I swear to god, im physically not able to do these helmets, but everytime I see you happy on the thumbnail i instantly click just to see you talk about something you love

@TacticalBarista

4 жыл бұрын

Just try! You can actually do it! I printed two halves of it already, you can also buy them from him!

Hey can you do a sergeant hound helmet I think that would be cool.

@and7thecandyman859

4 жыл бұрын

I agree please do this!

@sirschleck-alot2140

4 жыл бұрын

Fuck yeah we need a Hound helmet

@commanderthorn7525

4 жыл бұрын

Yes

@pilots1015

3 жыл бұрын

Yes that would be a great helmet to do.

@noahreimer8906

3 жыл бұрын

Please do this

I haven’t even finished the video but I already know it’s gonna be great.

I love this clone helmet...

I'm making a commander gree helmet at home so I might make this one aswell

@Loganhundred

4 жыл бұрын

Me too, the chrome paint is drying right now

@hopliteoperator

4 жыл бұрын

How’s the project going so far ?

@gonkdroid7207

4 жыл бұрын

Mine is going well so far

@ChevyYenko

4 жыл бұрын

Which one phase one phase two or phase two kashyyk

@gonkdroid7207

4 жыл бұрын

Phase two

When I look at where you started, it's absolutely amazing, the new intro is awesome the quality is getting better and better, the helmets are getting more and more awesome ! Great Job !

212th recon division trooper helmet

@zachbishop6980

4 жыл бұрын

YESSSS

@crbrus6916

4 жыл бұрын

omg yes!

@AmgosrPig4384

4 жыл бұрын

Yes

@tomskowski6239

4 жыл бұрын

Attack battalion*

@leoissad8971

4 жыл бұрын

@@tomskowski6239 the 212th recon division is a subsection of the 212th attack battalion seen on the second battle of geonosis

Oh, yes! Galactic Armory back at it again. I always look forward to your videos, your work is amazing man! By the way, I'm waiting for my new 3D printer and I'm gonna start making helmets by your tutorials right away. So thank you for inspiring me on that!

@andrewperrault5775

4 жыл бұрын

Hey same! Which printer?

@BlatantlySwedishPGN

4 жыл бұрын

@@andrewperrault5775 I've ordered a Sidewinder X1 since it's the same size as the CR-10, giving me room for these large prints.

@andrewperrault5775

4 жыл бұрын

The Battlefrontier, nice, I went with the Prusa Mini, so I wil have to split them up more, but it seemed more reliable

@BlatantlySwedishPGN

4 жыл бұрын

@@andrewperrault5775 Yeah, it probably is. Prusa is a good choice, though they are a little expensive for me and don't have the build volume I want.

Dude they just keep getting better

You should do an imperial scout trooper helmet. It would be a cool addition, and it would be fresh, because nobody does those helmets

I just bought these files from his store and I’m currently working on my first 3D printed armor set! Cant thank this man enough!

Nice! Thanks for these vids, it's a big help for my Mandalorian build! For the visor, I recommend Kalevala visors. They have lots of colors. They're also reflective, so nobody can see your eyes!

It's Purge Trooper time. Also these videos are a massive help. Thank you.

dude, I bought a 3D printer after watching a bunch of your videos, best decision ever

Love your vids. I just finished a mando helmet, working on a full suit of CT armor now, all thanks to your videos.

Another great video! I have been using your files to print out my own clone armor. Thank you for the inspiration to work on this project.

Hello, galactic armory, i just wanna say your a big influence and i love your videos, keep going, and stay safe.

Man you're videos are awesome, I recently got a 3d printer and have been using your method for some Halo helmets, and currently a mandalorian suit. I also have gotten several of your files from your site which are great! Keep up the good work, a keep making clone wars gear!

This makes me want to start 3d printing so much, but its so expenseive. I dream of making my own Clone armor

@abrahamashley4146

4 жыл бұрын

same

@ryeguy7941

2 жыл бұрын

Me too

Looks great!

Ive gotta say, amazing build. It's also really refreshing to hear people talk about how anyone can make things and not gatepost things. Anyways, great job :)

Thank you so much! I am working on a 3d printed Shadow scout and this helps me a lot with the helmet

Looks awesome can't wait to try and make it

Awesome 👍🥰 Just got mine printed and assembled couple of weeks ago! Thanks to your files ❤️

I have yet to make anything posted on this channel but decided to subscribe because the GA is such a great teacher and motivational speaker. Quality stuff!

Wow looks good!

Great video. This will be a fine addition to my colection!

I am so excited to start printing!

List of recommendations: 1. Phase I Captain Rex Helmet 2. Phase II 332nd/212th/501st Mashup Helmet (To symbolize the friendship of Ahsoka Tano, Obi-Wan Kenobi, and Anakin Skywalker.) 3. Phase II Coruscsaunt Guard Helmet

You know this guy is the man, he never fails like you watch other people doing this and they tell you everything you don’t have and like stuff that is ridiculous expensive but this dude makes things simple and makes some of the best helmets ever.

Heating the plastic visor with a heatgun makes it easy to bend

Great vid thanks for inspiring me to make clone trooper helmets 🙂🙂

I use tin-snips to cut my visors, they are made for cutting thin metal and it works really well!

This is my all time favourite Clone Trooper armour

Working on an entire arc trooper jesse suit using your files. Man you are great.

Dude I been waiting for this video for months and dude it was worth it because you did a amazing job man movie accurate.

The camo paint looks very cool, I am still waiting for my printer to arrive in the mail, shipping is a bit delayed. I am thinking I am going to make one of the Asohka helmets from season 7 of CW, very excited to start 3d printing and making helmets. I would like to make full armor but that is going to be a long project if I go through with it

I KNEW IT I SAW IT IN THE BACKGROUND OF YOUR LAST VID YES I KNEW!

