Very nice. I am working with epoxy, too. You can hide the screw by painting the inside of the drill hole with permanent marker before you glue in the screw.

@BearBearCammy

7 күн бұрын

@@eddabrandes7395 Brilliant idea! Thank you!

It's beautiful.. My sis makes so beautiful.. Resin items ❤

@BearBearCammy

11 ай бұрын

Thank you so much 😊

@daniagonzalez6253

Ай бұрын

A que precio da los llaveros de letras tu hermana?

Its perfect Love it ❤❤❤

Wow amazing it's so beautiful ❤️

@BearBearCammy

Жыл бұрын

Thank you ☺️

I made the same but in blue😊

good idea and so beautiful

It’s clear and beautiful thanks

To all who cares, please use gloves. 😮 Beautiful design

@BearBearCammy

Жыл бұрын

Yes, please use gloves. I just ran out of it :(

@ThisWiseVibe

Жыл бұрын

​@@BearBearCammy😊 Cammy, May I ask how you created your gold letters on the transparent sticker?

@BearBearCammy

Жыл бұрын

I’m using the cricut machine :)

@shivaniraikar2945

4 ай бұрын

Cn u tel wer cn i buy those mixing container used in video

You know you can buy like a UV light off Temu! It’s around four dollars and it’s very good. I’ve tried it before.❤

@BearBearCammy

22 күн бұрын

I'll check it out!

@Yaelokre_122

22 күн бұрын

@@BearBearCammy thank you!❤️

You can use uv light but still its amazing 😊❤

@BearBearCammy

Ай бұрын

UV light only work for UV resin while i'm using epoxy resin.

U can use uv light for the resin to dry faster

@BearBearCammy

4 ай бұрын

On a non uv resin? 😳

Straight mould or reverse mould which is better??

@BearBearCammy

Ай бұрын

Depending on own preference.

Wow ! It's beautiful ❤️

@anzarimran3559

7 ай бұрын

Jhuti h mera paisa lekar nhi lota rhi

That’s my name too🥰🥰

Hello what size is the font used?

@BearBearCammy

7 ай бұрын

Font size used every time will never be the same due to some font is larger. As long as you pick the small font than the mould should be fine.

@charleeze8732

5 ай бұрын

Where can I get the small resin letters from

Do you use nail buffer for sharpening edges ??? Please tell soon

@BearBearCammy

5 ай бұрын

Yes if necessary.

Hi, takes for this video How do you make the name stickers? 😅

@BearBearCammy

Жыл бұрын

I’m using the cutting machine :)

@ThisWiseVibe

Жыл бұрын

​@@BearBearCammyThe cricut cutting machine?

@MOoLiViaA

16 күн бұрын

@@BearBearCammycan send link to machine

❤❤❤❤

Grear design. What did you stick on there before drilling? What does this do?

@BearBearCammy

3 ай бұрын

I'm using a masking tape before drill. This will make the dust trap on the masking tape instead of flying around.

@Splendorokwudiri

11 күн бұрын

Please help me out they chemicals list them here for me

Can you please tell me which liquid you use🤔🤔

@BearBearCammy

3 ай бұрын

Epoxy resin.

if you paint epoxy resin with acrylic will it stay see through?

@BearBearCammy

Ай бұрын

@@Yurii-qn3lq You mean paint outside a cured resin or mix with acrylic colour before it cure?

@Yurii-qn3lq

Ай бұрын

@@BearBearCammy before it dries/cures

@BearBearCammy

Ай бұрын

@@Yurii-qn3lq yes, you can use acrylic as colour pigment for epoxy. Depending on the how much colour you add in. If thick enough, it won't see through.

What drilling machine did you use ?

@BearBearCammy

Жыл бұрын

I'm using a normal mini drilling machine. (no name on it). But any rotary tool with drilling mode will work.

How do you get the names? Where do you purchase or how do you get them?

@BearBearCammy

5 ай бұрын

kzread.infoMsKO6s-Jdtw?si=0HN3FoqtXdmA8Q5x

How did u get to make the resin black?

@BearBearCammy

4 ай бұрын

With black pigment.

What do you use for the stickers?

@BearBearCammy

Ай бұрын

Vinyl sticker

What paint ddu use?

