Make your own Small Tap Handle !!

Ғылым және технология

Many have commented on the small tap handle I'm using in the steam engine series. This video will show you how to make your own. Its easy to make and a good project you'll have for years.
Patreon Support: / joepie
Website: www.advancedinnovationsllc.com
Web Store: www.advancedinnovationsllc.co...

Пікірлер: 373

  • @DavidSmith-be2pn
    @DavidSmith-be2pn3 жыл бұрын

    I think I'll sneak this in on my wife's "Things to do List" that she has for me :)

  • @v8Mercury

    @v8Mercury

    3 жыл бұрын

    LoL. I'm not the only one?!

  • @copasetic216

    @copasetic216

    3 жыл бұрын

    🤣

  • @JohnSchirra
    @JohnSchirra3 жыл бұрын

    I like your v-notch parallels! Gotta make a pair of those.

  • @joepie221

    @joepie221

    3 жыл бұрын

    Very versatile.

  • @EmptyPocketProductions

    @EmptyPocketProductions

    3 жыл бұрын

    Agreed... no video of those??

  • @alangriff1

    @alangriff1

    3 жыл бұрын

    I so need one of these...magical Thanks Joe

  • @paulmoir4452
    @paulmoir4452Ай бұрын

    Little set-screw tip: apply a drop of silver solder to the tip of the set screw. It's very grippy but soft and doesn't mar the tool. And if it deforms, it doesn't wipe out the threads when you take it out. Takes only a minute. NTE did it with set screws on their pillowblock bearings briefly way back, which is where I got the idea.

  • @joepie221

    @joepie221

    Ай бұрын

    This handle utilizes a Cap screw because the drive hex is twice the size for better grip. As for the tip, just sand it to a nice 45 degree angle and the threads won't get damaged either. The silver solder is a good idea, so is a brass insert.

  • @paulmoir4452

    @paulmoir4452

    Ай бұрын

    @@joepie221 Thank you. Yes, I've done the brass insert as well with great success. Simply drilling a hole, putting in a bit of round, and letting the first tightening swage it in there. I switched to this because it was faster for me. And you get to play with fire.

  • @Moonfleet41
    @Moonfleet413 жыл бұрын

    Saved in the "Future Projects" box.. Thank you Maestro. !

  • @joepie221

    @joepie221

    3 жыл бұрын

    Better feel, better results. Enjoy it Del.

  • @philipbacon6026
    @philipbacon60263 ай бұрын

    Just made one in metric and it works very well. Thank you.

  • @joepie221

    @joepie221

    3 ай бұрын

    Excellent. You'll get a lot of use out of it.

  • @jawadibrahim2367
    @jawadibrahim23673 жыл бұрын

    Making the hole round so the tap slips if it binds has got to be one of the most clever things I saw in a while.

  • @johnferguson2728
    @johnferguson27283 жыл бұрын

    Thanks Joe, love this type of content. You use a lot of custom tooling in your videos and would appreciate any of this type of instruction showing the details of construction. The parallels you use in this video for instance. They seem simple enough but for a novice like me I benefit from observing your setups.

  • @11LowDown11
    @11LowDown113 жыл бұрын

    Those V-notch parallels are pretty slick!

  • @joepie221

    @joepie221

    3 жыл бұрын

    They do come in handy.

  • @MartinHubbard1
    @MartinHubbard12 жыл бұрын

    Fantastic....now all I need is a lathe and vertical mill, I have a few small taps and this small handle looks like it could be the beginning of something beautiful.

  • @bulletproofpepper2
    @bulletproofpepper23 жыл бұрын

    Thanks joe!!! My 80 year old dad asked me to make him one of those. Thanks for sharing!!

  • @rexmyers991
    @rexmyers9913 жыл бұрын

    My list of ‘Must Do’ projects keeps letting longer. Thanks, Joe for making it look easy.

  • @joepie221

    @joepie221

    3 жыл бұрын

    Let me know when you need more.

  • @cdrive5757
    @cdrive57572 жыл бұрын

    Joe, this is one of those fun shop projects that Metal Shop instructors love to include in their curriculum. It's also one of those tools that often finds its way into your hand. I have a hand full of tap wrenches but I know when it's a small hole to tap this little guy will be the tap wrench I grab! *Its delicate tactility jumps right off the screen!* Thanks! Wakodahatchee Chris

  • @moleklm
    @moleklm3 жыл бұрын

    I'm so glad that you are making these videos. This pandimic has put our backs against the wall. You have a great and clear explanation. I like the techniques that you use.