Wow it look really awesome!!

Your videos r super cool you just make great clone helmets I watch your vids over and over cuz they r dope

I bet a dremel tool would have worked well for cutting that bugger visor!

I think a death trooper would be a cool one to make and the painting should be quite quick as it's mostly black. Love your work! 👍

I saw that umbra arc trooper helmet on the ground in the grass out side when you were sanding the helmet. I was worried that they were out of stock and would never return. I have almost earned $120 doing yard work so I can purchase that umbra helmet. I am so excited!

Could you please do a tutorial on how to attach the ARC Trooper upgrades to phase 2 armour

Great video I am getting my 3D Printer at the end of this month cannot wait to start to make my own helmets

Amazing work once again!

Beautiful 42st recon helmet!!!

Oh, you should do the Coruscant Underworld Police helmet! I always loved those!

Amazing build as always! Would you be doing a Death Trooper helmet/full armor build any time soon??

LOVE the build man. One day Ill have my own trooper armor. Also try using a dremel tool when cutting through thick plastic.

Bardzo fajnie i pieknie wyszedl ci ten helm, wiele pewnie pracy w to wlozyles i trudu aby efekt byl wspanialy

You’re realy good at this not gonna lie

Love this video keep up the great work

i know this stuff takes a lot of material good job and keep up the hard work

@GalacticArmory

4 жыл бұрын

Thank you!

I ordered one of your animated clone commander helmets to make foxes helmet i love your videos so much thank you for making them

I just discovered your channel here, but a customer just brought me your Clone Paratrooper kit that i converted to a Purgetrooper helmet. Great work and a sturdy helmet.

thank you for inspiring me to 3d print I am working on Mando armor with your files

You could use a Dremel with a cut off wheel with a little drum sander they were excellent For cutting out hearts especially thick plastic like your visor.

I ordered my 3d printer a while ago, it should ship tomorrow and I’ll be well in my way to making my own buckets!

He’s back again boys!

oh wow i used the same visor when i did mine haha! What i did was I flattened it by putting it in the oven on a cookie sheet on both sides and put a brick ontop to hold it down. it took a while but eventually it got flat.

Excellent helmet and video. Natural sponges for painting can give random appearance in future efforts.

Wow great job dude

Nice!! really enjoyed watching this video I have learnt allot, thanks for sharing! :-)

yo that looks sick

my 3d printer should be coming this weekend so im very excited for that

You should make a Shoretrooper helmet, love your work keep it up.

I like your videos and your helmets all look very good I watch all of your videos👍

I love your videos. Keep it up.

Whenever I saw this helmet in the movies I always thought the visor was too high up for the clones to see out of it and after seeing you put it on it seems like I was right, but it still looks amazing

@Unchainedmaple888

4 жыл бұрын

For real, the visor is basically on their forehead

Looks incredible, also I was wondering if you could start making imperial armor as well?

Well, now this gonna be my new hobby, creating Star Wars helmet where it is very rare in my country to find one.😂 thank you for giving inspiration for me

You should do Commander Gregor, Commander Doom, or Commander Thorn helmets

Love it!

"we gonna start rotate it a bit" after the cut its like what 50 degree rotation XD "its pretty well flat" Love you man XD

Nice job Mate. Im working on a senate guard helmet at the moment you shoudl try one to lol.

some aviation sheers would have cut that nicely. beautiful helmet man

Oh it's beautiful

That is awesome dude:D

Dang that’s cool.

Definitely not enough recognition. This stuff is cool

Oh, it's beautiful

@groggysword33

3 жыл бұрын

Director.

Just made one from eva foam, not as accurate but still happy with it

Awesome!

A mandilorian helmet would be cool too especially just something basic that we can modify ourselves

Great job

You can use a rotary tool for the visors and for edging

Yo I love your work! I’m currently doing a Jesse arc trooper armor with your files!!! You should try and do an arf trooper that would be sick!

@GalacticArmory

4 жыл бұрын

Thank you! Yes, an ARF is on the list!

41st clone scout trooper

Great design! You should do Grees helmet to compliment it

I've printed many helmets and for some reason I'm always cheap about the amount of spot putty I use. I really need to follow your lead here and just basically dedicate a tube to a helmet. I'm always trying to do things cheaper and it usually bites me in the end. I use a lot of primer and putty is cheaper than primer so it makes sense to go heavier on the putty to save primer later.

With the camo ( it all depends on the colors) it’s better to start with your darker colors and do less of the light colors. So for that woodland camo it probably would’ve been easier to use a dark color first instead of the tan, because with the light colors you don’t want much of it. But the camo looks really really good though! I definitely like it a lot

YEEESSSS I LOVE THESE VIDEOS

0:13 hahahaha xD That was great! The first time I ever saw that helmet, I thought it was made for Brian from Family Guy :p Best wishes to you my friend!

Nice to see the tabs. Removes a lot of worry. Have you ever tried using the print bed as a hot plate to make the visor easier to shape?

@GalacticArmory

4 жыл бұрын

I haven't, I'm not sure it would get hot enough but maybe if I left the visor on there for 15 minutes it might work

Nice!

I can’t decide to get this one or not because this helmet has so much work

I looked at his store, and I saw high prices. If there were smaller prices or if it contained every single item that he used then I would buy it no doubt. Love ur vids though and can we see a video of the ARF trooper helmet from your store?

Yes!!!

YES!! pls upload more often

@juanmenguez7006

4 жыл бұрын

lucas delaroche th Ono that is difficoult to make the 3D printing

@calkestis5872

4 жыл бұрын

It takes alot of time to make these helmets