Learn AutoCAD in a step-by-step way with more than 26 video lessons with quizzes and practice exercises for free here sourcecad.com/courses/autocad-essentials-course/

@rockeygarcia5865

2 жыл бұрын

Hey sourceCad, your thumbnail shows a rendered model. Can you please make another part of video to show how you rendered it?

You've just earned a new subscriber

Hello Jay, just another wonderfully crafted tutorial; clear explanations too. Your drawing tutorial introduces so many CAD elements that a beginner like me would not even think of. Please make lots more real world 3D and 2D drawing projects.

@sourcecad

7 жыл бұрын

Thanks John :)

Hai, this thing like a time machine, this video have been uploaded 6 years ago, but it helping me now,

Hi! Very good, professional material! I learn a lot from your videos. Could you please make a tutorial or explain how did you make the final image of the speakers, meaning how do you render your objects to appear photorealistic? Thank you in advance!

@sourcecad

9 жыл бұрын

hunsnowboarder02 I render these models using KEYSHOT and since my channel is focussed on AutoCAD videos hence I don't explain rendering but I will in future include rendering as well.

hello sir actually i want to thank u for this lesson in the same time i wanna ask u if i can use autocad classic in cad 2015 in fact i dont tried it yet

@sourcecad

9 жыл бұрын

Said Benzou although it is not present in autocad 2015 but you can stll use it follow this link to import autocad classic in autocad 2015 knowledge.autodesk.com/support/autocad/troubleshooting/caas/sfdcarticles/sfdcarticles/The-AutoCAD-classic-workspace-is-not-available-in-AutoCAD-2015.html

Thanks for the lesson. What brand computer are you using? Btw. I am looking into buying a lenovo.

@sourcecad

9 жыл бұрын

Andrew Schechter Welcome Andrew, I use Acer laptop for my design and drafting software's I would suggest you to select computer with good configuration like minimum 4 gb ram, certified graphics card, at least 2.1 ghz processor any thing better than this is definitely going to increase performance but these are minimum requirements in order to have smooth experience with your software's.

@andrewschechter8152

9 жыл бұрын

Ok, thanks again!

@sourcecad

9 жыл бұрын

Andrew Schechter Thanks Andrew for sharing my videos Its good to have great subscribers like you!

@andrewschechter8152

9 жыл бұрын

+SourceCAD Of course! You offer a great free service and I want to help you become popular like other Modeling/autocad channels (some have more than 100k). I also noticed how well you comment back and how you treat your subscribers (like how you mention my name in the comment and general quality) it is very professional! So, your're welcome, and thank you for being a part of the engineering KZread community. I believe that you will go far.

@andrewschechter8152

9 жыл бұрын

I meant to say 10k subscribers.

thank u sir

@sourcecad

9 жыл бұрын

Said Benzou welcome :)

I can copy from you? :))

When I import a 3d model to 3D max from Auto cad it is always change the circular shapes into shapes like decagon. How can I solve this issue ?

@sourcecad

8 жыл бұрын

It generally happens when you import file in native CAD format, I am not sure of the exact reason why this happens but you can try a workaround to get high quality output. Export this cad file to .STP or .IGES format and then import that file in 3D max (I guess 3D max supports STP and IGS formats). I have tried with STP and it works great for me when I import it in keyshot.

@Asa-ld1xt

8 жыл бұрын

+SourceCAD : Thank you very much for your attention.

@sourcecad

8 жыл бұрын

Welcome

hello sir... can you please teach how to use materials on the speaker???

@sourcecad

8 жыл бұрын

Sure Sikandar, I have noted your request and I will make a video tutorial next week with related to rendering mechanical models. Keep looking this space and don't forget to subscribe if you haven't to get update when video goes live.

@sikandariqbal4430

8 жыл бұрын

+SourceCAD thanks

@sikandariqbal4430

8 жыл бұрын

+Sikandar Iqbal please make a full rendering video...

@sourcecad

8 жыл бұрын

For a full rendering course you can enroll in this course available on SourceCAD website sourcecad.teachable.com/courses/create-photorealistic-house-from-scratch-to-end-in-autocad

Hi...It was very interesting project,but if you have time to make some tutorial about drawing in 3D(chaning place of X,Y,Z). When I change there is a complete mess Thank you ;) ;)

@sourcecad

9 жыл бұрын

Amar Memisevic Thanks Amar, as you can see that in most of my drawings I change my co-ordinate system and you can refer to more 3D drawings on SourceCAD but if you want detailed tutorial on eD co-ordinate system then I suggest you to go through this tutorial it will help kzread.info/dash/bejne/aJeXlKqxZM_Qh5s.html

@amarmemisevic3151

9 жыл бұрын

SourceCAD I am sorry I didnt saw that video..I am watching one by one..Great channel and all best ;)

@sourcecad

9 жыл бұрын

Great! Good luck with your learning if you face any problems let me know.

@amarmemisevic3151

9 жыл бұрын

prntscr.com/6bvkse parking prntscr.com/6bvme8 trying to make a 3D sign prntscr.com/6bvoaz what is your advice :D :D

@sourcecad

9 жыл бұрын

Amar Memisevic I am unable to understand your exact requirements with these images, But as far as I understand you should change your co-ordinate orientation before making that circle.

Sir why if I do Extrude command ° ° he always leads to the top Let me give an object number 5 is always pointing up, but if I give a new -5 numbers will lead to bring

@sourcecad

9 жыл бұрын

galih permana I am sorry Galih can you make this more clear as I am unable to figure out your exact question.

@galihhackers

9 жыл бұрын

SourceCAD If I do Extrude command he pointed up, but if I do extrude with a minus figure he was going to lead down

@sourcecad

9 жыл бұрын

galih permana Yes using positive sign or no sign will extrude in positive z axis in this case upwards but negative direction will extrude it downwards. If I could understand you might be facing problem with extrude use presspull and select area inside geometry instead of extrude let me know if it helped

@galihhackers

9 жыл бұрын

for this picture a little bit difficult, I've practiced, but why a small circle does not want to circle round and great why he does not want a slightly curved downward. when I've used a radius corresponding in the video, and to which side I already use the command 'chain' with a radius of 0500 but only slightly affected by the fillet does not match that in the video you can see my pictures facebook.com/photo.php?fbid=800240026678606&set=a.315866525115961.66587.100000778479131&type=1

@sourcecad

9 жыл бұрын

galih permana I would suggest you to use higher value of radius if 0.5 is not working for you, As I already mentioned you need not be precise just select values that suits you best

i can not understand why are you changing ucs and who you are changing ucs.