Making an Energy Monitoring System
Ғылым және технология
Making a 3-Phase Energy Monitor for Home Assistant. Three PZEM-004T are connected with an ESP8266. Using an Esp-Home, ESP8266 has been programmed, and the whole system is connected to Home Assistant. Dashboard panel has designed in a way that we can monitor voltage, current and power on all three phases, separately.
#home #energy #monitor
Пікірлер: 31
This is the tutorial 'how to put something in a case'....
As you did the page or how you managed to link the data and that interests me a lot
Nice.
Super.
Hello. Did you use a 5v to 3.3v voltage converter from the pzem to the esp?
When can we expect an entry on your blog about Energy Monitoring System?
You have a very cool project, it would be possible for you to make a video explaining how to program the pzems from scratch and how the .yaml of the esp8266 would look like, I am trying to do it with 2 pzems+nodemcu v3 eso8266 but I can't get them to work with the documentation What's on the esphome website? Thank you so much.
Could you please share a code and your HA config?
Hi, congratulations for your work. Can you please tell what is the purpose of the diodes 1n4148 in RX and the purpose of the R1 of 10K between RX and 5V? Best regards
How do you handle if one of the PZEM loses AC Supply but the PZEM itself remains powered on? Cause PZEM displays the last known data(Voltage, current, power) instead of NaN when it loses AC In supply.
Hi, do you sell the board that you made to ESP?
Hi, is there a reason why you never uploaded the tutorial of this project to your blog? Also i was wondering how is it possible that in your dashboard each line has its own voltage? Basically the Ct only detecta the current (A) so how does the software detects the different voltage between each line? 😅 thanks!
how to make the capacitor to holdon during power factor correction until the inductive is off in automatic power factor correction
can i pass phase/line wire through CT coil ??? can you share wiring diagram
Brilliant project, I'm looking forward to seeing you update your blog. Regards and may more projects like this
@abobija
Жыл бұрын
Thank you!
@cycu87
Жыл бұрын
@@abobija If I may ask, what are the parameters of these three diodes
@cycu87
Жыл бұрын
what should be the settings in the tasmot? D2 GPIO4 -> PZEM0XX TX , D1 GPIO5 -> PZEM016 RX ?
Hello. There are 3 pzem-004t v3 in my project and I am trying to get data with nodemcu. I can retrieve data for each pzem one by one without any problems. However, when I connect to D3 and D4 pins, whether I define an address or not, only the last address is returned and mostly data is missing. Can I have your code that shows the sensor readings except the important parts?
Nice project! Well documented, showing best practices, full HD camera and decent lighting. What more do you want?
@abobija
Жыл бұрын
Thank you!
hi which diodes did you use. thanks nice project
@abobija
Жыл бұрын
Thanks, diodes are 1n4148
Can you post links to the soldering iron you use? I would like to buy one.
@abobija
Жыл бұрын
Code name of soldering iron is SQ-A110, and link from where I've bought it is www.ebay.com/itm/353757369535
Hi! Pls code and shema!
Sir I want your project
Predobro, moze li code i shema? 😊
@abobija
Жыл бұрын
Naravno, planiram napisati uskoro blog post u kojem će biti navedeno sve što je neophodno za sastavljenje ovog projekta. Hvala na komentaru bro ;)
@hazimalias
Жыл бұрын
@@abobija really appreciate it bro..
Sir can you provide schematic diagram of this project