Americans are very generous when it comes to sharing skills and knowledge.

@christopherpaulin5548

Жыл бұрын

We learned from Europeans: many others are generous as well

I am the instructor. Many thanks to Joe Jenkins for both hosting an excellent conference, and filming, editing and posting the video. Unfortunately Kaszia, while the RBM works very nicely, it will not do compound radii, or a radius as tight as we usually see at the midpoint of the "swoop".

From this second generation roofer you are craftsmans at the highest level. This old dog just learned some new tricks 😆 Thank you gentlemen

@christopherpaulin5548

Жыл бұрын

Thanks for the kind words Peter

Beautiful! Much better workmanship than other videos I've seen on KZread. Copper work like this is a dying art.

@lukehughes9026

Жыл бұрын

Very good

@christopherpaulin4886

Жыл бұрын

Thanks for the nice comment

Thanks for your long-time support of Klenk tools! This video is awesome :)

@christopherpaulin5548

Жыл бұрын

Thanks for making great tools

from a fellow sheetmetal roofer, job done well. true craftsman of our trade.

👍 I’m a smith myself, fabricated and installed on many historical buildings, churches, clock towers, high end home goodies. Everything from flashing, chimney crickets, gutters, scuppers, downspouts, cupolas, gazebos etc.

@suhwateezea.214

Жыл бұрын

Need a sales guy?

Excellent work, gentlemen….. I use to do a lot of copper work and learned quite a bit from this video, thanks!

I have watched a couple different craftsman do this roofing and the difference in craftsmanship is completely different.

Mad skill.True artist

Thanks for the stretcher stand idea

Great setup for the metal shrinker.

nice to watch a real craftsman at work . thanks for sharing !

Way to go, guys. I love your setups and effective methods. Bravo! Make it happen!

Great video, Thank's for taking the time to make it.

Beautiful craftsmanship, greatly enjoyed seeing your work.

Nice job, I am currently installing an lcc standing seam barrel roof. I like the tips I get from this video

This is really nice work. We deal with a lot of bending tools like Wuko....it's nice to see how it is done by hand.

Nice workmenship,keep up the great Work!

Wow! true craftsmanship, laborious, thanks for sharing

That is cool you guys have a traing class to master your craft. Great work

Wow. That's great. Little confused about the copper/flashing at the top.

Great video. I do a simular profile for the top. Haven't done double seam for curved panels. I do a cap seam with top and bottom ends folded and soldered.

Nice work. We just do a single, no one wants to pay more for the double lock.

@christopherpaulin5548

Жыл бұрын

Doesn't take much longer to do the double. Go for it

Very nice.

How many old guys in the crowd passed away during the making of this one bay roof? Great workmanship , great deal of time!

great job guys...thanks for taking the time to share...any tips on a "hip" variation that returns back into the house?...thanks

@christopherpaulin5548

7 жыл бұрын

Great question. The answer is in the British CDA details, found here free of charge: copperalliance.org.uk/resource-library/pub-156---copper-roofing-in-detail Hope that helps-

I only wish my Father were here to see this craft

200 year life. Nice.

@onetwothree4148

Жыл бұрын

Not with the shit in our rain...

That is beautiful work! Would you mind telling where the seaming tools can be bought? I looked at Slate Roof Warehouse but could not find these. Thank you.

@jcjenkins01

2 жыл бұрын

There are numerous places online: www.eastwood.com/metal-fabrication/shrinker-stretcher.html www.amazon.com/VEVOR-Metal-Stretcher-Shrinker-Capacity/dp/B0972SLPNG/ref=sr_1_6 www.stortz.com/product-category/roofing-tools/sheet-metal-roofing-tools/standing-seam/lancaster-shrinker-stretcher/

@christopherpaulin4886

Жыл бұрын

Thanks for your comment. Stortz and ESE Machines carry the seaming tools I'm using in the video

can you show photos of how you built the curved frame?

