Making Ceramic Handles With A Handheld Clay Extruder - No Pulling Needed
Marie Demonstrates how to Make Handles with a Handheld Clay Extruder. Tools, Supplies, and Links Are Listed Down Below in the 👇 SHOW MORE SECTION 👇
-------------------------------------------------------------------------------------------------------------------------------------------------------
❓ Question
If You Have any Questions, Comments, Feel Free to Post them in the Comments Section.
If You Have an Idea for A Video, Or If You Have Any Tips to Improve the Channel
Let Me Know Here: forms.office.com/r/FKmSzEzG8p
Don't forget to 👍 and Subscribe! Turn on Notifications (🔔)
-------------------------------------------------------------------------------------------------------------------------------------------------------
🎯 Disclosure:
Some of these links go to my website potterycrafters.com and some are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you.
🎯 As an Amazon Associate, I earn from qualifying purchases.
-------------------------------------------------------------------------------------------------------------------------------------------------------
🔷 Bonus Material 🔷
👉 Watch - Attaching Handles to Mugs in 5 easy Steps
kzread.info/dash/bejne/mIiArMiLcrO2g5s.html
👉 Watch - 8 New Handheld Clay Extruder Handle Designs - Handles for Mugs
potterycrafters.com/
👉 Watch - Handheld Clay Extruders Review - The Nidec vs The Scott Creek
kzread.info/dash/bejne/enxto9x9iqinfKQ.html
👉 Visit Pottery Crafters
potterycrafters.com
-------------------------------------------------------------------------------------------------------------------------------------------------------
My Pottery Wheel
✅ Brent CXC
geni.us/VFbap (Amazon) (Blick)
My Kiln
✅ Skutt KM Series 818-3
geni.us/GCrzBDK (Blick)
-------------------------------------------------------------------------------------------------------------------------------------------------------
🔷 Tools In My Studio 🔷
Hand Tools
potterycrafters.com/recommended-tools-hand-tools/
Glazes
potterycrafters.com/recommended-tools-best-glazes/
Brushes
potterycrafters.com/recommended-tools-best-glaze-brushes/
Favorite Clays
potterycrafters.com/pottery-clay/
-------------------------------------------------------------------------------------------------------------------------------------------------------
MUSIC TRACKS:
Sunny Island by Scandinavianz
soundcloud.com/scandinavianz
Music provided by Free Music for Vlogs
kzread.info/dash/bejne/opdqt4-Bc7W8o8Y.html
Sponsored videos and brand-sponsored content on this channel will be clearly disclosed within the videos and/or descriptions.
Пікірлер: 55
⚡️What questions do you have about Making Pottery? Let me know! 👇 If you are struggling with technique, dont be shy. Let me know I may make a video helping you solve your problem. Need help Centering your Clay check this video out. kzread.info/dash/bejne/eX-Hl6mCkpXQaJc.html More Beginner Pottery Wheel Projects Here kzread.info/dash/bejne/X3eTkpuIc9TYeJc.html
@jeanaactkinson4302
4 жыл бұрын
How do you clean the extruder if you need to?
@PotteryCrafters
4 жыл бұрын
Good Question Jeana. 😀You can clean it before or after you use it. The dry clay easily wipes off with a damp sponge. I use my Extruder a lot and have never had to clean the tube. Clay does not stick in the tube. I guess if it would I would push a damp sponge through until clean. 😊
You are the Bob Ross of pottery
@PotteryCrafters
3 жыл бұрын
Thank you 😍
My goodness this is awesome. I oftentimes wonder how anyone could deal with the tedium of "slamming carrots" over and over again but wow what a time saver this will be! Thanks Marie for sharing!
@PotteryCrafters
3 жыл бұрын
Cool. Glad it helps 😃 This one may help give you ideas for different types of handles you can create kzread.info/dash/bejne/aaqTrKSKocfKerA.html 😊
Thank you so much for this vido. I had been looking for hints on how to make dies for my clay gun and learned in your video that I can buy ready made ones. I have already ordered them! For so many years I said that in the time I make a handle I can make another pot. Lately I made more mugs and pulled more handles than I wanted to, those days are over now. Hurrah!
@PotteryCrafters
4 жыл бұрын
Thank you Kyra. I'm so glad you found the video useful. An extruder is definitely the way to go if you want to make easy consistent handles. handles. Stay tuned a new video will be released later today.
Thanks Marie, just got an extruder for Christmas. I'm so happy to find your video on using them, very helpful as usual
@PotteryCrafters
2 жыл бұрын
You are so welcome Dee Dee. That's wonderful 😍
That is such a cool tool; I love the "braided" handles, so beautiful. Great job and I look forward to your next video 👍😀
@PotteryCrafters
5 жыл бұрын
Thank you so much! The "braided" handles are my favorites to make. 🙂 Thanks for watching.
I love this video. I'll be getting one of these for my coffee mugs Thank you
@PotteryCrafters
5 жыл бұрын
Who likes pulling handles right? You're going to love the time it saves. Glad you liked the video.👍🙂
I love my extruder for making handles. You’ve given me some great new things to try 🙂
@PotteryCrafters
2 жыл бұрын
Wonderful! It does make handle making more fun and easy. I never liked pulling handles. 😊
Thank you for your video!!
