I was just thinking about the magnets, then he mentioned it! Made me chuckle

Absolutely stunning! Well done

Great meticulous work, you are an ARTIST!

Brilliant and Beautiful.

Gosh that was pleasant. Thank you.

Nice work! Beautiful!

Wow! Amazing! Love itt 😍😍😍

Wow, excellent project.

Beautiful!

beautiful!

Excellent !

Excellent design and nice work

well done!!!

Nice tutorial. Now I want to make a jewelry box for my husband. I like the bisagras you made for it

Lovely ❤

really love that...

Beautiful ! Great job !

@FireFeatherDesigns

3 жыл бұрын

Thank you so much 😀

Great job, fantastic result. Regards from Brazil. Dieter

Nice!

really cool

fantastico,veramente bravo.complimenti.

hermoso trabajo!!!!!!!!!!!!!!!!!

6:16 "yes, it's wood.. move along" that's what SHE said! ;)

very good Fantastic 👍

Very nice! Good work. Very functional and creative. 👍🏻

@FireFeatherDesigns

3 жыл бұрын

Thank you very much!

Wow!!!

There is a saying, "simple is beautiful" and this is absolutely beautiful. (project not simple but the result design is :) ) well done :)

@FireFeatherDesigns

3 жыл бұрын

Thank you! 😊

Good video, good work!

Nice project keep it up cheers :D

Omg this gives me soooooo many ideas for my own laser! Thank you for this video! You inspire me!

@alexalexandra3993

3 жыл бұрын

You know how much is a laser like this ? Pls

@Viper2132

3 жыл бұрын

@@alexalexandra3993 professional quality lasers like in the video start around 2.5k and go up from there. You can get a 40w Chinese laser (colloquially known as the K40) for about 400 but they need some modification to work properly. If you're willing to put in the time, research, and extra money to make a K40 work properly, you can have a laser that cuts wood like this for about a thousand dollars

@alexalexandra3993

3 жыл бұрын

@@Viper2132 thank you ❤

@joserodriguez-uj9po

3 жыл бұрын

@@Viper2132 hey dan what modification i can do , i going to buy this one universalengraver.com/products/15000-mw-blue-cnc-laser-engraving-machine-40x40-inches?variant=16303962062920, i am looking for cut 3mm plywood and balsawood, thanks!

Muy bonito.

Love the captions and the project

@FireFeatherDesigns

5 жыл бұрын

Thank you! :)

@ToppyTree

5 жыл бұрын

@@FireFeatherDesigns can I ask what type of hardware you used for the hinges?

@FireFeatherDesigns

5 жыл бұрын

@@ToppyTree Sure, as you can see in the video no additional hardware has been used for the hinges. It's all made from the same wood, a hole in the sides and on both sides or the lid a little wooden circle that fits in the holes.

@ToppyTree

5 жыл бұрын

@@FireFeatherDesigns oh I see, that makes sense. Thank you for your time

very nice

Nice

Which laser did you use? Looks like a big one, right?

Awesome video. Do you sell the files used to cut the box?

Can somebody tell me which laser cutter exactly is that? :) works amazing!

What type of lens are you using here?Thanks!

Which machine do you use??

Great video. Thanks for the time and effort you've put into making this. Side note: Gloves are for those who plan to fail. Be adventerous ; )

@FireFeatherDesigns

3 жыл бұрын

Thank you so much, couldn’t agree more, wise words :)

@absolut3z3ro

3 жыл бұрын

Gloves are definitely for those who aren't willing to put some "skin" in the game. lol

@darrinjones9387

3 жыл бұрын

I hate working with gloves too. Unless I am welding or caring for an open wound I don't usually use them

Can you cut through that with a glowforge? I'm not sure I can cut that thick with a 45w laser..that would be pushing it..probably take me 3 passes and will scorch the wood..I may try it anyway

i just purchased this file... do you happen to offer a file for the insert/stand?

Lokks better with the burned outer edges sanded back to clean wood.

