As a beginner, I find your "small" tips extremely useful!

@blacklegbeastro5295

2 жыл бұрын

The tups are great and in trying to figure out what i can use around the house as substitutes, I didnt realise leather working needed so many tools

his way of speaking and lecturing encourages & motivates me. he is just like Bob Ross of leathercraft world.

Chuck Dorsett is the Bob Ross of leathercraft.

@karlhungusjr1

5 жыл бұрын

that is so accurate...

@paleosteveo3501

4 жыл бұрын

Very Cool!

@khornethegrim8258

4 жыл бұрын

Instead of "happy little accidents", we get "very clean, very professional." Chuck Dorset is great. I am so happy I found this channel.

@marcuschauvin7039

4 жыл бұрын

I don’t see any “happy little trees” on the leather...

@taitano12

4 жыл бұрын

Except louder. 😆 Each appropriate for their craft.

This was my first leather working project, and I made it for a longsword instead of a dagger. It turned out great!

@WeaverLeatherSupply

4 жыл бұрын

That's awesome, thanks so much for letting us know!

@violetviolet888

2 жыл бұрын

@@WeaverLeatherSupply 8:27 You can add a leather washer behind the rivet that is still on the inside of the liner and install it so that the inside has no metal. Then you have strength and craftsmanship.

The material you made the insert from is called hardboard. You could also use polyethylene. Cut it out and smooth the edges a bit. Completely waterproof, lasts forever.

I really like and appreciate the longer video format, and the informative tip and tricks. Thanks for the great video Chuck. Love to see a follow up video on how you make the frog.

@rahulsen1170

Жыл бұрын

M

@rahulsen1170

Жыл бұрын

My

Re treating edges: I like to rub beeswax into beveled raw edges(after dying) and using a slicker to "melt" the wax into the edge by friction. I've done this on belts, holsters, sword scabbards and knife sheaths . It gives a nice smooth look, and also waterproofs the edges. YOUR thoughts on this?

I will be doing this for my LARP swords! Got all the materials and gear, and this will be my first project ever!

@WeaverLeatherSupply

5 жыл бұрын

That's awesome, Steven! Have fun with it!

@leonardocucchiara4782

3 жыл бұрын

How did it go?

@zacharyschwab400

3 жыл бұрын

Yea how’d it go

@violetviolet888

2 жыл бұрын

*Being Japan* : How did it go?

@BeingJapan

2 жыл бұрын

@@violetviolet888 it was a challenge but got it done. Thanks for asking.

Thank you so much, I've been trying for months to figure out how to stitch this type of scabbard, over lapping, stitching at 45 degree angle, etc, etc. I knew there was a better way, and it probably would be something simple I was just overlooking. Sure enough, wet forming it after stitching! Wow, such a "duh" moment. But this is why I love leather crafting, there seems to always be one more trick to learn. Again, thank you, and happy crafting.

@WeaverLeatherSupply

5 жыл бұрын

Thank you, Mark! Glad the video was helpful, I'm still learning new things too!

The short sword i have made is incredible “thus far” and now I know how to make a sheath so thank you

So THAT'S how it is done! Thanks. Now I have the confidence to try one of these for myself.

It took some time because of me being unexperienced, but thanks to this tutorial I just made my first own scabbard! It works well! Thanks a thousand times!

This guy is great in so many ways. Great lessons and always a joy to watch him work. I met him at blade show and he is super nice in person as well. I told him mostly thanks to his vidoes I now make my own sheaths and I showed him photos of a few. I am sure he gets that a lot but he seemed very happy to hear that he had inspired and helped in such a way. Looking forward to more projects for sure. Thanks Chuck!

@WeaverLeatherSupply

4 жыл бұрын

Thank you so much, it's always good to see your work and I'm honored that you were inspired by the videos!

Hey, thanks so much. I used your tutorial to make a scabbard for a small sword. It's turning out pretty good, a bit rough in spots but it fits like a glove. I molded the triangular blade using your wood method but clamped dowels on top to press into the hollow ground portions. The seam on the back put enough pressure to fill in the hollow ground portion on the back. It looks like a scabbard I saw in in the musee d'armee paris-- very slim simple black leather scabbard for an officer's smallsword that was molded into the triangular shape of the blade. Thank you for the quality tutorial!!! Superb effort, I love you creative folks sharing your knowledge and skills.