@BearBearCammy

11 ай бұрын

i'm using the alcohol ink for resin.

How you made that glitter name

@BearBearCammy

8 күн бұрын

Using cutting machine

From where we can get the vinyl golden letter.

@BearBearCammy

5 ай бұрын

This is custom made. You can refer to my video: kzread.infoMsKO6s-Jdtw

How did you make small mok stickers?

@BearBearCammy

5 ай бұрын

kzread.infoMsKO6s-Jdtw?si=0HN3FoqtXdmA8Q5x

Why were you used a lighter 😮

@BearBearCammy

2 ай бұрын

To flame out those bubbles

Where do you buy this pigment from??

@BearBearCammy

Жыл бұрын

The pigment is easily find from AliExpress. There are tons of them. And etsy too 😊

@Mochibaee

Жыл бұрын

@@BearBearCammy Ok thankx 😌

How to make vinyl custom name you use ? ❤

@BearBearCammy

5 ай бұрын

Check out my video on this and consider subscribe so that you wont miss out any notification whenever i upload i new video. kzread.infoMsKO6s-Jdtw?si=0HN3FoqtXdmA8Q5x

Did you use a cricut cutter or something for the name?

@BearBearCammy

5 ай бұрын

I'm using cricut maker. You can refer to my other shirt video on this.

@angeladiaz9843

Ай бұрын

@@BearBearCammy

How did you make the letters?

@BearBearCammy

5 ай бұрын

Check out my video on this and consider subscribe so that you wont miss out any notification whenever i upload i new video. kzread.infoMsKO6s-Jdtw?si=0HN3FoqtXdmA8Q5x

name Keychain

Wer cn i get those small containers

@BearBearCammy

4 ай бұрын

AliExpress is selling them.

Do you sell these keychains?

@BearBearCammy

2 ай бұрын

Hi, i'm not selling them at this moment.

Where do u get the name sticker?

@BearBearCammy

Ай бұрын

i make it myself

@glitterzebahi1064

Ай бұрын

How pls

Hello there! Where do you get your mold?

@BearBearCammy

Жыл бұрын

Hi, you can easily get it from AliExpress or Etsy shop.

@KitchenFocus

11 ай бұрын

Amazon!

Mam from where stickers purchase

@BearBearCammy

5 ай бұрын

kzread.infoMsKO6s-Jdtw

Alas my resin didn't hard. Could you give me the solution?

@BearBearCammy

8 күн бұрын

Which type of resin you bought? UV resin? Epoxy hard resin? Expoy soft resin?

@letslearnenglishgrammar7074

8 күн бұрын

@@BearBearCammy art resin named resin i used. It didn't hard even i mixes the same amount as given on the bottle

@BearBearCammy

8 күн бұрын

@@letslearnenglishgrammar7074 Art Resin should be a good brand. If you are using the hard type and it was not hardened. Make sure you really mix them really really well. Especially those at the edges, side and bottom. With the correct technique and ratio. It will harden no matter what. Good luck :)

Where do you get the stickers from ?

@BearBearCammy

Жыл бұрын

The sticker was custom made by me. You need to get a cutting machine to make this :)

@akidtaufiq496

10 ай бұрын

dont mind can i know what model or brand is the cutting machine?

@BearBearCammy

10 ай бұрын

@@akidtaufiq496 I’m using the Cricut Maker 3

Which resin you use in it..

@BearBearCammy

6 ай бұрын

Epoxy resin (hard)

@sarinabagade6629

6 ай бұрын

2:1 ratio or 3:1

@purvibhatt9952

6 ай бұрын

Please tell me how to measure 3:1 resin for only one alphabet

@sarinabagade6629

6 ай бұрын

@@purvibhatt9952 measure with water... And divide by 3

Beautiful ❤️ where do you get your stickers please x

@BearBearCammy

5 ай бұрын

Check out my video on this and consider subscribe so that you wont miss out any notification whenever i upload i new video. kzread.infoMsKO6s-Jdtw?si=0HN3FoqtXdmA8Q5x

Where to get name sticker plz reply

@BearBearCammy

10 ай бұрын

It is custom made.

Hi

My resin keytags are very sticky what to do for that??

