sys 3 boxes from Axminster. What wood do you use for the insert trays please?
@NewBritWorkshop
5 жыл бұрын
Hi Daniel, I had some odd ends of ash and sycamore and cannot remember which I used - I have not been across to the workshop yet ! Peter
I recently purchased the mini 3 I'm going to line it with foam, drill some sound holes and use it to keep my blue tooth speaker and smart phone protected
@NewBritWorkshop
5 жыл бұрын
Hi Billy, That is an excellent idea. Cheers. Peter
Hello, thanks for the film, one question please . What are the small Kapex side extensions called ? They look handy. Stu
@NewBritWorkshop
5 жыл бұрын
Hi Stu, They are Crown Stops (494369). Cheers. Peter
Another great video peter, i have been looking at the mini systainers and this has convinced me to get some. I am curious though, your ks60 has a clamp on the left that looks like some kind of festool push down clamp to hold timber. Is that an official festool product and do you recall what it is called? It looks live a great alternative to the screw down basic clamps. Thanks
@NewBritWorkshop
8 ай бұрын
Hi James, It came from Bessey but there are similar ones on the market. Bessey quality is superb of course. Peter
Great video Peter, just what I've been looking for thank you.Spot on.what material did you use?
@NewBritWorkshop
5 жыл бұрын
Hi Bob, The sides are solid sycamore and the bases are all 1/4" veneered MDF (left over from the chests of drawers not so long ago). Many thanks. Peter
Great stuff. Thank you! I have 6 of those rascally boxes and now a new project; 6 new projects. Were you in Austin Powers? 😂
All you need now is some right angle Parf Dogs! What Is the UJK Right Angle guide made of? This is the perfect way to store the dogs. May have to take the plunge on these for my dogs... Do you have any concerns about dog damage due to rolling around in the box? I was thinking I might put kaizen foam in the inserts to prevent them rolling around. Are you on any social media or email yet since KZread took away the private message function? Thanks Peter. Good video!
@NewBritWorkshop
5 жыл бұрын
Hi Ron, The dogs are made of stainless steel and will come to no harm at all. KZread did away with Private Messaging in July. Just post a comment with you email address in t. 99% of the time this will get picked up by the KZread spam system and not be visible to the public. I can then react to it and then delete it. I am away from today, without my computer, and will not be back until next Tuesday as I am at the Harrogate Show. Peter
@ronh9384
5 жыл бұрын
New Brit Workshop Ok thanks Peter. On all the above. 😊 Ron
Nice video Peter, what kind of wood did you use and how thick were they....love your videos.......Cheers
@NewBritWorkshop
2 жыл бұрын
Hi Danny, The wood is either Ash, Poplar or Tulip but anything will do - the sides are 8 mm thick. Cheers. Peter
I was thinking, it would be nice to cut a load of dados then you could move the dividers about? Similar to the Festool-made containers :)
@NewBritWorkshop
5 жыл бұрын
Go for it. Peter
That Sys mini 1 fits inside the wooden insert that Festool sell for the 5
Peter, have they discontinued the Sys Mini 3??
@NewBritWorkshop
3 жыл бұрын
It looks as though they have. I have looked at both Festool UK and the Tanos German web sites and could not find them. Try a few dealers who may still have some old stock. Peter
@olivepressdesign
3 жыл бұрын
@@NewBritWorkshop Thanks Peter. I wonder why....
First
@NewBritWorkshop
5 жыл бұрын
Bravo ! Peter
@JW-mx3qg
5 жыл бұрын
Greatly enjoyed the video! Thank you for sharing.