Making a Tapering Teardrop Pendant: A Silversmithing Tutorial
Тәжірибелік нұсқаулар және стиль
This tutorial shows how to make a teardrop shaped pendant featuring a green dyed Agate. This is a simple design that might be a good beginner project. For materials, I used 26 gauge sterling sheet, 10 gauge sterling round wire, and 3/16 inch fine silver bezel strip in 26 gauge. As always, I use hard silver sheet solder and My-T-Flux from Rio Grande.
I enjoy sharing my knowledge with others, as I've taught people for most of my life. This hobby turned into a fun side gig for me for years while I taught public school. I love suggestions and hearing about others' experiences. What is your favorite project? What kind of tutorials would you find useful? Scroll down for information on my new Patreon!
Please feel free to share this video, and I would love to have you subscribe! Make sure to ring the bell for updates when new videos are uploaded.
I just passed 8200 subscribers! Thank you all for making that happen.
If you’d like to contribute to my efforts, or express appreciation, you can at the link below.
Here are my important links:
www.buymeacoffee.com/cvpark7
Thank you so much for all the kind words and suggestions!
Here is my website where you can purchase my jewelry, and can inquire about classes if you are in the Northern Colorado area:
www.cvpsilver.com
Thanks,
Chad Parker
Join My Patreon!
www.patreon.com/user?u=5602676
Tier Information:
Silver Supporters
$5/month
This is a much appreciated way for you to support me while gaining access to some exclusive ad free content.
What's included
* Support The Artist
* Ad-free content
Silver Super Supporters
$10/month
You receive all benefits from the first tier as well as a shout-out on my channel. Here you will also get some behind-the-scenes peeks, and voting power concerning some upcoming content.
What's included
* Support The Artist
* Ad-free content
* Patron shout-out
* Behind the Scenes Content
* Voting power-to determine projects and influence content.
* Exclusive video tutorials
Silver Stars
$25/month
This tier provides all the benefits of the 1st and 2nd tier. In addition, you get access to a monthly live stream, a Q & A session, and discounts on jewelry.
What's included
* Support The Artist
* Ad-free content
* Patron shout-out
* Behind the Scenes Content
* Commission pieces mutually agreed upon(delivered by mail)
* Livestreams
* Live Q&As
* 15% off jewelry purchases
* Voting power-to determine projects and influence content.
* Exclusive video tutorials
Silver Superstars
$150/month
This level of membership provides all the benefits of the previous 3 tiers. In addition, it includes live-streamed interactive instruction in a small group format twice per month for 8 hours per month total. This tier is limited to 4 people for now.
What's included
* Support The Artist
* Private community
* Ad-free content
* Patron shout-out
* Behind the Scenes Content
* Livestreams
* Live Q&As
* Live Virtual Small Group Instruction
* Voting power-to determine projects and influence content.
* Exclusive video tutorials
* Commission pieces mutually agreed upon(delivered by mail)
_______________________________________________________________________
I NOW HAVE MERCH!
Click the store on the KZread channel page to check it out.
, or here is a link:
chads-silversmithing-shop.four...
#jewelrymaking #silversmithing #jewelry #jewelryhandmade #jewelrytutorial #jewelrydesign #jewellery #jewellerydesign #handmade #maker #crafts #jewelryartist #bespoke #artist #silver #scrap #earrings #diy #jewelrytips #finding #bezel #jewelrytutorial #soldering #pendant #makingjewelry #bails #necklace #taperedwire
#agate #beginner #simplejewelry #simplejewellery #jewelrymaking #stonesetting
green agate pendant
a great beginner project pendant
tapering wire for a pendant
learn jewelry making
Making Silver Jewelry
Making Jewelry
make jewelry at home
Пікірлер: 38
What a great start to 2024, love it! Thanks for sharing Chad and take care.
@chadssilversmithing
5 ай бұрын
Thanks Gazz! Happy new year to you and your family:)
I really love your design. Simply elegant.
@chadssilversmithing
5 ай бұрын
Thank you so much!
Hi Chad, I enjoyed this tutorial so decided to make one. I didn't have 10 gauge of course, so I improvised with sterling fork tines. They were just the right length. The bottom where I soldered them together was a little deeper than the wire would have been so I propped the bezel I made so that it would be set flush with the stone. Other than a little solder gap it didn't turn out too bad. Definitely wearable. If I knew how to import a picture of it I would show you.