Nice. Very long video but extremely detailed. This is the type of scabbard my cutlass has.

Learned something new and useful every second! Thanks Chuck! Your knowledge and expertise are greatly appreciated!

@WeaverLeatherSupply

5 жыл бұрын

Thanks so much!

This is exactly what I needed. I wear a kilt almost everyday, and I often wear my basket-hilt backsword along with it, however I have never liked the black leather scabbard that came with my backsword because I cant stand wearing black leather in the daytime. I am old fashioned and I only wear black leather after 6PM or for dress occasions. For daywear I will only wear brown leather. I had a Scottish cross-belt sword belt duplicated in brown leather from one I already had in black leather, however it always looked off when the black leather scabbard was placed in it. Now I can have a black set and a brown set, PERFECT.

@Senzeni

3 жыл бұрын

Read this in my Scottish voice to the tunes of bagpipes

Thank you for explaining your sewing technique in such detail. I've really been struggling!

thats a beautiful rapier and dagger set. once again thanks for the video, i have made a few scabbards in the past but always learn something new with these videos!

@WeaverLeatherSupply

5 жыл бұрын

Thank you, Robert!

that was a great tutorial! thanks much for it. I honestly wish I would've seen that 2 weeks ago when I was making a sheath for a dagger. I had to reverse engineer one on a previous dagger to (more or less) figure it out. End result was one that looks very similar to this tutorial. sure wish I woulda known earlier. Awesome job too!

Chuck you are an excellent teacher, presenter! You should do more stuff like this.

@WeaverLeatherSupply

2 жыл бұрын

Thank you so much for watching our videos and following along!

The quality and instructiveness of this video is simply mind blowing. Great watch, thanks!

@WeaverLeatherSupply

3 жыл бұрын

Wow, thank you Charles!

This is precisely what I needed for the Scottish dirk I made, I really have no way to easily make a brass throat and tip, this looks great and is way easier to make!

Nice to see someone so excited to make leather items for weapons! I Learned some tricks!

Chuck thanks a ton for the great detailed video.

Great video! Chuck is an awesome teacher! I've been wanting to make a scabbard like this but didn't know where to start. Definitely going to try one this weekend!

@WeaverLeatherSupply

4 жыл бұрын

Thank you, Brian!

Chuck is a rock star

Loved watching this... and have a couple of tips that may enhance this a bit... first is the Frog... as you have a Sam Browne post on the sheath... what about putting in a Buttonhole Punch hole on the first strap of the sheath... that way you can capture the sheath with that, and drawing and re-sheathing the blade will be a lot easier... secondly, if you put a 1" to 1 1/2" band of unwashed sheepskin in the throat of the sheath, maybe even matching the overlayed throat piece and stitching it in following the overlay shape, it will do 2 things... first it'll hold the blade in the sheath more effectively, but secondly, it will clean and grease the blade as you insert it and pull it out... that layer of sheep's grease on the blade will ward off rust the natural way... I do Viking Re-enactment in the UK - the guy that made my sheath used the wool trick and it keeps the blade in pristine condition... every now and then as the sheath gets older, you can charge the wool with a few drops of olive oil or mineral oil to keep it doing it's work, and although we wouldn't use Sam Browne posts, I know of frogs from the medieval times and onwards that do have the button hole in them to capture the sheath... nothing is new under the sun, as they say... ;)

I just finished making a sheath and pattern using this method for my 11thc norman sword and it looks better than i thought i could make thanks!

@WeaverLeatherSupply

3 жыл бұрын

That is awesome!

thanks again for another great video.

Just about to fall asleep and what do you come along with? An absolutely awesome instructional video for something I was just thinking about doing. I didn't know how I was going to get to sleep without watching this, then I saw the length of the video. Anywho, thank you for making these instructions, for making them easy to follow, and for having the same interests. Appreciate all your videos.

