Wether it works or not, you should be commend for your perseverance, patience and primitive tools

@TheRhinestoneHurricane

3 ай бұрын

Thanks ☺️

If this person had a China made mini lathe, he could build double barrel shotguns from scratch!

Can you imagine the look on the face of the archeologist that finds this in 1000 years

It's impossible to have a right axis for the bullet going out.

@TheRhinestoneHurricane

Ай бұрын

You got me, I have a 50k lathe hidden at the back of my 8x12 foot shed 😛

Aos críticos aqui presente que se julgam, tão espertos e inteligente, desentorte a alça de um pinico, sem quebrar a louça que o protege

not a lick of oil while drilling, I bet it's not tempered anymore, wow

Maybe the man wants to show that even without lathes and various machines, something can be made with a lot of improvisation.

แล้วมันจะระเบิดตั้งแต่ลูกแรกมั้ย ขอรีวิวการยิงด้วยครับ❤❤

It's miraculous how you managed to make a perfectly centered through hole

@TheRhinestoneHurricane

8 ай бұрын

Thanks, it’s pretty easy once you drill the first hole 🥵

@pietrobernini4471

8 ай бұрын

First hole, thin drill bit, even more miraculous.@@TheRhinestoneHurricane

@remi1239

8 ай бұрын

I'm not sure it is as perfect as you say.

@jozefbubez6116

6 ай бұрын

I think it's always a bit of a gamble but as a principle, it is far more likely to get a straight hole by inserting a drill into a rotating workpiece than the other way around.

@remi1239

6 ай бұрын

well Jozef, that is indeed the right way to do it@@jozefbubez6116

Can't believe I just watched you drill a hole for a half hour... cool project though.

@TheRhinestoneHurricane

Жыл бұрын

Yes but what a cool hole :P

@mattivirta

9 ай бұрын

worst job, not safety and accurate and good.

@miladnaroouy

8 ай бұрын

​@@TheRhinestoneHurricaneشسسظظظظظظظظش

@TheKrausenKid

8 ай бұрын

@@mattivirta you're just mad he has the balls to do this. 😘

@user-mx4pt1dv9r

6 ай бұрын

😂😂😂😂

Excelente !como os velhos tempos do velho oeste ,quando não existia torno ,assim aproveitamos a tecnologia nos dada por ET,s.

@bernardritel2813

4 ай бұрын

👽😉🖖

Sehr lustig, besonders das mit der Eisensäge 😂

@Bluesmann1

5 ай бұрын

Allein schon daran merkt man dass der keine Ahnung von Metallbearbeitung hat. Was dann folgt ist noch schlimmer.

@shintokatana17

5 ай бұрын

@@Bluesmann1 Ja und? Mach das mal mit so einem Setup 😂

9mm is centerfire, .22LR is rimfire. How do you overcome that problem?

@TheRhinestoneHurricane

4 ай бұрын

5.7x28mm is a center fire ;)

капец конечно условия и качество изделия, + можно было бы сделать его с горкой... если не иметь вообще ничего и такое сгодится, но я очень негодую.

Very cool budget lathe

МОЛОДЕЦ. ТВОРЧЕСКИЙ ПОДХОД. СОЗДАВАТЬ ЧТО-ТО, ТВОРИТЬ, НАХОДИТЬ РЕШЕНИЯ, ВОПЛОЩАТЬ В ЖИЗНЬ СВОИ ЗАМЫСЛЫ- ЭТО ПРЕКРАСНО! МНЕ ОЧЕНЬ НРАВИТСЯ ВАШ ПОДХОД:- В ПРОСТЫХ, ДОМАШНИХ УСЛОВИЯХ, С МИНИМАЛЬНЫМ НАБОРОМ ИНСТРУМЕНТОВ, С ПОДРУЧНЫМИ СРЕДСТВАМИ ДЕЛАТЬ НЕВОЗМОЖНОЕ! ВЫ ВДОХНОВЛЯЕТЕ ЛЮДЕЙ НА ТВОРЧЕСКИЕ ПОДВИГИ. СПАСИБО!

@TheRhinestoneHurricane

7 ай бұрын

пожалуйста :)

@ivanspale2163

4 ай бұрын

Da da , savršena cev za ostati bez sake. A vidim da covek ne zna da je ovo metak za olucenu cev.......Kad bude opalio jedan metak iz nje, sledeci klip ce te gledati kako pravi deblju cev ,nogama....

hmm very basic and effective,smart brain

@TheRhinestoneHurricane

2 ай бұрын

Thanks, I’m also working on a pen gun 😈

Like McDonald's, im lovein it.... Nice budget idea,I wouldn't go over a 22 cal but I'm doin it.....

