Best "how to" video I've ever seen. I've been making automatics for 40 years. What makes your video good is your honesty and understanding of geometric relationships in this seemingly simple little "machine". I've seen people make mistakes and not catch them or preform complex procedures for simple solutions. You're on the right track and your knives will be winners!

Wtf who would downvote this? This dudes an inspiration

@theplasticdesert2408

5 жыл бұрын

ww2 colorizer as of 25th September 2018, 33 morons did. Mind boggles I think it’s awesome.

@simsalim9890

4 жыл бұрын

Lot of parts for little project

Looks good. I plan to watch the whole series. Thanks for teaching.

Awesome stuff. Been away for a while and just catching up on some youtube video's I need to watch and seen this series. Super excited to watch the next installment. Love these types of videos. Great work Mike.

Rabbit! Good stuff. Learning mucho. The process matters as much as the product.

Perfect timing for me Mike, this is what I'm trying to learn and figure out.

@EkimKnives

8 жыл бұрын

Perfect for me too! We can learn together then as I am recording these as I go and figure it out. My goal is not only to have a knife I'm happy with at the end of this, but to have a bunch of makers out there making the leap into folders as well!

I really enjoyed his video. Thank you for including us in your "unfolding" journey. I look forward to each new installment.

@Emiliapocalypse

3 жыл бұрын

Haha that was clever! Good one, Lara 😄

Awesome vid. Love the blade shape of the diablo as well.

Looking forward to this folder series Mike!

@EkimKnives

8 жыл бұрын

Thanks Bruce! I hope it goes well. This is the first time that I'm just recording as I go and learning on screen.

Looks like you have a lot of talent. Hopefully you can get it figured out. I know expensive machinery would make life a lot easier. Personally, I'm nowhere near the point of even beginning to contemplate a CNC machine or something like that though lol... Take care and thanks for the vids

love that diablo flipper!

Hi Mike just found your channel , i recently started making knives... man can it be frustrating at time. Your design is looking awesome great job!!

God bless you, Mike.

Great videos bud....love em

Awesome man all the best. Just make sure you ship them to Australia!!!

Late to the game here but Alec mentioned your knife-making skills. Thumbs up and subbed. Keep up the great work.

Nice talk man, I'm making some knives myself with basically a home made forge, an anglegrinder, files and sandpaper. I just started making my first folder. I'm learning as I go and it's a lot of fun and a great challenge to overcome to make it work properly.

@lindboknifeandtool

2 жыл бұрын

Still working on folders?

Dear Mike, just a few thoughts on the stop pin track: When I built my first Flipper folder two years ago, under the insruction and help from the talented Czech knivemaker Milos Kislinger, we discussed the topic a while. Obviously, only two positions for the stop pin really matter, the closed stop and (more important) the location in the open / locked position. A tight fit in radius for those two positions helps to minimize wear on the stop pin or track (through more contact area you get minimized surface pressure). For the travel between those two relevant positions, a tight fit is not necessary at all, and as you already learned on the hard way, it likely causes trouble if the fit is too tight. So the easy way would be to drill/ream the two relevant positions with a tight tolerance for your stop pin and then mill out the track in between those two positions, with a noticeably oversized endmill. When you make sure to mill away only half of the boreholes (basically keeping a 49% half-moon untouched on each side of the track), the opened and closed position will be spot-on while the track in between is wide enough to avoid any unnecessary friction... Hope you get what I mean (it's hard to explain for me) and maybe this might even help you out to speed up production. Of course this is only one possible approach to compensate problematic tolerances in your machining equipment and it's possible that there are dozends of more elegant ways to solve the problem. Since you are a much more experienced and skilled knivemaker than I am, I'm sure you'll come up with a decent solution, soon. Best regards, Timo

@DerKaffeemann123

8 жыл бұрын

Seems like my comment above is mostly obsolete, I've just seen your #2 video from this series. As far as I understood, you're already doing it by the method that I'd suggest, apart from that it seems you dive into the previously drilled holes with the end-mill instead of leaving the ends of the boreholes untouched... So maybe just forget my comment... =)

We have the same issue with the tracks not being perfectly concentric with the pivot. One solution my father came up with was to use a jig that we can mount the knife handle to via the pivot pin. The handle will be free floating and pivot on the pivot pin but since the pin fit is tight it shouldn't rock back and forth. Now or maybe before you secure the handle down, put the blade on and locate the start of your arc path. Now you can manually swing the handle back and forth to make your arc in the handle. Set up some stop pins so that you can't over extend the arc on either side. So you don't need a rotary table or some fancy fixture. Just attach your handle to the fixture via pivot pin and limit the rotation somehow, this will be very repeatable. I hope I explained that well. I don't think you explained how you were cutting them now to make them repeatable so I figured I would offer this up. good luck, everything looks great.

