Make Your Own Braun Cleaning Solution
Тәжірибелік нұсқаулар және стиль
Cleaning solution packs found at Amazon here: amzn.to/2A5I6CS
Find these in Canada here: amzn.to/2k9gupE
Find these in the UK here: amzn.to/2BXhfu1
www.electric-shaver-guide.com/...
If you're looking to make your own Braun Cleaning solution, here's an alternative I've had success with. For those who can't order the Braun Cleaning Cartridges at a sales price, this alternative will save you quite a bit of money.
Remember there may be other alternative solutions out there, but this is the only one I've actually tried, and it works well. To be on the safe side I will have to say to use it at your own risk, however I don't see how it will be a problem.
For those who can't order the Braun solution directly from Amazon.com, this alternative will save you a lot of money. Amazon.com already has the cleaning solution cartridges at a very reasonable price, however if you can't get them shipped to your location, other stores (local or online) usually charge much more. Therefore making your own cleaning solution is worth the savings.
Tyler is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com, Amazon.co.uk, Amazon.ca, Amazon.de
Пікірлер: 254
I've just been using straight rubbing alcohol for years now with my Braun. No scent, no water, just alcohol. Works fine.
@tonypalmer12
20 күн бұрын
That's making your own not this Shyt he saying
Another tip for people. If you leave the pack in the shaver, simple evaporation will decrease the fluid content. You can make one pack last longer by removing it and putting the cap back on.
@DnCs
6 жыл бұрын
MorteWulfe thanks for the tip mate , got mine today .
@SkinE-Vadee-Veechee
6 жыл бұрын
He covered that
@SpiderEternal
Жыл бұрын
I learned this the hard way. Although now that I can make the refill solution dirt cheap, it's not as big of a deal.
Thanks for this tip.I have made my own cleaning fluid following your instructions and adding lemon essential oil.This has worked wonderfully well and given a new lease of life to my old braun series 7 shaver that I originaly bought without the cleaning station to make the cost cheaper.The lemon oil does 3 things - it lubricates, it gives a nice fresh aroma to the cleaned shaver and finally lemon oil has anticeptic properties.I added 5ml of essential lemon oil to the 500ml bottle and this 1 in 100 ratio works fine.Thanks again and regards.
@travish4276
6 ай бұрын
Actually, I found a thread deep in the interwebs and found an engineer who formulated the stuff for a major manufacturer, and he stated you can use lemongrass essential oil and he specifically stated to use lemongrass essential oil and not lemon oil.
Man, this is really good for us. Thank you, you really create difference.
This is great for throwing away less plastic. I switched to an electric shaver to cut down on the number of things I throw out.
I've seen peppermint oil used instead of lemon oil. Apparently in leaves a fine oil coating on the metal which protects it against corrosion from the alcohol or water
@jovanjubert4046
5 жыл бұрын
Yeah there is an issue with not lubricating the shaver, I was instructed by Braun to lubricate the shaver to allow it to increase the foil longevity.
you can cut the rubbing alcohol by 1/3 with water and just add a small amount of any essential oils you want for a good fragrance. example: lemon. orange, patchouli , lavender, mint, cedar, rose, cinnamon, clove, eucalyptus, juniper, sage, menthol, tea tree, wintergreen, ect. about a half to a full teaspoon depending on how strong you want it to be.
@azitakhosravi6875
3 жыл бұрын
Hi Eric what kind of essensial oil can I use as a lubricant?
@ericlloyd663
3 жыл бұрын
@@azitakhosravi6875 what is the purpose of the application?
@azitakhosravi6875
3 жыл бұрын
@@ericlloyd663 For better and easy shave
@ericlloyd663
3 жыл бұрын
@@azitakhosravi6875 coconut oil or coco butter
@garybesaw
2 жыл бұрын
I've been using 70% to 90% rubbing alcohol and essential oil in my clean and renew cartridge. It really depends on what the stores have in stock as far as the rubbing alcohol. I make sure I clean the cartridge really well as opposed to some of these other guys in these videos which are just nasty. I probably changed the alcohol and essential oil after each time the battery needs to be charged. I find that the essential oils smell nice and do lubricate my skin.
And a big thanks to you too, for the detailed reviews. I would also like to mention that my shaver is the Series 7 model 745. I am sorry for the negative comments, the cleaning solution packs may produce better results but I will stick to the original cartridge!
I use 20% jack daniels, 20% corona, 20% scnapps, 5% absolute, 10% cranberry juice (organic only...better for lubrication), and 25% mocha Frappuccino . Works great!
alcohol + Alpha Keri oil and your good to go, its perfect mixture of cleaner plus lubricant for both the shaver and your skin the added fragrance from the Keri oil is an additional bonus.
Can you use the lemon oil that you can buy from a nutrition store like Now foods lemon oil? Thanks for the video.