@TheRhinestoneHurricane

7 ай бұрын

Thanks, 5.7 is technically a 22 ;)

Que el señor te conserve manos y cara intactas...

13:28 the dude she told you not to worry about

palisz wiertła wiercąc na sucho, chłodziwo jest potrzebne !

@TheRhinestoneHurricane

7 ай бұрын

I use a drill press know ;)

Very good sir. Getting a centre hole threw that round bar free hand must of been hard did you do it first time. Nic work just using a drill.👍

@TheRhinestoneHurricane

3 ай бұрын

Thanks, I have a drill press now 🤗

I would like to see a test by shooting 2 - 3 rounds. Then I will believe in this method! Хотелось бы увидеть тест по стрельбе 2 - 3 патрона. Тогда я поверю в этот метод!

@vladi2554

7 ай бұрын

Ну плешивому диктатору ты же веришь или нет? Хотя он только переобещать обещаемое обещать гаразд.

@warrior-0f-light

6 ай бұрын

Метод рабочий, но дрочево... и точность, так себе.

me too I just watching

Что то здесь не так, соосность при сверлении в таких условиях ( без токарного) получится только при встречном сверлении ( и пруток и сверло вращается навстречу друг другу

Een hol pijpje 😂😂😂😂die had je ook in de winkel kunnen kopen dan had je sneller geweest😂😂😂😂😂👍🏻👍🏻👍🏻

Well come my friend I liket your have skill 👍

@TheRhinestoneHurricane

2 ай бұрын

Thanks ☺️

Нет точно закрепленного центра. Есть ручной подгон под патрон. здрасьте всем. У нас в России за это содют)

Very good. Maybe Missing subtitles for tools zises on MM used and chamber for bullet should be thicker for pressure.

@TheRhinestoneHurricane

27 күн бұрын

It’s designed to fit inside the barrel, can’t be very thick 😉

Ik zou is een scherpe boor nemen en af en toe een drupje olie zou op zijn plaats zijn denk ik 😂😂😂

Aan de zijkant van een slijpsteen slijpen???????

why didn't you use any cutting oil, and be surein the future ti use sharp bits, the last oe was obviously dull and probably weakened the steel!

@TheRhinestoneHurricane

4 ай бұрын

I used grease on the first bit, the hardest one to drill through ;)

А что, разве на токарном станке не проще ли и точнее было бы это сделать?

@TheRhinestoneHurricane

4 ай бұрын

I don’t have a lathe 😪

@Old-N-Odd

4 ай бұрын

@@TheRhinestoneHurricane Печально. Если вы занимаетесь такими работами, то он вам просто необходим. Впрочем, этот станок и для других работ весьма востребован.

Has considerado hacer de pastor?

Successfully wasted another 10 minutes of my life... but so did he

Sur du petit calibre 🤔 22 lr , maxi,au dessus suis pas sûre que ça tienne la charge 🤔 😮

İstanbul'dan selamlar müthiş bir iş çıkardın

@TheRhinestoneHurricane

7 ай бұрын

Thanks, you should check out my playlist 🙂

Kühlung und angemessene Drehzahl wären besser. Laienarbeit!!

@Bluesmann1

5 ай бұрын

Laienarbeit! Das hast du sehr rücksichtsvoll gesagt! 😂 Passender wäre Pfu***

Le centrage plus tôt folklo

Can please tell me what steel do you use? Thanks

@TheRhinestoneHurricane

3 ай бұрын

I used a roller from a photo copier 😛

a smooth bore? What about the rifling?

@TheRhinestoneHurricane

8 ай бұрын

We don't need no stinkin rifling B)

Very cool!

@TheRhinestoneHurricane

Жыл бұрын

Thanks ☺️

@doejohn8674

Жыл бұрын

@@TheRhinestoneHurricane Can't wait to see some test firing on a range

@TheRhinestoneHurricane

Жыл бұрын

@@doejohn8674 I already tested it 😯

@doejohn8674

Жыл бұрын

@@TheRhinestoneHurricane I saw the other video with the blank cartridge, but did you try it with live ammo?

@TheRhinestoneHurricane

Жыл бұрын

@@doejohn8674 I don’t have any live ammo, probably too spicy for the derringer 😬

Mucho ingenio y perseverancia genial .

@TheRhinestoneHurricane

8 ай бұрын

Muchas gracias! ☺️

این مال قبل از اختراع دستگاه تراشه 😢 ! آقا مته سوخت ! آب بریز !