@EkimKnives

8 жыл бұрын

Thank you very much Steve. I am currently using a rotary table but I did not have a digital readout on the mill. I went out and bought a cheap model which works pretty well and I was able to get much better results, Part 2 of this series is all about how I'm milling out the track for the stop pin. Hopefully that will give you a better idea about what I'm trying to explain here. The method you recommend is very similar to the method I used. Thank you for the help!

your work is awesome bro , big salute from KUWAIT

You might be one of the more fun knife makers to watch. Im gonna stay tuned in, just because of the Rabbit/ADD comment in your video. lol

Excellent as usual

Hey Mike thank you so much for the video! It helped me out allot! Question tho, what program do you use to print out your templates?

Wow a lot of back work

Mike great series idea---I'll definitely be following along. One off topic question, on your little tabletop bandsaw, what width blade do you run. I've got a similar sized Rikon bandsaw, and have a little difficulty following curves in a cut--someone told me it was easier to follow curves with a narrower blade--just trying to figure out what folks say who have one.Thanks--Don

Hey Mike, I don't know a thing about making knives but I have made 1000s of parts that had to be within .002 thousands and what we had to do was establish repeatabilyty. I don't know exactly what type of mill you have but if you set up your blades in your vice jaws have a stop set up on table making sure all your parts are exact. I mean to the .0001, precise. Instead of waiting for u to get money for a CNC maybe a lower cost Digital readout for your Mill would do the job. Course you're the boss that determines if u can mount a digital readout on your Mill. Hope you understand what I'm trying to explain. Like I said i never made a knife that's your Dept. Not judging at all, good luck. I enjoy your videos much...

@EkimKnives

8 жыл бұрын

I have a cheap grizzly mill with an equally cheap digital readout that works surprisingly well and was the best upgrade I ever got! Mix that with the fact that I'm no machinist and its no wonder the results I got were not what I was hoping for. I know it can be done, but with my current skill level on a manual mill, it has proven to be far more difficult and time consuming than I expected. I am however, eager to learn and I've noticed a significant increase in progress since I first bought the mill. Repeatability is by far the most challenging thing for me at the moment. Thanks for the help and for watching Joe!

that blade is sweet!!

The Diablo is beautiful 🇬🇧🙏🏼🙏🏼🙏🏼

I always like the perfectionist mindset

Please do the series, I live your vids and keep up the good work

@EkimKnives

8 жыл бұрын

Thank you! As of right now the series will continue. Episode number 2 is being edited right now!

Here's an idea. For the majority of the handle, use whatever material you're using. But for the locking section if the handle, cut away a portion if its thickness for a liner of the same thickness as the mill cuts are deep. That way, not only are bearing surfaces conceivably replaceable, but the entirety of lock mechanism paths could be cut for you by the "water jet guy." And if you're into the whole one-peice, eliminate unnecesary screws thing, the liner could slide into the rest of the handle and be prevented from sliding out by the one center axis pin. If the water jet cuts accurately enough, that's hours of hand cutting and human error eliminated, while maybe improving your wearing surfaces immensely. then you'd be able to spend your time doing fancy filework and checkering and stuff.

@robertkaschner1655

8 жыл бұрын

lol fuck. here i was imagining the pathway being cut into the handles all backwards and shit, with the blade just having a pin though it.

Thanks for your time, man!!!! Its hard brother..

The first thing that I noticed was...you are out of paper towels, sorry but I just couldn't help myself 😂...ok back to your video. I can't wait to watch this process and see how it is dome correctly.

Just a question have you tried getting your titanium locked up parts coded with the titanium nitrate .

Your out of paper mike! I really like you videos, Keep up the good work

@EkimKnives

8 жыл бұрын

Thank you for your support!

I just came across these videos and I have the itch to make one now. I know you were talking about geometry being a big part of whether the knife will work or not. Can you point me in the right direction to research this? My friend has a cnc I can use so I was planning on prototyping in aluminum first, but I'd like to spend most of my time prototyping in CAD instead of making something that doesn't work. Thanks!

By the way, I already signed up and I really like your videos, thank you.

Nice!

Good work! U make your own designs or is there a website for that? Kind regards

Hi Mike. My first view of any of your videos. The question that immediately hit me, while admiring your great looking knife design, was, why not do away with all of the needless, and not to mention weaker, pivot and locking mechanism and go to a lock back design?

@user-uf4lf2bp8t

4 жыл бұрын

Because its harder to play with a lockback

Looking forward to seeing the videos Mike ATB Mike #StayCornish😬

Do you use any software to design your knives and to check how they work?

This is a cool idea. I'm in, so you can count on me to follow your progress and successes.

@EkimKnives

8 жыл бұрын

Thank you very much!

I'm confident that you'll get it...instead of oooh squirrel you go oooh rabbit....also glad to see you fixed that thing we discussed in email..

@EkimKnives

8 жыл бұрын

Thanks Joseph for both your confidence in me and the assistance with that thing!

Great video. You can cnc a grizzly mill pretty easily. Not sure what mill u have.