Fantastic work! May I ask how long this project took to complete?

@sevendesign1805

2 жыл бұрын

That project probably took between 3 and 6 hrs depending. You could complete it quicker if you had all the design files already prepared. I'd give 2-4 hrs for laser cutting sanding/prepping/finish work and and 1-3 hrs for design. Once you get the process, to make duplicates of that box, you could probably cut it down to around an hr. I make similar products by request on a 80 Watt laser. I like doing custom stuff because the margins are higher so everything I make is unique and custom. That being said, I'm only guessing at the fastest time you could probably make something like that.

Looks great! How thick was the wood?

@FireFeatherDesigns

5 жыл бұрын

Hi, thank you! We used 6mm thick oak that's about a quarter inch.

At 3:08 where you cut only the tab/bridge which wasn’t originally cut - is that a feature of your software, or do you set that up manually? Mesmerizing build by the way 👍🏻

@FireFeatherDesigns

3 жыл бұрын

Thank you for your message! Yes we set the tabs up manually. For complex shapes we wrote an illustrator script to automate the process.

name o laser type ?

Could you please tell me what kinda machine you’re using? Thanks a million

@FireFeatherDesigns

5 жыл бұрын

Hi, we are using a 100watt CO2 laser-system

@jonniewalks8848

5 жыл бұрын

Thanks for the prompt response. Highly appreciate it.

Love the pen box. Can you share the svg file used to cut the box parts? Great Project

@Bobster986

3 жыл бұрын

Lynn Lacey I guess not. LOL

@ruftime

3 жыл бұрын

Bobster986 Another Porsche guy😎 Makercase.com is the site that allows free design and download of box designs, that I use with Lightburn.

Incredible! Can you share the svg file used to cut the box parts?

@pyppublicidad2782

3 жыл бұрын

x2

@butchfoster5256

3 жыл бұрын

Yes, please

What laser are we using for this beautiful pen box?

@FireFeatherDesigns

3 жыл бұрын

Hi! we used a 100w CO2 laser

@SimplyAlteringMaterials

3 жыл бұрын

@@FireFeatherDesigns Is their a specific brand name for the machine you're using, or is it just some generic Chinese Co2 laser?

Amazing job! May I know the name of the machine that you used for smoothing the edges of the wood?

@Jeremy-su3xy

3 жыл бұрын

Is it his secret?

@darrinjones9387

3 жыл бұрын

I am going to take a guess but it looks like a horizontal belt sander. You can find a hobby size one at Harbor Freight for a reasonable price.

What is the thickness of the wood used for cutting?

@FireFeatherDesigns

2 жыл бұрын

6mm

Outstanding work! Could you tell me what abrasive wax you used?

@FireFeatherDesigns

4 жыл бұрын

Thank you! Sure, I used Yorkshire-grit (black)

How many watts is your laser? I can barely cut through 1/4 inch plywood 🤣

@DavZell

3 жыл бұрын

He answers that below. 100W CO2

I know this is a older video, I am looking for some plans for a pen box like that, can you point me in the right direction or sell me a copy of yours.

@ToddMoore1

3 жыл бұрын

try etsy?

@FireFeatherDesigns

3 жыл бұрын

Hi Jim, we released the vector plans for this penbox and added the link in our video description. They are now available in our projects store.

100 watt laser

Is it available in India? How much it's price in India?

@FireFeatherDesigns

3 жыл бұрын

Hi Nasib! If you would like to create this penbox, we released the project files and added the link to this project in the video description.

Why is this your only video?

@FireFeatherDesigns

5 жыл бұрын

I know! rediculous right? Been really busy but have a few new videos in the making with some great projects.

@2Tallteacher

5 жыл бұрын

Fire Feather Designs ok. Subscribing for the future!

kind of wood please

@FireFeatherDesigns

3 жыл бұрын

We used solid Oak

Можете отправить файл мне?

Disgusting. Most of us laser etching types like the burn edges and you spent so much time removing them… 😢

Wow!