Good

Good job.

@WoodArtStudio1

4 жыл бұрын

Thanks John.. the one of my future video should be filmed at your shop.. :) My goal is to travel and shoot video at all different shops in America.. ^^

Thanks for another good one Taeho!!

@WoodArtStudio1

4 жыл бұрын

Thanks for watching..

예술이네요 ㅎㅎ 유튜브 시작하신 것 축하드립니다 동병상련의 마음으로~

@WoodArtStudio1

4 жыл бұрын

감사합니다. ^^ 저도 축하드립니다.. ^^

@letsdiy9521

4 жыл бұрын

@@WoodArtStudio1 감사합니다 실례가 안된다면 질문좀 드려봅니다 Wood Art Studio님 영상 접속자가 해외에서 많이 되는 것 같은데 혹시 특별한 설정방법이 있으면 조언좀 부탁드립니다 ㅎㅎ

@WoodArtStudio1

4 жыл бұрын

@@letsdiy9521 특별히 하는건 없는데요.. 혹시 제가 미국에서 살고 있기때문 일수도.. Tag 을 영어로 하시면 조금 나지 않을까요.. ^^

@letsdiy9521

4 жыл бұрын

@@WoodArtStudio1 아.. 미국에 계시는군요.. 답변 감사합니다 ㅎㅎ

Thanks for another great video! I'm assuming that you trust the parallelness of the rails and squareness of the triangle. If there's some question on those, would you recommend a squaring method for the back fence (and subsequently the miters) with something like William Ng's five cut method?

@WoodArtStudio1

4 жыл бұрын

Yes, parallel to the blade. this method can work for the cross cut sled also. In my opinion, William has one of the best method in making cross cut sled which partially came from European sliding saw method. But, only downside for this method is time consuming (at least to me..). I've made my cross cut sled with the same method as in this video and its accuracy is under .002 of inch. I came up with this method trying to get my inside corner aligned perfectly center to the blade.

What was the level and clamps for? I bet I missed something simple.

@WoodArtStudio1

3 жыл бұрын

Hey Jim, sorry for the late reply. The level and clamps are for holding the fence straight as possible during attaching screws.

@jimw544

3 жыл бұрын

@@WoodArtStudio1 Ah ha! Told you I missed something simple. :)

Please show us that holster you’re wearing. I don’t care for aprons because the pockets fill up with sawdust. Can’t put my pencil behind my ear because my ears are too big - the pencil just falls out. I end up just holding a pencil in my mouth or setting it down only to have to fiddle around to find where I set it down.

@WoodArtStudio1

3 жыл бұрын

The holster is used in woodworking programs in Cerritos College in CA. I'm going to start selling on my website soon. At meanwhile, you can purchase at wnwoodworkingschool.com/

@oldyeller9849

3 жыл бұрын

@@WoodArtStudio1 Thanks!

@WoodArtStudio1

3 жыл бұрын

@@oldyeller9849 🙏👍👍

hello tell me wat is the measureing device that wood art is useing i see a lot if people useing them i need one thanks eddie

@WoodArtStudio1

2 жыл бұрын

Hi, it's Incra's T-Rule. Sorry for the late response...