@PotteryCrafters
2 жыл бұрын
Glad it was helpful! Thank you Nick 😊
I was trying to decide whether or not to purchase one of these - you helped me make my decision. Thanks - subscribed!
@PotteryCrafters
4 жыл бұрын
I think you will really like it. I use it a lot. Check out Making 5 Ceramic Handles to give you a few more ideas. Thank you for subscribing.😀
Awesome video
@PotteryCrafters
3 жыл бұрын
Thanks Chelle 😍
I just ordered a clay gun made by The Ceramic Shop. Similar design to the Scott Creek gun. And about 8 different dies. My hand-built handles were terrible so I figured this tool should help. I like the braided handles.
@PotteryCrafters
3 жыл бұрын
That's great. 😍 I think you will like this video - Making 5 Ceramic Handles with A Handheld Clay Extruder -Easy No Mess Handles kzread.info/dash/bejne/aaqTrKSKocfKerA.html
Frema makes a hand held extruder as well, and it fits the shimpo dies. ( I think it’s the same tool )
@PotteryCrafters
2 жыл бұрын
You're right I think it's the same too.
Obrigada por compartilhar 🙏
@PotteryCrafters
3 жыл бұрын
Você é bem vindo 😊 You are welcome
Well, you sold me, I had to order one of those extruders.
@PotteryCrafters
4 жыл бұрын
So Cool, glad you enjoyed the video. Good luck with those handles. 👍
Hi Marie! Great video as always. Have you used the hollow shape extruder dies? They seem more sensitive to air in the extruder barrel and I am having the hardest time getting an extrusion without air bubbles in the clay, even though it is very well wedged. I wonder if you have any experience with this and any tips! Thank you!!!
@PotteryCrafters
2 жыл бұрын
Thank you Jessica 😊 I do not own any of those dies yet. I have only watched my friend do it. She didn't have air bubble problems. Did you make sure there was no air on the sides of the tube or the front or back that could get trapped in the clay?
Hi, thank you very much for this video and for all the others you posted, they are very useful and nice. I have a question. Do you think is it possibile to use a silicone extruder gun with very soft clay? The problem could be to wait to attach the handle to the mug, because the handle could be very soft... I thought this way because is cheaper but I didn't try yet. Do you think it could work? Thank you :-)
@PotteryCrafters
3 жыл бұрын
Thank you Sandra 💖Good question 😃 Yes you can. This video will be helpful kzread.info/dash/bejne/eGl2ztSyl9OXmNY.html 👍
Where does one find more dies for the handles? I have the same hand extruded and would like more handle patterns.
@PotteryCrafters
3 жыл бұрын
Hi Linda, I bought here scottcreekpottery.net/product/clay-gun-2-handle-acrylic-die-set/ 😍
Tem para comprar na Amazon ? Adorei 👏👏👏👏
@PotteryCrafters
3 жыл бұрын
No It is from Scott Creek. Shimpo also has one. Não, é de Scott Creek. Shimpo também tem um😃
@neuzeteribeiro
3 жыл бұрын
Pottery Crafters obrigada querida👏
@PotteryCrafters
3 жыл бұрын
Você é bem vindo 😍 You are welcome
I have no sound on this video.. 🤣but still watching 🧐
@PotteryCrafters
2 жыл бұрын
I'll look into it. Thank you 😊
I bought a Nidec extruder after watching your handle video. Unfortunately it seems to have a 2-1/4" die whereas all the others seem to be 2". Should I send it back?
@PotteryCrafters
2 жыл бұрын
That is a very good question. I'm glad you asked. Yes the Nidec dies are 2 -1/4. They will rest on the outside of the tube. Where as the 2 inch dies will rest on the inside of the tube. I have a video on the Nidec and Scott creek extruders. Here is the link for you. kzread.info/dash/bejne/enxto9x9iqinfKQ.html 😊
Hello there. Love your extruder. Where did you get all the disc'?
@PotteryCrafters
3 жыл бұрын
Thank you, Kimberly. I bought them here at Scott Creek. scottcreekpottery.net/product/clay-gun-2-handle-acrylic-die-set/ You can also get these. Shimpo Handheld Extruder - 8 Hollow Dies geni.us/K5CJH (amazon) (blick arts) 😍
@grafkimber
3 жыл бұрын
@@PotteryCrafters thanks
Hello, greetings from Spain! Where can I buy the dies? I can't find them on Amazon. Thanks for your videos. They are very useful! 🙏❤️
@PotteryCrafters
3 жыл бұрын
Thank you very much 😊This is where I bought it. scottcreekpottery.net/terms-of-service/ Not sure if they would ship to Spain but it's worth trying. Good Luck😍
@DesenfoqueGaussiano
3 жыл бұрын
@@PotteryCrafters Thank you very much!
Hi, do you have a link for this Tool, I can't find it.
@PotteryCrafters
4 жыл бұрын
Yes, I do. I love mine and use it all the time. www.sheffield-pottery.com/SCOTT-CREEK-SUPER-DUPER-CLAY-GUN-p/sccg.htm 😀You can also check out this video kzread.info/dash/bejne/aaqTrKSKocfKerA.html to give you more handle making Ideas. 👍
Click here to see pure joy - 4:34 Thanks for the smile!
@PotteryCrafters
4 жыл бұрын
Thanks for watching. Any suggestions for future videos please let me know. 😊