Making a Linear Bearing Block for Screenprint Squeegee Arm
Today I'm upgrading my squeegee arm by replacing the linear bearing blocks with a diy version using 6000 series bearing.
0:00 Machining the aluminum linear bearing block
0:23 Using 3D Printed jig for mark-making
0:46 Putting together the bearing block
1:32 3D Printed bearing block vs Aluminium bearing block
3:02 Results
Linear Bearing Block Fusion 360 Tutorial - • Designing a Bearing Bl...
💚 Support me 💚
Patreon - / thisdesignedthat
---------
GEAR USED:
BEST CAMERA UNDER $1K (US) amzn.to/2GpRCIw | (UK) amzn.to/2Xg7dOo
FAV LOW LIGHT LENS: (US) amzn.to/2QT7aJ5 | (UK) amzn.to/2v7HbRr
FAV MACRO LENS: (US) amzn.to/2VcOa6O | (UK) amzn.to/2V12pPA
GOOD VLOG MIC: (US) amzn.to/2Sdr12I | (UK) amzn.to/2DfVyHU
AMAZING LOW COST LIGHT: (US) amzn.to/2ElMJxg | (UK) amzn.to/2v8A23u
120CM QUICK SETUP SOFTBOX: (US) amzn.to/2IAOBDf | (UK) amzn.to/2F6jcrd
Пікірлер: 31
Beautiful work, mate!! I've scratch-built a couple printing presses, scoured the internet for plans and designs, few and far. Yours is gorgeous. Well done 👏
So clever, thank you.
MPCNC uses a very similar bearing block that might be worth copying if people don't have access to a metal grade cnc.
@ThisDesignedThat
2 жыл бұрын
Yes thats where I got the inspiration from :)
Very cool build ! I went through the same problem with my build. I can send you some picture of the clever and simple mechanism from my actual industrial table if you need.
@ThisDesignedThat
Жыл бұрын
Ohh yes please that would be great
@jacqueslopez
Жыл бұрын
@@ThisDesignedThat i sended you some on Instagram
Flipped 90 that print would probably have held up just fine. :)
@ThisDesignedThat
Жыл бұрын
Yes agreed, i should have printed it that way
4:3 you can fill it with epoxy or cement to make it Rigid .
@ThisDesignedThat
Жыл бұрын
Yes I've reinforced with epoxy previously, it works very well, but some reason i didnt do it for this project.
Hey just a little information if you want to make that a little more rigid if you wanna spray it with foam and let it expand but you want to let the phone run out the top for five or six seconds longer so you get rid of any kind of air that might be inside but that should make it more rigid I think of you as a close cell foam it'll work out really nice for those thin rods
@ThisDesignedThat
Жыл бұрын
thanks for the tips Frank
Noce work 😁FYI the 3d printed Part was very weak because of your printing direction. 3d printed Part are strong in the xy axis in the Z axis are they accurate bit weak
👏👏👏😍
have you tried making linear blocks that have 100% infill with the 3D printer?
@ThisDesignedThat
2 жыл бұрын
nope, i remember watching a cnckitchen video showing that anything over 50% wasnt really worth it and more walls was actually more beneficial, but i might be wrong
Need 8 bearing block, in aluminium, without bearings, is there any way to buy only blocks? Thanks in advance :)
@ThisDesignedThat
Жыл бұрын
Going to be costly because of the amount of aluminum you need. Maybe you could send drawings to a local machine shop and a local machinist
Why don't you use SCXXUU bearing, I mean what is technically beneficial to use self made bearing, Is it only cost effective or other benefit as well.
@ThisDesignedThat
Жыл бұрын
Hi Sandip, i think i talked about why these dont work too well in this application. The small bearings dont help create a smooth movement across the rod. the larger bearings seem to roll easier
There's just a boatload of torque being applied through that arm.
@ThisDesignedThat
Жыл бұрын
indeed, i completely underestimated how much would go through it
Print mechanical parts with abs
Hello ❤
@ThisDesignedThat
3 ай бұрын
Hello 😊
Good idea, but maybe much more expensive to manufacture and cumbersome to install than buying linear bearings that are already on the market...
@ThisDesignedThat
Жыл бұрын
True, but bearing blocks are also expensive when you go up in size and this diy version performed better for this application due to the larger size of the bearing diameter
@aryapzh6691
Жыл бұрын
@@ThisDesignedThat Got it... Keep exploring...👍
buhhh no precision,, any tolerance tests?
Плохо искал. Вот тебе первые попавшиеся ссылки: kzread.info/dash/bejne/ZK2CpdurZqjHgrw.html kzread.info/dash/bejne/mIZ5o5aFfdbJqs4.html