  • @westweld
    @westweld3 жыл бұрын

    Awesome the v block parralels are a great idea........honestly this is my favorite type of content on your channel the everyday application stuff. Thanks for the heat treat advice.........see you on the next one

  • @CO2isplantfood
    @CO2isplantfood3 жыл бұрын

    Perfect little project for a cold snowy day here in Edmonton AB. I think I will make 2 or 3 different sizes👍

  • @TalRohan
    @TalRohan10 ай бұрын

    this just wandered to the top of my to do on the lathe list Thanks Joe very cool little gismo and an easy fab

  • @joesikkspac7904
    @joesikkspac79043 жыл бұрын

    I always drill the bigger hole first when going 5XD or deeper. That way the smaller drill doesn't have the long travel in and out, in which there's the opportunity to pack with chips and break.

  • @joepie221

    @joepie221

    3 жыл бұрын

    Good approach for sure.

  • @TheMarkDJ

    @TheMarkDJ

    3 жыл бұрын

    That's also a good approach for doing larger counterbores as it prevents the drill from snatching, especially good when drilling and counterboring brass.

  • @johntenhave1
    @johntenhave13 жыл бұрын

    Everytime I watch, I learn something new!. Another great lesson and the craftiest of devices for keeping those alloy jaws in place. Thanks again Joe.

  • @DiaryOfACuemaker
    @DiaryOfACuemaker3 жыл бұрын

    Yet again a simple project that is incredibly useful. Perfect project for beginners and experienced machinists alike!

  • @patrickdowning7674
    @patrickdowning76743 жыл бұрын

    Joe, your content is great. Thank you so much,

  • @billbarnes1043
    @billbarnes10433 жыл бұрын

    I have hundreds of 1/4-20 blind holes to tap at work, made one yesterday with only a Atlas 618 lathe and a drill press with a cross feed vice. Thanks for the inspiration.

  • @paulossiter
    @paulossiter2 жыл бұрын

    I love how you mention the equivalent sizes in mm

  • @FunctionalPrintFriday
    @FunctionalPrintFriday2 ай бұрын

    I feel like you're speaking directly to me. I just did this wrong in a video two weeks ago :P

  • @davidmiskinis3032
    @davidmiskinis30323 жыл бұрын

    FYI, tap sizes up to and including #6 MS (Machine Screw) or M3.5 (metric) made to USA (ANSI) dimensions, have the same size shank and square, which is .141 diameter. The only thing that varies is the length. So your tap wrench will fit #6 as well. If you have small taps that have different dimensions for shank and length, these are likely German DIN dimensions and are in mm. Great little handle. Dave

  • @joepie221

    @joepie221

    3 жыл бұрын

    Interesting. Thanks.

  • @pexe9873
    @pexe98733 жыл бұрын

    appreciate the unique innovation/style/solution can openers from the store don't seem to last long

  • @evilbrat5376
    @evilbrat53763 жыл бұрын

    For a fast project it is very well thought out. Something so simple but most useful in the end. Out-friggen-standing! Thank you, getting one to go in toolbox.

  • @joepie221

    @joepie221

    3 жыл бұрын

    Glad you enjoyed it! You'll use it a lot.

  • @gordondowdy833
    @gordondowdy8333 жыл бұрын

    That there is as handy as a watch pocket! Look forward to including this to my tool box. Thanks you sir!

  • @johntereska4211
    @johntereska42113 жыл бұрын

    Excellent little tool and is on my want to make list, thanks Joe.

  • @TheRatshooter
    @TheRatshooter3 жыл бұрын

    Just finished mine, didn’t take long at all, shoulda done it years ago, thanks, Joe!🤩

  • @angelramos-2005
    @angelramos-20053 жыл бұрын

    Beautiful craftmanship.Thank you.

  • @joepie221

    @joepie221

    3 жыл бұрын

    Thank you very much!

  • @woodenhead8887
    @woodenhead88873 жыл бұрын

    I like it! Not sure what I’ll make first, the tap handles (I’ll be making several) or those handy soft jaws you had. Thanks Joe!

  • @joepie221

    @joepie221

    3 жыл бұрын

    Those soft jaws come in handy.

  • @gagasmancave8859
    @gagasmancave88593 жыл бұрын

    Another nice little project added to my list

  • @johnvaluk1401
    @johnvaluk14013 жыл бұрын

    Nice! Thanks Joe for another project

  • @bhoiiii
    @bhoiiii3 жыл бұрын

    Love this. Built one of Mr Pete’s Starret tap wrenches a few years back. Thanks for another great design.