Thank you for taking the time and sharing the knowledge, greetings 👍

man, you're videos are amazing

Wish I had found your channel sooner - I used to joust professionally full time, and having some custom scabbards for my swords would have looked great on the field!

@WeaverLeatherSupply

4 жыл бұрын

That's really cool, Jeff! Glad you found us and hopefully you'll have an opportunity to still make a custom scabbard!

Very nice. I have been trying for a long time to figure out how one would put that spleen in there. Now i know. I should have asked you first. Thanks. You make it look so easy.

@WeaverLeatherSupply

5 жыл бұрын

Thank you, Alan! So glad it was helpful!

What a great video! Lots of useful information. I’m with the other viewer: the longer videos are so nice! Thank you Chuck and thank you Weaver!!

@WeaverLeatherSupply

5 жыл бұрын

Thank you, Choya!

@CantrellLeatherGoods

5 жыл бұрын

Weaver Leathercraft Absolutely!!!

"That's about $3 worth of wood." I miss you 2019.

I can’t even begin to say how much these videos have helped me advance into this craft of endless possibilities! You make every project seem so approachable for someone who has only been doing this for maybe 5 months. Thank you so much! P.s. maybe do a frog/hanger for sword and dagger scabbards next?

@WeaverLeatherSupply

5 жыл бұрын

Thank you, Luke, that means so much! I would love to do a dagger frog, hopefully soon!

This is awesome! I can't wait to make one of these. Thanks so much!

@WeaverLeatherSupply

4 жыл бұрын

Thank you, Mark!

Extremely well done, thanks for this!

Great video! I have 2 or 3 of these daggers - can't wait to get started.

@WeaverLeatherSupply

4 жыл бұрын

Thank you, we hope they turn out great for you!

I was given a 1918 Australian bayonet, with a leather scabbard. 5 years later I met an Australian man and gifted it to his dad to hang on his wall. Always pay it forward.

Sir, you are a perfect teacher

Nice work!

Well done as always Chuck here in California we are out of luck on daggers not allowed you we might cut our selves twice but you can go down to home depot or low'es and buy what is called a utility dagger for cutting insulation . Oh what would we all do with out big brother watching over us . Happy trails

@firsttpt

3 жыл бұрын

Be careful, the utility daggers, insulation, Home Depot and Lowe's are known to the state of California to cause cancer.

I'm very slowly working on an Aragorn costume and wasn't too happy with the sheath that came with the ranger sword. Look forward to remaking that. Just need to figure out how to stack the little knife on top now. Thinking just cut a slit and gluing a thin liner piece behind that maybe? Probably test that before going full size

I want a fancy letter opener. Now I have the perfect case when I do

Amazing! Thanks

Some of the best videos on KZread.

@WeaverLeatherSupply

5 жыл бұрын

Thank you so much! 🙌

Really cool

Chuck, you rock bro! I've learned so much from your videos, thank you! You know your craft inside and out & your a very good teacher. Every time I need some help or know how with leather, I go straight to your videos. I'm going to screen shot your portrait and print it on iron-on printing paper then iron it to the front of a black T-shirt with the caption saying " Chuck Trained" or something witty like that. I'll post it on Pinterest or something. Thanks again!!! DGD 💥USMC💥

@WeaverLeatherSupply

2 жыл бұрын

Glad you love our videos, and that would be awesome on a T-shirt!

Thorough, confident, encouraging and relatable presentation. Many thanks.

Thank you for another wonderful video, Chuck! Always love to learn something new. As a suggestion for a future project, I would love to see an instructional video making a pair of leather boots. Hopefully not outside your wheelhouse!

@WeaverLeatherSupply

5 жыл бұрын

Thanks for the suggestion, we'll have to mull over this one! 👍

Sir, i really like to hear your explanation and your explanation kill my sleepy. 1000000👍👍👍👍👍 for ur vdo

Lots to be said for experience nice work Chuck just so happens I got to make one thanks 🤠👍

@WeaverLeatherSupply

5 жыл бұрын

Thanks so much, hope this will be helpful in making one!

Bic medium point, I love those pens

great video, thanks so much

I believe scabbards are made out Wood. When it made from leather it a sheath.

