Wow! Stunning, absolutely stunning. Your leather working skills amaze me. I really love leather, I only have a few pieces, but they are very gorgeous. I appreciate your handy work.

Workmanship of the Highest Order!!,Superb!!

That was incredible!!! Amazing design, execution and craftsmanship!!!!

Beautiful! Such care and precision. ❤️

Absolutely beautiful craftsmanship. You've inspired me to start leather crafting again! And you definitely have a new subscriber!

Thank you for posting this video. Outstanding workmanship!!

Master piece!!!.... totally amazing

Work of art... congratulations!🎉

Excellent workmanship, thanks for the tips

This is what quality leather work is supposed to look like. Every step on this process was done, in my opinion, properly and with care.

@CurrentElectrical

6 жыл бұрын

Except for the use of the stitching iron, I agree. The iron is simply for marking, a chisel on the other hand is the way that the uploader used it. ;)

@HonestDoubter

6 жыл бұрын

The Modifier - I hear that. I think on 3 ounce leather - which that looked like - it would have been tough to stop short of going through.

Those cards are gonna be happy 😊

beautiful piece.

Perfect job!

absolutely impressive man.

Very nice video and detailed work. Keep it up. What kind of sprayer did you use?

Impecable!!! Trabajo!!! Desde Sgo.del Estero.Argentina!!!!

You do a really good job.!!

Damn, so many tools, I will make a list of the "Not vital tools" and make my second order, I will try a case like that. Thank you for this tuto !

This makes an excellent unintentional ASMR video 😍

This is so incredible. Would you be willing to do a commissioned box with special dimensions specifically for another deck of cards? The cards I had in mind were a little thinner and taller so I'm not sure if its possible. (It would be for a dear friend of mine, and this deck is very special to her.) I'm going through your etsy shop and seriously, your craftsmanship is just so above and beyond!!

@KiLeatherworks

6 жыл бұрын

I`m glad to hear that you like my stuff, Ariel ! :) Of course, I can do a new one box as you wish :) please contact me by my Etsy store or by an email igor.kazibudzki@gmail.com Take care! :)

very good work, congratulaions! I'm learning how to make leathercrafts in youtube, and your's videos helped me a lot, tks bro!

@redwolf2901

4 жыл бұрын

C H how’s your leather craft going, just started myself, finding bevelling difficult, just seems to be muddying my lines, any tips?

Great work! May I ask what type of airbrush system and compressor do you use? Thanks. 😊

Awesome job.

Very NICE job - you gave me a couple of ideas for my next project! Can I make a couple of recommendations for your next video? Firstly, consider adding music - it makes the video more enjoyable (I think), and secondly consider adding notes or commentary to explain which tools you are using?

Maravilloso, excelente el trabajo, Dios a Bendecido tus manos felicitaciones,

Excellent work

Hello, very nice work, I would like to clarify where you can buy such a castle, thank you in advance?

Impressive, good work. Will it fit sleeved cards?

This is inspiring.

Wow! I loved this...can I ask how long this project took?

Nice job!

amazing , more videos pls

What is the name of the buckle that you have used? Thank you.

Awesome, was looking for some way of making a leather insert for a couple of pockets on my work vest but wasn't sure how to stitch up the sides without compromising the space in side the pocket it was going in You've come through again youtube

What's the name of the tool you used to trench the leather at 7:52 to bend it flush around the block? I am looking for one but i don't know the name of it.

What is that tool that you use to draw the radial corners?

What is that round tool with all the circles called?

What is that tool you are using with all the circle ?

very nice thank you :-)

Perfecto me a encantado

This video just blew my fucking mind, well done sir

Это просто шедевр.Класс.Супер.

very well done but maybe stain the inside of the flap as you can see bare leather when its done up

Id like to see you try and get your tarot or playing cards out of that now. It all looks nice and all but you didnt think more into it, you shouldve either cut a half circle on both sides where you sewed your gussets on or a semi circle on the front flap so you have a way to get your fingers into the pouch and easily pull out your deck of cards. So either put your half circles on both sides or just the one on the front flap to be able to hold onto them some how to pull them out of the case. Or better yet if the block you used to make the pouch and mold your leather to is the exact same size as your cards its going to be a very tight fit for your cards especially when you start adding your hardware like your rivets and I hope you didnt use open split rivets for if you did and the flared openings are on the inside of your pouch they will dig into or cut your cards up. When adding hardware to something like this you need to not only allow enough space to be able to pull them out or put them in easily but without damaging them on the hardware for the rivets over time will rub on whatever you put in it and will cause rubbed bald spots. So you always want to leave yourself a little more room to allow for how tight it will be to put anything into the pouch and a lil more room for the hardware. I always leave about another eighth inch in width etc to allow for the hardware to avoid them from ripping or tearing into the box or the cards.

