The winner is (drum roll ) Kevin Kuhl. 🎉 He guessed 1lb 4.11oz and the actual weight was 1lb 4.14oz. Congrats Kevin, send me an email with a shipping address and I'll get it out to you . EngineeredAngler@gmail.com

I applaud you for showing something that doesn’t work. I have done the same thing. Too many times in this day and age people only want to show success and never where things go wrong and that is why nobody learns from videos like that. I enjoyed this very much and will continue to show my fails as well! Good watch!

@EngineeredAngler

5 ай бұрын

Well said!

They can’t all be winners! Thanks for the video.

Unexpected results, for sure, but informative. Thank you for all your work on that.

@EngineeredAngler

5 ай бұрын

Thank you!

Nothing can inspire more than an out of this world lure design coming from a master lure maker ever.

@EngineeredAngler

5 ай бұрын

Wow, thank you!

I liked the story behind your coming across and old design revisited . That you brought your concept from paper to lure in hand is a victory in itself . In my humble opinion I believe had the head design of your lure been set back more with more the flat surface extended , like that of the Zalt Wobbler or the Drifter Tackle Believer .You may have achieved more wobbling action . I may add as well a more scooped head like that of the Luhr Jensen Kwikfish a more erratic swimming cadence would be achieved . I'd know the engineer in you will not have you satisfied and may return to workout the issue if not for closure . Thanks Franco , for all your content .

@EngineeredAngler

5 ай бұрын

I agree.

That looks like it would wobble like mad! We used those 50 years ago. You don't see them that much anymore

Never a less it just shows the talent you have. The skill you put into these lures are nothing but amazing....

@EngineeredAngler

5 ай бұрын

Wow, thank you

Even though it didn't perform as you had hoped, we got results. So now we know. I really enjoyed the experiment. If nothing else, I learned that the less material the lure has, the more precise weight & balance needs to be, every little bit matters. I haven't given the "water in the cup on a scale" method of measuring yet.

@EngineeredAngler

5 ай бұрын

Its the simplest and often the most reliable.

An interesting design, this is already something from the field of aircraft construction))) Great movie and experiment, thanks!!!

@EngineeredAngler

5 ай бұрын

Glad you liked it!

Interesting design, at least you thought outside the box you never know, could have been the best bait ever. As an engineer myself mistakes are never mistakes they are a learning tool. Great content as always Franko

Great stuff Franco, thanks for making and sharing!

@EngineeredAngler

5 ай бұрын

Glad you enjoyed it!

I think you should call this lure…..El Luchador. Also, I think a little dive bill, would make all the difference. Then, your adjustable tail will give you a variety of results. ….i was really amazed at how little action this had. ….i expected a really fast tight wobble, like a yozuri

I would love to see this but have an adjustable hinge for a dive bib just like your giant prop.

It was a good experiment thanks for sharing the results.

@EngineeredAngler

5 ай бұрын

Thank you! Cheers!

awesome video as always😀

@EngineeredAngler

5 ай бұрын

Thank you so much 😀

You videos inspired me to get into this hobby thanks

@EngineeredAngler

5 ай бұрын

That is awesome!

I think if the tail bet further back so that only the wider 'tail' section bent you would get a good tail wag...

Interesting shape. The down angle @2155 reminds me of a lazy ike

@EngineeredAngler

5 ай бұрын

yup a little bit.

Interesting! Now I can scratch that design off the build list. For now. Nice!

Now it's time for the adjustable lip! As an amateur lure builder, it's my chimera😂

This was more useful than you think. Sometimes I go fishing without catching a lot but I learn something. Why not make another video installing a lip? Stay with it till you find what ya want. You could screw different metal lips to the top of the head or a standard plexiglass diving lip to the underside. Either way you have a very interesting channel. Thank you

@EngineeredAngler

5 ай бұрын

Thanks for the suggestion

It looks good I think you will be able to get it working in the way you are looking for and maybe if you was to put a little bit upper fine on it it might give it a little more side to side movement

I would use it as a vertical wobbler. Standard technic for walleye and asp in my country.

I was looking forward to this video as an adjustable lure sounds awesome! I was a bit surprised that it had little to no action or just very erratic action. Cool concept that I think is definitely worth developing a little more. What about an adjustable angle lip next!?

@EngineeredAngler

5 ай бұрын

Glad you enjoyed it!

I thought you said you aren’t an artist… great paint job! Incredible content, as per usual

@EngineeredAngler

5 ай бұрын

Wow, thank you!

Great video. Shame it didn't work as planned. Keep up the great videos

@EngineeredAngler

5 ай бұрын

Thanks 👍

A lesson learnt!! The paintjob looks nice though.

@EngineeredAngler

5 ай бұрын

Thanks 👍

Nice work Franco, shame it didnt work as intended but still worth doing, thanks so much for sharing. I too think you should stay with it, try a bib on it and we can all learn together. I was secretly looking forward to the mexican wrestler paint job lol

@EngineeredAngler

5 ай бұрын

That's the plan!

I think the flat paddle on the back end stabilized it. Make the head a little wider. Or make the head and tail wider and a slow sinker. Use it like a jerk bait. It should do some crazy things.

@EngineeredAngler

5 ай бұрын

It actually works pretty nice as a twitch bait with the tail slightly angled down.

Hey Franco, another interesting experiment. When you cut the cedar on the table saw it looked like you didn't push the wood all the way passed the blade and left the wood between the blade and the fence with the blade still spinning. That wood can fly back at you. Pls be safe.