  • @dannywilsher4165
    @dannywilsher41653 жыл бұрын

    Thanks Joe. I have something similar that I have had for over 30 years. It is the T handle from a high pressure 1/4 inch stainless valve. It was already drilled and tapped like you did yours and I have used it thousands of times.

  • @anarcowhatever
    @anarcowhatever3 жыл бұрын

    Congratulations on reaching the 100k+ subs!

  • @elektroluki1595

    @elektroluki1595

    3 жыл бұрын

    Very well deserved!

  • @nutgone100
    @nutgone1003 жыл бұрын

    Thanks Joe, another great video. I restore vintage magnetos here in the UK, so I only ever use small taps. I’ve got some small tap wrenches I’ve picked up from various places, but none are quite this small. I might well make one of these, simple yet very effective. Thanks for your time making these videos, I’m loving the steam engine build.

  • @timothyprochilo4840
    @timothyprochilo48403 жыл бұрын

    Love the quickie Joe. Thanks!😎

  • @apollorobb
    @apollorobb3 жыл бұрын

    Built mine Saturday .I have to say this handle is super sensitive i like it you can actually feel the spring in the tap . Def. helps to save small taps Thanks Joe.

  • @joepie221

    @joepie221

    3 жыл бұрын

    It sure will. Its a worthy project.

  • @stejac51
    @stejac513 жыл бұрын

    Yep ... just made myself one .... and your right .... its a brilliant little tool ... Thank you ... Cheers.

  • @joepie221

    @joepie221

    3 жыл бұрын

    Provides amazing feedback.

  • @mikenixon9164
    @mikenixon91643 жыл бұрын

    Very nice handle. Good video. Stay healthy!

  • @grahameblankley3813
    @grahameblankley38133 жыл бұрын

    I love good home made tools like this, making one this week end, from Coventry in UK,🇬🇧👍.

  • @howder1951
    @howder19513 жыл бұрын

    Lots of time here now, I watched this twice as I need to have one of these in my small tap container. I may try aluminum as I am going to try the Taig on this project first. Thanks for the tutoring Joe, much appreciated!

  • @grahammorgan9635
    @grahammorgan963510 ай бұрын

    Thanks for sharing Joe a handy little tool to have and use,

  • @sharkrivermachine
    @sharkrivermachine3 жыл бұрын

    I like that design. I have a similar size Starrett that I like a lot. I will make multiples of this handle so that I can leave the popular sizes set up all the time.

  • @iantattersall7328
    @iantattersall73283 жыл бұрын

    Brill been looking for one of these for ages going to make one this afternoon cheers Joe.

  • @markhansford178
    @markhansford1783 жыл бұрын

    Brilliant! Just made one. Thanks Joe for sharing all this on here, it really is so helpful, great ideas and an excellent teacher.

  • @joepie221

    @joepie221

    3 жыл бұрын

    Thank you. Home made tools are fun.

  • @kristalenaG
    @kristalenaG3 жыл бұрын

    Beautiful work for such a utilitarian object. Love your attention to detail.

  • @joepie221

    @joepie221

    3 жыл бұрын

    Thank you very much!

  • @toddbrock239
    @toddbrock2392 жыл бұрын

    Thank you, your videos are really good. And encouraging.

  • @carlwillits9077
    @carlwillits90773 жыл бұрын

    Thanks, Joe! I appreciate all of your videos. Always at least a nugget to take away!

  • @joepie221

    @joepie221

    3 жыл бұрын

    Show and tell can be valuable, but I like to include something you can take with you.

  • @garthbutton699
    @garthbutton6993 жыл бұрын

    Good shop project,I like it.Thanks for the video😎

  • @ChrisB257
    @ChrisB2573 жыл бұрын

    Love that one of yours Joe. I do have one of similar size which I've had for decades - back in the UK a company "Eclipse" made a very handy small handle - it's served me well. Yours is much prettier :)

  • @anthonyfox8641
    @anthonyfox86413 жыл бұрын

    Quite a handy tool, thanks ( again) Joe !

  • @jameslezak8179
    @jameslezak81793 жыл бұрын

    Nice looking piece, Joe! Usefulness is the only thing that outpaces the simplicity and looks! I think I'll knock out several of these the next time I fire up my lathe! Thanks for another great video! 👍

  • @jeffpitzer8521
    @jeffpitzer85213 жыл бұрын

    Thanks Joe.. another tool to add to my to-do list.. keep up the good work!..

  • @pickwizard-aka-Stevie
    @pickwizard-aka-Stevie3 жыл бұрын

    perfect beginners project, will be making one soon, thanks Joe.