Hey, I love this project! I was wondering if you could go over how to trace for a cut out at the top of the shear? I tried doing my own, and only got it on one side so my dagger doesn’t go all the way in, could use some advice or a tutorial on how to measure for the cut in

nicely done

How did you know I wanted to learn how to do this, Chuck?! I know what my next project is....

Beautiful

@WeaverLeatherSupply

5 жыл бұрын

Thank you!

Dang it! Got the leather and the tools. Now i just have to buy a dagger and a sword. Guess it's only peanutbutter sandwich without the jelly for 2 months! Thank you Chuck!

Great job

@WeaverLeatherSupply

5 жыл бұрын

Thank you, Elton!

Nice tutorial! Thanks a lot!

@WeaverLeatherSupply

3 жыл бұрын

Thank you for watching!

Great tutorial for a sword scabbord. Now, need a 18c baldric or a baldric with a frog.

Loving the videos and the positive attitude, Chuck! Do you think the leather balm would hold up to the daily use in a restaurant setting (on a sheath for a chef's knife)? Or would something waterproof like resolene be a better option for that particular circumstance? Thanks for sharing all your crafting wisdom!

@WeaverLeatherSupply

5 жыл бұрын

Funny you should ask! A Chef’s Roll is on the list of future project videos. One of the most interesting things to me is watching a kitchen staff move. Truly amazing, unfortunately, that’s one of the places where my best input is to stay out of the way! Kitchens are wet and leather is porous, so, the Resolene is good, but, it’s impossible to get a finish on the top grain, edges, back, chisel/sewing holes…and water will always wick in somewhere. I may say go with (not a sales pitch but I know both work pretty well) the Bickmore Gard-More Water and Stain Repellant, or, the old school Snow Proof Original Waterproofing paste. We sell both and these will give the roll the best chance with liquids.

I really love this guy's enthusiasm, it makes me want to try this style of sheath for the next knife I make. I also really like these videos, because they show beginner leather smiths how to use their tools. (Ps. Is it leather Smith or something else?)

Fantastic video, still keep referring back to it. Do you need to allow more width for the turn with thicker leather (6/7 oz)?

take a drink every time chuck says thus far or very cool.

Fantastic video, Chuck! I'm curious how one could do this same technique but drop in some tooling into the design? Would you do the tooling, then bend and stitch? I realise something like Sheridan carving would distort around the edges, but could you avoid squashing something simpler while wet forming?

@WeaverLeatherSupply

5 жыл бұрын

I’m so happy you like the videos! This is a tough one. I’ve tried tooling after forming but the blade form it’s on just doesn’t give you enough backing. The few I’ve tooled or stamped have been a front side design only and, once molded, I’ve gone back and done some touch-up with the swivel, bevel and backgrounders. I wish I had a better answer for you. I love the look and shape of these but they just leave us with so few options to decorate. If you find a good way to go let me know!

I gotta make me one of these.

Would love to see a shoulder rig setup for a knife , 👍

Muy buen trabajo felicitaciones

@WeaverLeatherSupply

5 жыл бұрын

Gracias!

I enjoyed your video it has been very useful and informative. I have a quick question - would it be possible to make a scabbard with soft leather then harden the finished product, or is it better to harden the leather prior to making the scabbard

@WeaverLeatherSupply

4 жыл бұрын

Hi there, It would be better to form the scabbard and then harden it. I'm not sure what kind of leather you have that soft, but veg tan is going to be the only type of leather that you will be able to harden. Check out this video to see how Chuck hardens leather by baking it: kzread.info/dash/bejne/mqt7ucGqp9PeidY.html

If you place the button stud between the sheath and throat layers would it not be possible to use a thin aluminum plate between the layers with the screw one side of it and the throat layer on the other side of the plate. It seems to me that it would amount to a large washer that would strengthen that area of the sheath.

Neat!

Have you ever made any moccasin boots and what kind of leather is good to make them out of

Beautiful Project! What changes, if any, would you make to the scabbard if your Dagger was sharpened? I know a welt is added for a knife sheath to protect a side seam, but with this seam in the back, no need for that. Would you bump up the leather weight or will this weight hold up for a dagger sharpened on both edges? I'm thinking of a shorter dagger, legal length, of course. Thanks so much for your amazing videos, I'm always inspired!