Ty for taking the time out to record and show,Q1 How do you figure the material length before you shrink it ?

@christopherpaulin5548

7 жыл бұрын

Hi Randy, and thanks. We simply lay a flexible rule or measuring tape down on the deck surface of the curve to be clad. Hope that helps-

nice Video, look at my copper shingles✌👍

Nice

And good setup,my boss is a jerk always rushing me, so I can't find the time to setup properly

Сейчас так не делают( много часов работы( а результат отличный!

@christopherpaulin5548

7 жыл бұрын

Спасибо

красиво ! Руки на месте.

@christopherpaulin5548

7 жыл бұрын

Спасибо

We are doing a similar project. Can you tell me where I can purchase the radius dollys? Or at least the brand so I can search. Thank you for your time

@christopherpaulin4886

3 жыл бұрын

ESE Machines 002C, here's the link: www.esemachines.com/hand-tools

@brianholt7733

3 жыл бұрын

@@christopherpaulin4886 Thanks

good till the next hail storm, lol

What's the name of the tool that forms curvature? Cheers

@jcjenkins01

2 жыл бұрын

Shrinker-stretcher.

how a double roll lock is done.. son

Try RBM :)

How do you finish the bottom of the seam?

@christopherpaulin5548

Жыл бұрын

In general accordance with UK CDA Publication 156, Copper Roofing In Detail, 22-27

I wish I could find someone in my area of NE Oklahoma that could do this. I've searched a 3 state area and ....zip

@christopherpaulin5548

Жыл бұрын

We travel, give us a call to discuss your project

@jcjenkins01

Жыл бұрын

Check slateroofers.org. Look at the member map or the contractor directory.

where can I buy such an apron?

@christopherpaulin4886

3 жыл бұрын

grab a wide belt, pair of 4 pocket side bags, and a hammer loop from home depot or lowes or your favorite store and you're in business

Name of this machine please

@jcjenkins01

2 жыл бұрын

shrinker stretcher

What are you Antiquing while you're installing it? Geesh, that's a lot dings on the side panel. Not good.

@kineticinstallationspecial5775

8 жыл бұрын

you won't see it in 3 days in Ohio and nothing was a tear so quit with your trolling

@christopherpaulin5548

8 жыл бұрын

+fila32 Yep. Using old fashioned seamers on a shifty mockup to show how it's done, because there are some applications where the new fangled folders just don't work. I'm always up to to learn new techniques though! Where's your video showing your better work? I'll check it out.

OK

I know the guy who is wearing white hardhat. John

I wish Mexicans were this detail oriented.

WTF!!!! A DOBBLE PONYTAIL???????? Wow.... i never imagined anything worse than a ponytail.... but its 2 pony tails

@sheep1ewe

8 жыл бұрын

+Conor Egan i will wear 3 only for You sweetie... :D

Why ur delete my coment shame

@jcjenkins01

8 жыл бұрын

nobody deleted anything, other than a spam link a week or two ago.

like the man said, buy american made tools, nice job

You know I thought I'd watch your video again, just maybe I was to hard on my criticism. Well I was right that was a real Amateur example of installing a Sweeping Dormer Roof Panel. All the marks left behind were unacceptable. So I'll stick to my original comments.

@christopherpaulin5548

8 жыл бұрын

+fila32 Where's your video showing your better work? I'm always up to learn new techniques!

@Dollarvr7

7 жыл бұрын

I do mine very similar to this, those marks go away as soon as the patina process starts, but I am very interested in a way to do mine better.

If you don't like criticism do it right . I guess it's "Hack Town Ohio USA"

@christopherpaulin5548

8 жыл бұрын

+fila32 Not sure exactly what point your comment is addressing, but we are far from hacks, and I'm always open to learning new and better techniques, so post a video of your work in process and I'll check it out..

@kingofepicvlogs4666

4 жыл бұрын

fila32 - why are you such an insecure ass? Post a video of your supposedly superior work and we’ll tear that shit apart