No offence, but I can't believe that you drilled a perfectly centred through hole using this method. I suspect there's something you're not telling us.

@TheRhinestoneHurricane

8 ай бұрын

I do it all the time, no big deal :)

@ratheanach5545

8 ай бұрын

@@TheRhinestoneHurricane Sorry brother, but the visible run out on that bar stock in the opening seconds-that alone-would make it all but impossible to keep a drill bit perfectly centred.And I doubt that anyone could manually hold a drill chuck sufficiently steady as to maintain accuracy to that degree. If it was that easy, wtf would we need engineering lathes?

@TheRhinestoneHurricane

8 ай бұрын

@@ratheanach5545 You can be believe what you want, I just grind out the goods 😎

@vladi2554

7 ай бұрын

😂🤣

@user-oy8mo5qf1h

Ай бұрын

The chuck that you push forward with the bits in it, is that set up on a little block or something? Whatever your doing is working man.

MT fino esse cano 🔥 🫣 ...💣...💣.....

I think lathes are too expensive too

Demasiado tiempo perdido en ese proceso

sera preso

Кто так сверлит?(12 стульев.)😂Ильф и Петров предвидели такое.

@user-gr9cj8bw8t

6 ай бұрын

Ерунда, но ты победил в том , что сумел полчаса нам пропудрить мозг,браво.

The 5.7 mm round isn't parabellum but the chamber has parallel sides so won't the casing split in a rather dangerous manner when you use this chamber adapter?

@TheRhinestoneHurricane

8 ай бұрын

I don't think so, the 5.7 case should be fully supported :)

@Gary-Seven-and-Isis-in-1968

8 ай бұрын

@@TheRhinestoneHurricane The AK chamber tapers 1mm in diameter along the length of the casing until the neck is reached. Obviously a taper aids extraction of the casing. I get the point about firing a 5.7mm round down a 9mm barrel, it isn't going to be a good experience.😂 You'll have to show the results.

Interesting... any tests planned?

@TheRhinestoneHurricane

Жыл бұрын

I tested it with a blank that I made :)

@Smallathe

Жыл бұрын

@@TheRhinestoneHurricane Great. Just be careful testing live... fingers are priceless but strings (to pull the trigger) are cheap... :)

I think that a burral for good gun .😊

@TheRhinestoneHurricane

6 ай бұрын

It’s not a barrel, it’s designed to go into a barrel 😉

Have you ever heard of oil?😂😂

@TheRhinestoneHurricane

5 ай бұрын

Sometimes ;)

@Bluesmann1

5 ай бұрын

Even oil would no longer help with the technology. He lacks more important fundamentals.

Способ изготовить смертельное,для хозяина, оружие.

@bernardritel2813

4 ай бұрын

C'est pas faux,😉 22 lr,maxi ,au dessus 🤔 boum 😮

Mate you need a metal lathe.Asap.

@allanclose4181

3 ай бұрын

He needs a drill press.

Nain teh.kultura.

et pourquoi ducros il se décarcasse ? bonjour la précision.. (a chier sans doute🤔) ....

Устранить фатальное биение не пытался? Это издевательство над материалом и инструментом. Ад перфекциониста!

@TheRhinestoneHurricane

7 ай бұрын

Thanks

@Tik.Tak.

5 ай бұрын

@@TheRhinestoneHurricane Спасибо за видос! А я таких придурков которые в такой агрессивной форме пишут комментарии сразу блокирую, удивляюсь твоему терпению)

@EugenSobolev

4 ай бұрын

​@@Tik.Tak.Просто твою херню никто не смотрит, там и блокировать некого😂😂😂😂

у него руки золотые, их целовать надо

@chipngo9758

4 ай бұрын

😂nice sarcasm.

Ja en wat is het nu geworden 😂😂😂😂

what about some oil friend?? it will protect your drills!!

@TheRhinestoneHurricane

7 ай бұрын

I don't use this method to make chamber inserts any more, I have a drill press now :D

@mitropoulosilias

7 ай бұрын

goos good. you bought or diy?@@TheRhinestoneHurricane

@TheRhinestoneHurricane

7 ай бұрын

@@mitropoulosilias bought it 😊

yea that will last about a milisecond when it blows up in his face not a wise thing to do

You fire that and that shoulder and neck on that case will disappear. Not Good!

❤❤❤

Sem interesse algum !...