@BearBearCammy

9 ай бұрын

1) Your resin may not 100% cure. 2) Your epoxy vs resin ratio is wrong.

@meandmywork92

7 ай бұрын

​@@BearBearCammyMy key chain is not hard.nwhat to do?

@BearBearCammy

7 ай бұрын

1) Make sure you are using the hard epoxy and not the soft type. @@meandmywork92 2) Make sure the ratio is correct 3) Try to leave it dry for 1-2 days day. If still not hard. Refer to number 1 and 2

@meandmywork92

7 ай бұрын

@@BearBearCammy ok thank you

Mam why my resin is very thick Resin liquid is very thick

@BearBearCammy

5 ай бұрын

Make sure the ratio is accurate. You need to ask your seller on the ratio.

How to make the name?

@BearBearCammy

8 ай бұрын

Cutting machine

Team M name 👇

Where can we get GOLD Name stickers ✨️❤as u used

@BearBearCammy

7 ай бұрын

This are vinyl sticker. You can easily get it online.

@Spaneditz

7 ай бұрын

Where plz give information​@@BearBearCammy

@BearBearCammy

7 ай бұрын

@@Spaneditz just google for vinyl sticker for the sticker. But you will need a cutting machine to cut out those names.

koheda meva Ganna thiyenne

@BearBearCammy

Жыл бұрын

Palathuru athpudiyak tiyanavadha?

Where can we get this golden written name??

@BearBearCammy

Жыл бұрын

I custom made it myself by using a cutting machine to cut it out. You can get from Etsy if anyone custom made this.

@jinayousif6605

Жыл бұрын

What size of letters are they please and thank you 🙏🏻

Slow down, please

@BearBearCammy

Жыл бұрын

Stay tune for upcoming video :)

What are the words made of?

@BearBearCammy

9 ай бұрын

Those made of vinyl paper ☺️

@iqrilahgustian3209

8 ай бұрын

what size is the font?

Jo black color wo kis form mein liya tha ap ne...?

@BearBearCammy

3 ай бұрын

Alcohol ink for resin.

@way_to_heaven_1

3 ай бұрын

@@BearBearCammy thanks alot for response

Name is printed on what sheet?

@BearBearCammy

10 ай бұрын

Sticker sheet

How did u wrote the name, where did u buy?

@BearBearCammy

8 ай бұрын

I'm using a cutting machine

How much rupees

@BearBearCammy

5 ай бұрын

Not selling bro.

which is gule liquid name ?

@BearBearCammy

10 ай бұрын

There are no glue use in this video

Price pls

@BearBearCammy

11 ай бұрын

Not selling international.

What is name of drill machine

@BearBearCammy

10 ай бұрын

Yu can just search for mini drill. This one i'm using is OEM. hence there's no brand on it.

Please tell me the ration resin and hardener

@BearBearCammy

8 ай бұрын

First, please tell me which type or resin you are using.

@anaraeveryday

8 ай бұрын

actually i dont know which type 😅 i just buy clear resin, after see many videos i guess the best resin for art is epoxy resin? Or lycal resin? Lycal resin is more pricey. Which type resin do you use? TIA!

@BearBearCammy

8 ай бұрын

Majority people will be using epoxy resin. When you purchase yours, make sure the read the instruction. Even the epoxy resin will have different ratio. Either 1:3, 1:2, or 1:1.All resin will stated the ratio. Hence i cannot answer your question. The resin i'm using is 1:3 (1 hardener : 3 resin) @@anaraeveryday

@anaraeveryday

8 ай бұрын

@@BearBearCammy thanks a lot!

Where did you get this name sticker

@BearBearCammy

7 ай бұрын

I made it myself.

@wgo2404

7 ай бұрын

@@BearBearCammy how??

@BearBearCammy

7 ай бұрын

@wgo2404 I will try to make a separate video on this. Stay tune.

Pls rate?

@BearBearCammy

10 ай бұрын

??

Beimaan paisa kha gyi mera

@BearBearCammy

6 ай бұрын

aap kis beeemaan kee baat kar rahe hain?

How can make the name?

@BearBearCammy

10 ай бұрын

I’m using the cutting machine for this.