@WeaverLeatherSupply

5 жыл бұрын

So glad you’re happy with the video! I’ve gotten this question several times and I am sorry to say that I only have two options. Sewing on both sides with a welt is great, ample options for decorating, is easy to line up, easy to add multiple colors, stamps, and tools without issue…but, that makes the scabbard almost 50% wider in many cases. The width, to me and it sounds like to you, just makes the scabbard too wide and if that’s not the way you want to go then a full or side only insert with a material like Kydex may work (haven’t tried this yet). These would glue in pretty well and can mold down to fit the bends in the scabbard. Another option is a wooden scabbard with a leather overlay. The wood form is pretty easy to make with a jigsaw, plywood and a good rasp and it doesn’t have to look great, the leather will cover it. This also has some good options for multiple colors, spots, lacing… See if any of this helps?

@yayaglass

5 жыл бұрын

@@WeaverLeatherSupply Thanks so much. Yes, I didn't want to widen the scabbard and I like the look of this back seam. I'm going to add a Bronze tip and decorative band at the hilt. I think I'll try the Kydex first, in a simple knife sheath with the back seam, and I'm pushing it further, using a more supple leather than I've used for any other sheath, just to really give that Kydex a test. Why not? Have you made a vid about the holder for the sheath? Again, thank you for your amazing vids, it's a pleasure to get that notification!

Love the video I do have a question. I would like to try to have the main body a contrasting color from the throat and the tip, would it be possible to dye them before gluing together?

@WeaverLeatherSupply

8 ай бұрын

yes, absolutely!

Chuck, interesting point about “FROGS” . In the Steel business they make a “FROG” which is a steel an electric switch that’s used on Railroad Tracks to switch a rolling train from one track to another track. I guess you need to get your “FROGS” straight! Richard

What dagger it this, I love it's overall aesthetics and purity

If I wanted to make the throat and tip a different color than the body, are there any tips for that? I've heard wet forming after dying doesn't work out so well

A question I have about the wool dabers. Can they be reused if you wash them out or are they one use and done?

@WeaverLeatherSupply

4 жыл бұрын

HI there, You can wash them out if you want - I just wouldn't use a dauber that was used with black dye on a lighter colored dye next time in case there's still any black dye left in the wool. Hope that helps!

Tried to make a english sword scabbard (the mortuary version that is looking like a musketter version) Struggled so much for three weeks and finally stumbled on your video. All that i tough i knew was blown away. But i do have a problem. I want a wood core in the middle and obviously i fear i might break the core by pressing it or cannot place the wood core once the leather is stitched and wet) Do you have an idea for that? I carved in white pine wood since its a soft wood.

@WeaverLeatherSupply

5 жыл бұрын

Louis-Phillipe Thanks for sending in a question! Leather covered wood scabbards can be beautiful! I haven’t made one but have seen a production shop doing it so I can offer some advice. The way I’ve seen these made, most often, is to cover the wood with a lightweight garment leather (usually chrome). This allows you to go with some beautiful colors, combinations of colors and prints if you find a good one. For the veg I may suggest wetting the leather, forming into the scabbard and, once dry, use contact cement to attach the leather. I may not add glue right to the edge so you can lift the edge with the chisel holes and sew that down. The stitch will be mostly for looks since the leather is glued on and no real pressure is involved. See if this answers your question?

@louisphildurand

5 жыл бұрын

@@WeaverLeatherSupply Thank you for your answer. Since i am quite an amateur (let's just say i am completely new to this but oh the love is real) I tried this first step you are inquiring. I got the corkscrew effect on both tries but didn't used glue yet for this. With your way of showing how to measure i think this might work now. Practice makes perfect they say. I hope i will have a chance to show you the result when its done. I will continue watching your videos. They are well explained form A to Z.

What kind of leather is good for moccasin boots and have you ever made any

I LOVE when people give MEASUREMENTS in a tutorial! Sadly rare these days.