@TheRhinestoneHurricane

5 ай бұрын

Works for me 😊

Какой-то ребенок играется с папиным игрушками ,иди мультик смотри

Non va bene troppo tempo e troppo lavoro. non si fanno col trapano quei lavori. 😢

@TheRhinestoneHurricane

3 ай бұрын

It's ok, I have a drill press now 😀

🦵 ..... CANECA SECA ...😅....✌️...🇵🇹..

🦵 ...... canela seca.....✌️.....🇵🇹...

Cutting oil

@TheRhinestoneHurricane

6 ай бұрын

I do use a bit of grease on the bits 😉

แผ่นตัดไทเทเนียม

Пакистан!

@TheRhinestoneHurricane

6 ай бұрын

America 😎

Незнам какво е това може да бъде всичко друго но не и цев

@TheRhinestoneHurricane

6 ай бұрын

It’s a chamber insert, it goes inside the barrel 😉

Ow

Что за порнография???😮

Some people shouldn’t be alowed to touch tools 😢… That drilling is the worst ever 😭…

@Bluesmann1

5 ай бұрын

Yes you are right! don't understand the positive comments. Apparently most people don't understand what they're seeing.

Why not just buy a cheap 9mm barrel ?

@TheRhinestoneHurricane

19 күн бұрын

It would have to be a blank, can’t any holes drilled in it 😉

@AK-47.762

19 күн бұрын

@TheRhinestoneHurricane I do know they have barrels with no holes. I got 1 cheap for a 380 I brought back to life. But you're like me. I like to try and make my own stuff.

The .57 is unstable in a good barrel Its a crappy round

@TheKrausenKid

8 ай бұрын

Good thing its a 5.7 instead of a dutch flintlock caliber then!

Isn't the chamber insert heat treated after finish?

@TheRhinestoneHurricane

4 ай бұрын

Nope, relies on chamber integrity ;)

Video could’ve/should’ve been edited down to about 3 minutes!!!

@TheRhinestoneHurricane

Ай бұрын

The whole reason this video took off is because it’s over half an hour 😂

Несоосность очень большая.

ДБЛ БЛД!

2 word, "CUTTING OIL"

🤣🤣🤣

worst drilling what i ewer has seen, better not do anything before you have good tools first. build good lathe or buy,

@sandroventania782

8 ай бұрын

Não amigo. Pior é não fazer, dar desculpas que não tem ferramentas adequadas. A maior e melhor ferramenta ele já tem, que é a criatividade. Parabéns a ele.

@emiliogonzalezlopez8888

8 ай бұрын

M

Total B S

@TheRhinestoneHurricane

4 ай бұрын

How so 🤔

Frend,beter stop this aderways you will hurt your self of same one alse

😂😂😂😂😂😂wat een waardeloos filmpje

What happen if the barrel be rifled all the way even at the chamber ? No trouble ? And what else ? Is can see - the factory made guns always have no rifling at the spot where the cartridge will b and folowing the lenght of this

@TheRhinestoneHurricane

8 ай бұрын

You're talking about the leads, this section which gradually phases from nominal bore diameter to the inside lands. This is accomplished by milling down the surface between the introduction of the rifling and chamber mouth,

@Vo_d_kontra_o_norMAL

8 ай бұрын

@@TheRhinestoneHurricane answer - what Happen if the barrel are fully rifled + which is also what happens to the homemade rifled barrels- they Often get fully rifled - no chamber without rifle

@TheRhinestoneHurricane

8 ай бұрын

@@Vo_d_kontra_o_norMAL that would not work, the shell casing would get stuck 😦

@Vo_d_kontra_o_norMAL

8 ай бұрын

@@TheRhinestoneHurricane the cartridge would get externaly rifled by expansion ? And the cartridge would get out by rotating it out like a screw !?!

@TheRhinestoneHurricane

8 ай бұрын

@@Vo_d_kontra_o_norMAL that would be quite the extractor 😯

И ! Что дальше ? Здать в плицию за нелегальную перделку ? Бред ! Сколько вас еще таких дурачков ?

@TheRhinestoneHurricane

6 ай бұрын

I don’t know what’s fake about it, I tested it 🙂

@user-sw6tg1mm4k

6 ай бұрын

а че ты так сагрился на него? пусть делает что хочет, он еще и доброе дело делает - помогает новичкам освоить кустарное оружейное дело

@yoschkinkot208

5 ай бұрын

"Здать" - ЕГЭшник)))))) И Сдают только у нас. У автора (США) это вполне легально., там не ссут власти давать право на оружие людям. А у нас скоро рогатки, блять, запретят.