Muy bueno gracias

Great work, thanks for the info and tricks. tbh though I did run your video at 2x speed.

Great job mister

Do you have a list of tools used

Do you accept orders to make a custom box like this with a slight different dimension for my walkman?

Do you have a pattern for this cigarette if so where can I get it

Thank you. What kind of glue do you use?

@pozaszlakiem3376

4 жыл бұрын

www.ebay.co.uk/i/183778061918?chn=ps&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&itemid=183778061918&targetid=879043638628&device=c&mktype=pla&googleloc=1006507&poi=&campaignid=9455575137&mkgroupid=94880575894&rlsatarget=pla-879043638628&abcId=1139576&merchantid=114931221&gclid=CjwKCAjwvtX0BRAFEiwAGWJyZKgwLVY1rtkZB13D2TyTcXVhkFAqhyam0XCiSqTUgV9lUr1FsSXwOxoCUMAQAvD_BwE

Belo trabalho

Gdzie kupiłeś krzywik ?

hello would you sell the pattern for the box? thanks!

Great work can I have the pattern ?

VONITO LINDO GOOD 👍👍👍👍👍👍👍👍👍👍💜💛💚💙💚💛💜

waiting for your new works

whats that closure thingy? how is it called and where I can find it

@dudediva69

6 жыл бұрын

Bag Clasps & Closures www.ebay.com/itm/Swing-Bag-Clasp-With-Rivets-For-Closure-chest-Suitcase-Bag-Buckles-Purse-Boxes/371928111105?hash=item5698a49801%3Am%3AmxXRD3inQdmPXXdVXaWYjag&var=640872951192&_sacat=0&_nkw=Bag+Clasps+%26+Closures&_from=R40&rt=nc&_trksid=m570.l1313

Hi! May i know what kind of glue use use?! And what's that black liquid you used in last to cover the edges?

@pozaszlakiem3376

4 жыл бұрын

www.ebay.co.uk/i/183778061918?chn=ps&norover=1&mkevt=1&mkrid=710-134428-41853-0&mkcid=2&itemid=183778061918&targetid=879043638628&device=c&mktype=pla&googleloc=1006507&poi=&campaignid=9455575137&mkgroupid=94880575894&rlsatarget=pla-879043638628&abcId=1139576&merchantid=114931221&gclid=CjwKCAjwvtX0BRAFEiwAGWJyZKgwLVY1rtkZB13D2TyTcXVhkFAqhyam0XCiSqTUgV9lUr1FsSXwOxoCUMAQAvD_BwE

super

genial

wooooooow

Hi there! I recently bought your pattern and I’m excited to get into it - can you tell me what the tool is that you use to cut your fold creases?

@KiLeatherworks

Жыл бұрын

Hello! :) I`m glad to hear that you`ve chosen my pattern! :) Regarding your question - I used the gouge tool. I hope you`ll have a lot of fun making this box! Regards, Igor

@cnahai84

Жыл бұрын

@@KiLeatherworks thank you! That’s exactly what I was looking for!

изумительно!!!!!!

can i by this ?/

Cool. Steampunk.

Hardware info?

What size is that gouge tool at 6.50?

@KiLeatherworks

6 жыл бұрын

it`s very old chisel used for wood. Anyway it has 5 mm width :)

@Allujallu

6 жыл бұрын

KiLeatherworks oka thanks! Yeah i was just wondering wat is a good width for a chisel when making foldings :))

@kcrubber

6 жыл бұрын

You can also get a v gouge at any leather crafting place that will do the same thing

I do wish there was a verbal walkthrough in addition... not just watching without details.

فنان

What thickness did you use?

@KiLeatherworks

Жыл бұрын

2.0 mm for the main part and 1.5 mm for sides :)

@codyball3329

Жыл бұрын

@@KiLeatherworks thank you

3:46 what is that tool name?

@franticc

4 жыл бұрын

this is beveler stamp :)

@heinnyi309

4 жыл бұрын

@@franticc thank you 😇

ZA WARUDO

Only two videos? Come on mate I need more inspiration please.

S a l o m o n sliman larach good dezayner 11 ,11

Чё по лаврухе?.. Где такую заказаиь можно, женские есть?!

Bello ma quanto e lungo la pelle

You really should talk about what you are doing at each step. Sometimes your hands are in the way, it’s impossible to see what you’re doing. And you didn’t show anything at the beginning about measurements. If I want this to fit something in particular, I’d need to measure and allow something for how tightly or loosely it fits. Sorry, don’t mean to be a downer. Hope you can learn from this.

@swlb2

3 ай бұрын

Late reply here, but if you're looking for the measurements, he sells a pdf of the pattern and measurements on Etsy. Most likely why he does not give measurements here. He has a link to his shop and this exact box in the video description.