@EngineeredAngler

5 ай бұрын

Thanks for the tip!

Thanks 🙏 Franco! You showed us 3 different methods to find volume: 1- by density formula of a given material 2- the method that you're using in this video 3- by a "still", the water tube pipe that you built I experimented a lot using these 3 methods, there are remarcable differences between, big one! 4,5 grams. I experimented not only with lures, with cube shapes too where I can calculate volume and compare with the 3 above mentioned. Probably the density method is the most reliable one, what do you think?

@EngineeredAngler

5 ай бұрын

I have done the same kind of experimentation over the years. While the volume calculation with the density of the material is usually the most accurate it is only true when the material is well-controlled, meaning the material is uniform and non-porous. But for actual lure building situations the weight in water is most consistently accurate.

@lannabulls

5 ай бұрын

The "weight in water" is the method that you're showing in this video right? Indeed, based on your experience, this method is more reliable than the "still one" where you have to wait patiently that all the drops fall down from the pipe. Based on what I did it is. Thanks 🙏 so much, all this experimentation is fun!!!!!

Damn half an oz off. Almost 2 in a row. Love the content btw

I will love to see you doing an experiment on the different angles on a glider hermano “different angles for people to see the action on a glider “ salud hermano great work and awesome videos like always!!!

@EngineeredAngler

5 ай бұрын

Thanks

I've got a wall full of hanging lures that "at least are pretty"!🤣🤣 More than a wall of shame is a wall of learnings! Keep on engineering, con paciencia! 😍

@EngineeredAngler

5 ай бұрын

Siempre

I know a couple months old, but what about a plastic screw and nut, the ballast with the screw and nut may be too much weight to get a nice flick of the tail.

@EngineeredAngler

11 күн бұрын

not a bad idea...

Brilliant,,for me it was the concept that important,ive got darters than work just fine but i can see how i can make one with a hinge as just see,,,what if? ,,,scenarios,love it!😀👍

@EngineeredAngler

5 ай бұрын

Go for it!

I’ve got some lures gust like that, worthless😂😂. I sure like watching you make some awesome lures though.

try making that hinge more like a swivle (loose), maybe you'll get some better action, by the way, it was a nicely put together video, really enjoyed it 😸

@EngineeredAngler

5 ай бұрын

Thanks for noticing the effort on the edit. Cheers

I misunderstood what you were trying to do and now I wonder if it might help. Instead of making the tail controlled, just put a pin in it and let it "dolphin" up and down. There's lots of lures that go side to side but I can't think of any that are jointed and go up and down. I would be interested to know if it would work.

@EngineeredAngler

5 ай бұрын

I don't think it will work because most of the action comes from the shape of the head or the entry part of the lure. But that's an easy one to try, I'll pull the screw out and just stick a pin in. You might see the result in a short video.

Nice looking lure, I love the hinge idea but to be honest, you really made a lawn dart, heavy at the front, "feathers" in the back, pointy and rounded off, and yes, nice little dive bib at 35° - 45° would probably fix the action. Maybe even if you caved in the flat surface on the head a bit with a dremel it would grab more water. Maybe a future video idea? Make a mold and compare the original to the one with a lip and caved in one.

@EngineeredAngler

5 ай бұрын

Good point!

what would happen if that tail would be narrow? I think that there is a possibility that rear tail is "stabilizing" action of the front maybe? You got me interested to make it work now 😀As you said it yourself, I would never imagine it went so straight!

It is disappointing building a lure and not getting the action that one hopes to get. It really do like uv resin for repair/filler. I think it is better than the baking soda/super glue. Thank you.

@EngineeredAngler

5 ай бұрын

Totally agree

When you use the small magnets for molds and high pitched rattles what size do you use or suggest because I’m planning on buy some in bulk off Amazon. Thanks Alex

Could the unweighted tail be a reason for the lure to be so stable when the tail was angled uppwards acting like a buoyant hydrofoil. 🤔

@EngineeredAngler

5 ай бұрын

I don't think so...

Is anybody with me on this??? In the weeks between new builds, what if you took an old lure and just modified it? For example, what if you cast a crankbait from one or your old molds in silicone or the stiffer, more durable type of plasticol? I would love to see what that does to the action. The Nomad Vertrex Vibe is partially cast in silicone. A lot of people love that lure. Does the silicone really make a difference? Can the Engineered Angler give us an answer?

@EngineeredAngler

5 ай бұрын

I have actually done exactly that. The big difference is the lure has no positive buoyancy and is not stable enough to give any consistent action. But makes a wicked fast sinking twitch bait.

@davidbailey9587

5 ай бұрын

Interesting. Thanks for all your work!!! @@EngineeredAngler

Looking at it from a scientific perspective, if we don’t try it, we observe nothing. 😀

Mexican wrestling 😂😂😅

Que paciencia hay que tener para esta mier...🤣🤣🤣🤣🤣🤣🤣🤣 LO mejor del video. Saludo desde Colombia.

@manesw1

5 ай бұрын

Veo que no soy el unico que lo a oido......jjjjj

@juderyan1284

5 ай бұрын

I wondered what he said lol

I wonder what would that lure act like if you ripped in a jigging action?

@EngineeredAngler

5 ай бұрын

I wonder too...

let us guess YOUR weight

@EngineeredAngler

5 ай бұрын

You made me lough out load with that one...thanks

not feeling the 80s porn music

Almost 2 million views and only 41k subscribed. Press that sub button!

@EngineeredAngler

4 ай бұрын

Amen!