@chadssilversmithing
5 ай бұрын
Very creative Jean! I'd love to see it:). You could send me a pic through Instagram if you are on that platform. Thanks for the nice comment!
@jeanmenden5105
5 ай бұрын
I don't do instagram. If you could let me know your email or FB contact I'll send you the pictures. I did another one today in hopes of cleaning up the solder gaps. It's OK but not perfect. Jean @@chadssilversmithing
@chadssilversmithing
5 ай бұрын
facebook.com/CVPSilver
This is really pretty, I really like the round taper. One tip I heard about and now do, is use inexpensive brass wire (or sheet if sheet is needed) to use for in situ measurements. This leaves the precious metal undeformed. Sanding from a rotation tool: brilliant! 🌺 🌺 🌺
@chadssilversmithing
5 ай бұрын
Thanks Flying Chef!
That turned out wonderful, Thanks again for such a great video to start off the NEW YEARS inspirations for us.
@chadssilversmithing
5 ай бұрын
Thanks Marietta! It is my pleasure:)
Your way of proceeding with construction, always seems perfect to me. I'm learning a lot. Thank you.
@chadssilversmithing
5 ай бұрын
Thanks! I'm glad these are helpful to you:)
I’m so glad I found you!
@chadssilversmithing
5 ай бұрын
I'm glad you found me too! Welcome livelifeasafruitfly:)
This is beautiful ❤️ thinking about it if you were to make more room between the swirls it would make a lovely ring holder
@chadssilversmithing
2 ай бұрын
Thank you Shannaa!
Thanks, Chad. Great project. I really enjoy your content. Thank you also for the nice note you sent with my merch. That was a lovely, personal touch. Have you done any flush setting videos? I would love to learn how to do that. 😊
@chadssilversmithing
5 ай бұрын
Hello Satalia! I'm glad you got your order:) Interesting that you should ask about flush setting. I am currently practicing that technique. I had never tried it until just recently. Once I feel like I have a good handle on it, I will make a video.
Absolutely gorgeous
@chadssilversmithing
5 ай бұрын
What a nice comment! Thanks:)
Beautiful! Thanks Chad,! Happy New Year!
@chadssilversmithing
5 ай бұрын
Thanks:) You too Melinda!
Chad, you can also use your rolling mill and step taper your piece then file and it works like a charm. I haven’t done in on smaller material like you have, but I think it would still work fine. Happy New Year to you! Thanks for all that you share.
@chadssilversmithing
5 ай бұрын
That's a good idea:). That might save some time. Happy new year Scoobs!
Happy New Year Chad 🎉 - another great video 😊😊
@chadssilversmithing
5 ай бұрын
Same to you Norma! Thank you:)
Great idea and excellent
@chadssilversmithing
5 ай бұрын
Thanks Larry!
Lovely piece, happy new year Chad 🎉
@chadssilversmithing
5 ай бұрын
Thank you Starur:). Happy new year to you as well!
@starur
5 ай бұрын
@@chadssilversmithing Thank you 😊
Very nice thank you it would be nice if you could have showed how you set the bezel did you cut any of the length off or put something inside the bezel for the stone to sit on like sawdust .or ? And you said you used a drill to tidy the top of the bezel it would have been nice to see and the drill bits you used .😊❤
@chadssilversmithing
4 ай бұрын
Hello Jakki. I don’t use sawdust as it decomposes pretty quickly, but tagboard (non-corrugated cardboard). It is compressible and doesn’t break down like sawdust. The cleanup is with a blue (fine) silicone polishing wheel. Hope this helps:)
@jakkibaker1818
4 ай бұрын
@@chadssilversmithing thank you will have a look at that I have not done it just what some are saying ,I took a silver spoon apart last week oh my that had some kind of brown glue in it that was strong the handle was silver I think the bottom part was plated . Got some of those silicone wheels not used them yet will give them ago thanks again for reply 😊
Do you drill a small hole in the bottom of the besel for light reflection????
@chadssilversmithing
5 ай бұрын
Not on this one:)