  • @Engineerd3d
    @Engineerd3d3 жыл бұрын

    Beautiful first project on a lather. Very handy too.

  • @larrymac8538
    @larrymac85383 жыл бұрын

    Nice work Joe - added to the MUST_MAKE_ME _1 list

  • @tgfcujhb7583
    @tgfcujhb75832 жыл бұрын

    I needed this video last week 👍👍

  • @jadymulqueeney
    @jadymulqueeney3 жыл бұрын

    Thanks Joe brilliant work

  • @owenclark7210
    @owenclark72103 жыл бұрын

    I just found my next project. Thank you Joe. Already made the tap follower and the tailstock die holder.

  • @joepie221

    @joepie221

    3 жыл бұрын

    You'll like this one as much.

  • @owenclark7210

    @owenclark7210

    3 жыл бұрын

    @@joepie221 I'm pretty sure I will - I tend to do a lot of work with 2-3mm screws

  • @sovascarecrow
    @sovascarecrow3 жыл бұрын

    Lol funny you made this video. I went and made one as soon as it saw it in the earlier installment. Already used it several times. Totaly worth the time to make!!

  • @edwardswinesburg877
    @edwardswinesburg8773 жыл бұрын

    A really nice tap holder!

  • @abowie1965
    @abowie19653 жыл бұрын

    Thanks Joe! Off to make one right now.

  • @pecospest
    @pecospest3 жыл бұрын

    There are two kinds of people , my friend.... the ones who break taps and the ones who listen to Joe.

  • @FelipePradoDiaz
    @FelipePradoDiaz3 жыл бұрын

    Great piece. Thanks for your dedicated work and nice explicit video. Great.

  • @joepie221

    @joepie221

    3 жыл бұрын

    Glad you liked it!

  • @christurley391
    @christurley3913 жыл бұрын

    Thanks for the video Joe.

  • @barrygerbracht5077
    @barrygerbracht50773 жыл бұрын

    Gonna make one this weekend. Thanks Joe.

  • @joepie221

    @joepie221

    3 жыл бұрын

    Have fun!

  • @ettoredicarlo1679
    @ettoredicarlo16793 жыл бұрын

    I am definitly make one, thanks Joe

  • @mrayco
    @mrayco3 жыл бұрын

    Life become easier when we watch your video joe thank you alot.

  • @joepie221

    @joepie221

    3 жыл бұрын

    Happy to help

  • @scottb8175
    @scottb81753 жыл бұрын

    Thanks as always. Great idea.

  • @davidschwartz5127
    @davidschwartz51273 жыл бұрын

    I'll make one today. Thanks, I enjoyed

  • @outsidescrewball
    @outsidescrewball Жыл бұрын

    On the list…thanks for sharing…Happy Holidays to the Pie family

  • @joepie221

    @joepie221

    Жыл бұрын

    Seasons Greetings Chuck. Happy holidays to you and your loved ones as well. Thank you sir.

  • @joell439
    @joell4393 жыл бұрын

    Joe, Thank You for another fantastic tutorial...... 👍👍😎👍👍

  • @Vagabond593
    @Vagabond5933 жыл бұрын

    Very nice simple handle that’s very clean. Absolutely love it. Just wish I could afford a lathe.

  • @MilanDupal
    @MilanDupal3 жыл бұрын

    Well done. I’ll follow your design for my workshop new tools.

  • @markshort9098
    @markshort9098 Жыл бұрын

    That's a nice little tool, I'm about to finally put a dro on my Bridgeport clone and I'll have to make one of these first just for some added safety to make sure I don't break a tap off in the machine

  • @johngunn7087
    @johngunn70873 жыл бұрын

    Excellent content- as usual !! Thanks, Joe.

  • @joepie221

    @joepie221

    3 жыл бұрын

    Glad you enjoyed it

  • @peterlastrucci324
    @peterlastrucci3243 жыл бұрын

    Made one.. took me 2-1/2 hours after I thought it would be a 20 minute job! Really happy though and thank you Joe for the tips.

  • @joepie221

    @joepie221

    3 жыл бұрын

    Time well spent.

  • @GreenBambooify
    @GreenBambooify3 жыл бұрын

    I been waiting for this vid.

  • @rd4902
    @rd49023 жыл бұрын

    Thanks for that Joe, I've been looking at your handle for some time, thinking about making one to go with small modelling taps.