@osvaldomedina2300

4 жыл бұрын

Because all daggers are the same? cx He shows you how to design it for YOUR DAGGER/sword. He explained why he add size for bends/spine/leather thickness. The one part that different is your initial trace of the dagger

@rootvalue

3 жыл бұрын

You should not use measurements as a replacement for offering parts to one another, nor as a substitute for a craftsperson’s voice.

Will this work on a tanto style dagger?

Loving it as always Chuck. I'm a Fiebings guy myself, tried a few other brands and results aren't quite as satisfying. Couple questions about the scabbard. Got a claymore that could use a new scabbard; Steep guard and deep plunge (3-3 1/2) on the inset (mirrored both sides of the blade). Would this be a problem with this form of scabbard? Second, curing on scabbards, yes or no?

@WeaverLeatherSupply

5 жыл бұрын

Hi Jason, The claymore with the barbs is tough but, without, I don’t think the deep inset will be an issue if it’s measured pretty well, and, the outside edges can be rounded a bit to allow for the deep angle on the guard. It may be a good idea to just make about 5” of throat as an experiment and see how that fits and holds up. This will really give you the chance for a good measurement with a pretty tight fit. I have never baked a scabbard. It should work nicely (if you have a big oven), but, one of the things a leather scabbard has over a wood scabbard is that it can bend without breaking and hardening it may crack if it’s ever bent hard. I have stepped on a few scabbards, sat on a few…and a wood one would have been destroyed but the leather is no issue. I hope this helps!

@Rkurnelm

5 жыл бұрын

Great thank you. Working on a new style of bracers and then a helmet (think i may have figured out how to get one made). After that I should be able to get started on the sheath.

@WeaverLeatherSupply

5 жыл бұрын

@@Rkurnelm you're welcome! Sounds like a cool project!

hey chuck, if you had to tool this, how would you do that?

That's a splendid dagger. Link to maker? Lovely scabbard...

@filstewart2380

3 жыл бұрын

And hey - 48 minutes of instruction - let's see more at this length please. Thanks Chuck.

@WeaverLeatherSupply

3 жыл бұрын

Hi Fil, Got this one from Museum Replicas, LTD in Conyers, GA.

How would you adjust this pattern if you have a guard that comes down? I understand how to adjust it for a side sewn scabbard but not for this type

:26 "On that point..." I see what you did there 😎

Using Imperial measurments - very traditional ;}

@Senzeni

3 жыл бұрын

Ikr Now we need the same video but in European paces.

Love these videos keep them up. Break the fingers of the guy pounding in the back ground

Back in the middle ages what did they use for gluing leather? Square knot is left over right and under then right over left and under. That's how I remembered it anyway.

@WeaverLeatherSupply

4 жыл бұрын

I’m not really sure. Glue made from horse hooves is an old school glue but I don’t know how far that goes back. Cool question! I would love to know (it’s’ probably some very gross recipe!)

@inspectorsteve2287

4 жыл бұрын

@@WeaverLeatherSupply I would imagine the recipes were pretty gross back then but I'm sure they worked really well.

@digitaliproductions

4 жыл бұрын

I'm guessing they probably used some combination of a pine-tar and hoof or hide glue, or possibly bitumen (asphalt) from a petroleum seep or tar pit. Those methods go back to pyramid times.

@inspectorsteve2287

4 жыл бұрын

@@digitaliproductions that makes sense. Thanks.

8:27 You can add a leather washer behind the rivet that is still on the inside of the liner and install it so that the inside has no metal. Then you have strength and craftsmanship.

For the top of the scabbard. I would actually wet form the leather for button.

Without a welt, doesn't the blade cut into the leather?

Do leather scabbard’s shrink? Because I made a black semi basic scabbard for a Spaniard rapier two years ago and it appears that it shrunk in size. How would I stretch it close to how it was?

@WeaverLeatherSupply

Жыл бұрын

They shouldn’t shrink, not sure what’s going on there. Not knowing if it’s a side sewn or traditional it’s hard to make a call. It may be possible to re-wet the scabbard (if it’s a veg). If you could email us some more information that would be great. Send to: retail@weaverleather.com ... What is the tannage and construction type? Photos would be helpful too!