Making a Dust Collection Hood for my Jointer/ Planer Combo
Ғылым және технология
This is making a dust hood for my Elektra Beckum HC 260 Jointer Planer.
If you like my work and this channel, you can support me here:
Patreon: / cosmasbauer
Instagram: / cosmasbauer
Пікірлер: 64
Das hat sich auf jeden Fall gelohnt. Danke fürs Zeigen
What an excellent 2 in 1 compact project. Congrats.
Very Clever young man. Thank you for producing videos.
Great build with fantastic results
Great addition to the machine!
Really nice job...I need to build one of those too...thanks for the inspiration!
Top design to be able to switch the hood for both tasks.
Nice job! You've inspired me to replace the useless factory hood on my Inca jointer/planer. Thanks!
Awesome! I’m going to try to adapt one for my Inca jointer/planer. It looks very similar to yours. Nice job.
Neat as always, Cosmas.
Excellent design and build for dual purpose use!
Excellent build. I made a similar, if somewhat cruder, version for my Inca machine. Although mine only works for the thicknesser, I'll have to have another go based on your design. Thanks.
Klasse geworden :) Man hätte die herumfliegenden hobelspäne aber auch gut mit einer laserschow in scene setzen können... dann macht hobeln spass... ...aber deine lösung ist natürlich auch nicht schlecht :)
Nicely done
Great case for dust!
Hi Cosmas.Amazing project again!!!.I would like a video with your drill press. Thanks a lot for your time.
Nice job taking care of your chip problem. May I ask where you got the awesome circle cutter?
Sehr gut gemacht, gefällt mir !
You should get some fire extinguishing plancket for protecting stuff when welding.
Nice job! Since I have almost the same machine (Baujahr 1984) I think I'll just follow your footsteps... Thanks.
Very nice! I have just acquired a similar machine (a 1981 HC260-E) which did come with a chip deflector but nothing close to what you've done here. Would you mind sharing the measurements, or perhaps even the .skp-file? I know, I could always take my own measurements but why reinvent the wheel when someone already made an awesome design job?
You can now find the same machine a bit improved under the logo of Metabo. Great videos!
A great video and a good solution, have used your concept for a similar planer that I have. It seems that you are allso missing the bar with a row of small anti-kickback hooks? (parts 164, 165, 166 on this diagram) Thank you for making good and relevant content!
Very impressive. Have you got a detailed drawing? I have the same planer/thicknesses with no chip duct and would like to copy your design.
I used to have a cheaper version of the same machine. Good to see you resolve the major flaw in the rise and fall handle design! ;-) Have you had any trouble with the drive belt for the feed rollers? I used to find misalignmemt between the pulleys would shred them but that may only apply to the cheaper Chinese clones.
Do you need to remove the one table in order to use the planer function I only ask because in the other units I have seen you do not and if you do not that would stop the chip from shooting up you would still need some kind of dust collection nice job on the one you built
I have an Inca 510 that is very similar. I think I will try making something like this!!
Thumbs up für den Bindan-Leim - uneingeschränkt empfehlenswert das Zeug :)
Hi there , thanks for your awesome videos. Been watching you for a few years now. I just bought this planer and mine also doesn't have a dust hood. Do you still have the plans for this dust hood ?
isn't the 2nd color you hated the famous "Wandel Green" :-) ?
@erikolson5271
6 жыл бұрын
It's awful close!
Welchen Kreisschneider verwendest Du in dem Video? Bist Du zufrieden? Bis zu welcher Größe kann man den einstellen? Wo kaufen? Was kostet der? Danke
Again a great video. I'd drill a hole and use two small pins, instead of welding the tube,but that's just my idea about it. The holes at the side will be a little difficult to close. What about some thick rubber "flaps" that just cover it loosely...? It would be enough to block the debris from flying out and it wouldn't interfere with the cutting roller.
Hi Cosmas, great build. I have just acquired this exact model machine. Are you able to let me have the plan?
I like DIY . Japanese oldman（72）you are meny meny ideas very very good！
DIE Hobelmaschine für den Keller. hatte die K und die M und bin nun bei der 4200 DNB mit schwarzen Tischen hängen geblieben. :) ich mag sie sehr.
Welch Kreisschneider benutzen sie? Schöne Grüße
Top vor allem auch ein Sicherheitsgewinn
Was für einem Sägeblatt hast du in deiner bandsage ? Ich hab mir ein 10mm Blatt gekauft und finde es viel zu groß
Cool!))
Geiles Teil
Excellent work Cosmas, but tell us what you've done with the second best German woodworker on KZread? ;)
Hallo Cosmas danke das du dir die Mühe gemacht hast ein Video zu machen. Ich würde mich freuen wenn du nicht schneller sprächen würdest :) aber so ist das ganz gut
No cutting head protection plate? Part number 168, on parts service. 9:35 You are talkin about this part?
Any chance of a copy of your plan?
Nice job with the hood. I am wondering about the fact that the machine came with the knives in sight and ready to grab clothing and or your skin. Seems like a safety problem that your hood solved. I have a planer and made a hood with plywood several years ago. Makes clean up almost non-existing.Nice job with the crank.. I have wanted a sander like the one you used on the welds for several years but all my purchases are for a need that will make me money and I haven't found that yet. The machine looks much safer now that the hood is there. The fact that it is double duty is another real great thing...
@Hellsong89
Жыл бұрын
You lower the blade guard on top to lowest position, well as have the feed table in place when running thickness side. Sure it hinders visibility a bit but its safer that way. This design other hand is really nice. If only he had released the plans for it, but thankfully one can see most of the dimensions at 0:46 and rest can be figured out based on machine and other dimensions.
Ну ниче, молодцом!!!
Sach mal, ist das normal bei der Elektra Beckum HC 260 Jointer Planer das man zum staerke hobeln dieschneid- rolle "schutzlos" ist? Ich mein ... da koennt man ja mit der hand reinkommen, komisches design. Oder wird normalerweise das teil, was du spaeter zum festhalten deiner "staub kappe" beim staerkefraesen hernimmst direkt ueber die schneid-rolle gesenkt? Saubre Arbeit an dem teil, wenn du es aber noch perfectionieren willst ... wuerde ich noch mittels einem brett die zug-spirale abdecken, damit nur die schneid-rolle in deine Staub-Kappe reinragt. Dann landen fast alle spaene innen und die saugkraft ist unter umstaenden staerker.
@brh4015
6 жыл бұрын
Steck einfach die Hand nicht rein?
nice one. the video style has changed or is it just me?
Top
heyho hab die gleiche maschine könnte ich den plan haben
Das war zu 100% ein nötiger Umbau 😂
Wait! What happend to the old jointer?
@criticallook1352
6 жыл бұрын
+Mikkel Bom Simonsen Someone smoked it! :
@DfishDmn
6 жыл бұрын
The home jointer moved to Amsterdam and opened a coffee shop!
@BSMikkel
6 жыл бұрын
DfishDmn hahaha
Pretty sure that's a trapezium and not a parallellogram. Nice build though.
@sikedipuuhja7376
6 жыл бұрын
well, trapezoid has one pair of sides which are parallel to each other. a parallelogram has two pairs, so has this piece as well. so it is regardless how precise the two cuts were with the mitre saw) a trapezoid and a parallelogram
Hi, du machst normalerweise super Arbeit, aber das mit der offen laufenden Messerwelle war schlichtweg Sch.....
Bye bye chips.
Lass dir nen bart wachsen xD