I'm not sure how titanium brazes but you might be able to braze a steel face then mill to clean up

Congratulations your products are great. I would like to know what material the grips are made of if it is stainless or another metal. Thank you very much in advance, best regards, Luis Constantino

when you were talking about the stopping pins at 4 minute in i noticed you had them on both sides, why not just have it on one side, then it would be easier :)

Hey there! What i see from my position looks great! hope u keep going on and maybe a knife will make it's way to me to Germany! P.s.sry for my bad english Greetings Kai

@jurilamprecht3643

3 жыл бұрын

Hey anderer deutscher

What are the materials you use in the blade and handle? Appreciate your response thanks

Very nice

I just saw your video first time. I guess I am really late to the party and you have probably already got the nicer equipment, but there is a simple solution for people that don't yet have all the tools? get a piece of wood. mark a spot to drill for your pivot pin. then carefully measure and mark the distance to the center of your channel. drill a whole on your pivot pin mark. carefully clamp the wood on top of your drill press so that your drill bit is lined up with the mark for your channel. then put your knife blank on top of the wood and put the pivot pin through your blade into the pivot pin hole in the wood. now you are ready to start cutting the channel. only take off a small amount at a time or the chatter will push the drill bit out of position

I don't know if this will help but when I worked at spyderco we used to buff and polish the track, I guess it would help the blade from sticking....

@EkimKnives

8 жыл бұрын

I'm sure it wouldn't hurt to try it out. Thanks for the tip!

Building your own small CNC machine actually isn't difficult anymore. Idk if there's any exceptionally easy avenue to learn the stuff, but the parts required to be able to basically be able to plug right into your laptop are now readily available and not very expensive either.

Subscribed! Here from Alec Steele

Lock bar insert?

maybe you tried this but at roughly 6:00 you brought up the issue of the corners sticking in the lock up, why not round that corner where the stop bar doesn't need to engage? i may have misunderstood the issue as well.

As long as you have 2 points that wont move or your vice jaw that sets away from u ok, and make a stop that clamps to the table where u can slip ina blank exactly the same way every time. Lock everything down and use a edge finder to measure over exactly from the edge your measuring from to the edge of hold minus half the hole size to be exact. Use a exact reading set of calipers to measure U can get pretty exact if alls the same. Indicate the solid jaw make sure that is zeroed out. Solid jaw -= the jaw that does not move. Your doing great actually. Your pickey so u will do great.

Is it possible to make a liner lock knife without a CNC machine or milling machine?

@alcatrazmiller1364

7 жыл бұрын

yes, its possible. with a proper template and do careful adjustments. its possible.

Could you maybe try dying a piece of 1/8th inch round file and temporarily screwing in? It might be an easy way to bore out the track in a few minutes and save you from worrying about tolerances from the water jet.

@EkimKnives

8 жыл бұрын

The problem is the whole cutting setup I use is misaligned. I could get it to work, but at my skill level it just takes way too much time to get mediocre results with the machine I have.

Mike... Ekim knives.... Stanley Yelnats

Knew u were from NY!!! doesn't it suck knowing the knives u make can't even be carried in our state!!! I wanna get into knife making not really for business more for a hobby, why did u start with flippers and folders instead of fixed? Wouldn't fixed be easier? I'm new to your channel and maybe I missed the fixed blades anyway keep up the good work man happy to see fellow NYer making blades even if we can't "carry" em

@hellawellknives

6 жыл бұрын

he did start out with fixed blades. Watch any video before this one.

Hi Mike nisse idea for a video series. I am doing the same i am Michael from Someday tac and i love Yor videos so good Luck whit the folder

@EkimKnives

8 жыл бұрын

Thank you Michael! The series will go on for as long as it takes to get that folder done!

Do you have a template?

I would like a simpler one for beginners

Do you have a rotatary table for your milling machine?

@EkimKnives

8 жыл бұрын

Yes. I used it to mill out the stop pin track on the latest design its an 8 inch phase 2 from Enco.

@stevewelborn8744

8 жыл бұрын

Thanks for doing these type of vids.

@navyyvan7630

7 жыл бұрын

Ekim Knives

where can I talk about knife requests (orders)...?

Haha just keep swimming just keep swimming just keep swimming haha

@EkimKnives

8 жыл бұрын

you got that right! and that was a great movie lol

nice diablo

Hi Mike, I have a few points or more precisely questions I need to ask you. I'm a woodworker and more. You see how wordy I can get. Do you have an email where I can ask my questions ?

Sorry Nice

Please where are the templates ?!

Hello here from Brazil, could you send me a drawing so I can try to make it?

Where is this guy now??

i just found out that his knife brand is his name backwards

U absolutely need that readout, without it u couldn't do the close work U need. Do u have a school or community college u can take a short machinist class? Or find a machinist u can ask questions to close by, has to be some guy can show u stuff. I would if i was close. Just to teach u what I know

@EkimKnives

8 жыл бұрын

I wish there was a local class to learn this but unfortunately there are none near by. I almost took a job at a machine shop to learn the trade but I would be taking a massive pay cut that I just could not afford. I'm still keeping my eyes open to see if a class or better paying shop position pops up.

Hi man that one that works kinda would you sell it ? If so hit me up at my Facebook page Reeper Knives

Too much parts for little project

too much talk boy. but you really amazing..

Hey sir! Im very inspired but i need your templates please sir i wanna make one myself i really need it sir if you can please mail me or take your time to reply on my comment

I am sure that you will find good way to make it on stodoys Webpage.

*You talk a lot and do not see how the knife is made*

Please where are the templates ?!