  • @peterparsons3297
    @peterparsons32973 жыл бұрын

    just have, been using a very small adjustable wrench, 15 mins to make, years to have the idea thanks Joe

  • @rtkville
    @rtkville3 жыл бұрын

    Nice I'm going to make one for myself. Thank you!

  • @chrismills5110
    @chrismills51103 жыл бұрын

    Very useful, a nice tool, many thanks

  • @Mongoman-oq9bq
    @Mongoman-oq9bq3 жыл бұрын

    Lovely job Joe

  • @joepie221

    @joepie221

    3 жыл бұрын

    Nice tool to add to the box.

  • @philipdenner8504
    @philipdenner85043 жыл бұрын

    i went straight out and made one, it turned out tops. thanks for that.

  • @joepie221

    @joepie221

    3 жыл бұрын

    You'll use it a lot. It gives you great control with small taps.

  • @lisag2771
    @lisag27713 жыл бұрын

    Awesome work!

  • @ophirb25
    @ophirb253 жыл бұрын

    Very very nice. Thanks.

  • @KimbrellBrad
    @KimbrellBrad2 жыл бұрын

    Thanks for sharing those details. I have been wanting to make one since I saw you using one a few weeks ago on your 1:12 lathe build. Several nuggets in here that I would not have thought of (until I had to make a 2nd one LOL)

  • @joepie221

    @joepie221

    2 жыл бұрын

    This little handle grabs hard and gets a lot of use. Go ahead and make one.

  • @RustyInventions-wz6ir
    @RustyInventions-wz6ir7 ай бұрын

    Thanks Joe. I need to make one at some stage. Nice job

  • @joemiller5110
    @joemiller51103 жыл бұрын

    Thanks again Joe!

  • @bobwas4066
    @bobwas40663 жыл бұрын

    Wow Every Video is better then the last! lots of tips

  • @joepie221

    @joepie221

    3 жыл бұрын

    Glad you like them!

  • @grayskwerl4973
    @grayskwerl49733 жыл бұрын

    Another nice project. Thanks. Also, the mill vise jaw inserts were very interesting. +++

  • @joepie221

    @joepie221

    3 жыл бұрын

    Glad you like them!

  • @jdmccorful
    @jdmccorful3 жыл бұрын

    A thing of beauty.

  • @CraigLYoung
    @CraigLYoung3 жыл бұрын

    Thanks for sharing!

  • @Tezza120
    @Tezza1203 жыл бұрын

    Well timed video. A couple days ago I had to use a M2.5x0.45 tap into 4140 and used a pin vice because I had nothing else. I'll be whipping one of these up today! Cheers!

  • @joepie221

    @joepie221

    3 жыл бұрын

    Re-post a comment with how you liked it.

  • @Tezza120

    @Tezza120

    3 жыл бұрын

    @@joepie221 it's so cute but worked great!. I'm leagues off your skill but every day in the shop makes me a little better. Thanks so much for your dedication in sharing your knowledge.

  • @ProjectAnubisUSA
    @ProjectAnubisUSA2 жыл бұрын

    Cool tap slip trick!

  • @TomokosEnterprize
    @TomokosEnterprize3 жыл бұрын

    I saw this the other day and didn't have time to comment. While I was out at a friends shop I made one of these from, you guessed it, A gr 8 bolt. His ancient 3 speed belt drive lathe only turns automotive armatures and alternator rotors so it is different to see steel cuttings on the tray. Of course high speed tooling works best. What a little beauty.. As you say the feedback is great. Thanks a bunch. This was fun. Now I have to make another one as my partner fell in love with it so it lives in his tool box now, LOL.

  • @joepie221

    @joepie221

    3 жыл бұрын

    You better make a few.

  • @TomokosEnterprize

    @TomokosEnterprize

    3 жыл бұрын

    @@joepie221 They will make great xmas gifts. Thanks again Joe P.

  • @dempseytaylor3938
    @dempseytaylor39383 жыл бұрын

    Quick update, Joe. My students are really enjoying your videos as part of their online learning when we have to close campus during this pandemic. I appreciate the effort you put into creating this content and it gives me the opportunity to cover additional methods and techniques we probably wouldn't cover during the ten months I have to teach them the basics of manual machining. Thanks for your hard work and stay safe out there.

  • @joepie221

    @joepie221

    3 жыл бұрын

    Feel free to mention the school and course.

  • @dempseytaylor3938

    @dempseytaylor3938

    3 жыл бұрын

    @@joepie221 Gordon Cooper Technology Center, Precision Machining I (manual).

  • @cat02791
    @cat027912 жыл бұрын

    Really appreciated... Thanks for sharing it help very much. Thanks sir.

Келесі