Is it safe to use methylated spirit? Actually I'm using it for one year by now in my cleaning station (Braun series 7). Works fine with 50% demineralized water and 5 drops of ethereal oil (eucalyptus).
I just switched to a Braun series 7 after using Norelco for years. Do you think I could use some unused Norelco cleaning cartridges cleaning solution on the Braun?
I use an ultrasonic device to clean my shaver heads. It works well using hot water with or without soap.
Interesting video. Are you in Canada? I'm glad that I have the french name for that alcohol as I'm often in France.
Just bought a Braun so thanks for the video.
the link you have for Amazon is for the full pre-made packages. These are not the same thing as the refill solution.
would this work for the Philips Norelco JC303/52 Smartclean Replacement Cartridge
Does this also work with the Philips Senso Touch models, or is there the danger that the alcohol evaporates?
if you put essential lemon oil does it work,or does it show that it is empty?
Is this solution not affecting the skin or damage the shaver itself? Even using lemon essential oil in combination with alcohol? I read the comments below and people have said it is not good for the skin or the shaver? Can anyone clarify this?
could you use eucalyptus oil or tea tree oil, with the ispropyl liquid, the renew refills are expensive here in Australia, im not a fan of lemon or orange oil or fragrance so was curious about tea tree or eucalyptus instead
Do you know if one can replace isopropyl alcohol with ethyl alcohol to make the mix?
Does this work for the Philips 9000?
so the refill solution and lemon essential oil is really just for the smell?
I use a spoon full of clorox and rain water in one of the cleaning tubs, and then a tub full of just fresh rain water for final cleaning rinse. The clorox does a fine job of cleaning off grime and sanitizing electric razor heads, and I've used it for years. No ill affects to razor head blades or on face skin afterwards. For Braun and Phillips three headed razors.
@raytripp3772
8 жыл бұрын
+Colin Beadon Sorry to burst your bubble but Chlorine will corrode (eat) stainless steel it eats it! If in dought check it out on google that's why most company's do not use Clorox to clean anything stainless in the kitchen!
Is a barbicide solution a viable alternative to iso?
Those refill packs are now 8 bucks each when purchasing 3-4 packs. 12 dollars each when purchased individually.
The method I use costs virtually nothing if you save the used cartridges and works well for me. I simply strain the used Braun fluid through coffee filter paper. 2 or 3 used cartridges usually provide sufficient cleaning fluid to fill an empty one. The filtered fluid is clear and lemon yellow (no longer blue). Amazing how much gunk is left in the filter paper ;-) After washing an empty cartridge, allow it to dry thoroughly.
@robob221
4 жыл бұрын
Right but the coffee filter wouldn’t sanitize the fluid. The point of using new liquid is for the sanitization.
@robob221
4 жыл бұрын
BOBSON DUGNUTT ok. So alcohol fluid will stay sanitary forever, is this what you are saying? After it’s put through a filter?
@Josef_R
4 жыл бұрын
@@robob221 He's saying yes, it is, as long as it's still alcohol. When it's no longer alcohol, you should change it. Regardless, he's going to lose fluid due to evaporation, so his method will not last forever and will need to be topped up.
@smkngunzzz1843
Жыл бұрын
After all that filtering and reusing you’re basically cleaning your shaver with a degraded and ineffective solution. You’re not really “cleaning” at all🤦♂️.
Like many before me, I recommend about 5ml lemon essential oil with 500ml alcohol (I use rubbing alcohol, but I'm going to investigate denatured alcohol when I stock up further). I like my mix more than the original contents of the cartridge. Arguably I use too much lemon oil, but it smells lovely.
@gold3nrul311
5 жыл бұрын
Denatured alcohol is usually toxic to drink, Braun uses a specific kind that's "non-toxic" but it's much harder to get for the general public. It's better to just use Everclear 190 grain because it's ethanol just the same as "Denatured" but no impurity. Denaturing the alcohol provides absolutely zero benefit to a person using it on their face, it's only to make it undrinkable.
I still want to know why Philips shavers use a water based cleaner? Will isopropyl alcohol damage a Philips shaver? And what about shaver shebang?
where do you buy the packets that you add to the solution from???
In Australia it's harder to get rubbing alcohol in large bottles, although I did eventually find an electrical wiring store (?!) which sold 1 litre Isopropyl alcohol for $20. I've had it for 12 months and am only half way through the bottle. The trick is that you need to 1. clean, then fill the cleaning cartridge to only two-thirds, then 2. add 4ml of nail polish remover (eg Cutix...courtesy of my wife!) - otherwise the Braun unit won't detect the cartridge is full. Not sure why, but it works
Can you do away with the refill solution if you don't mind the scent of isopropyl alcohol?
Where can you get those tear packets, there's no link to buy them below?
What’s in the pack? The title says “make your own solution”. It’s not making your own if you still have to buy the pack.
The essential oil isn't just for the scent, it's also for the machine lubrication. It's important to keep it lubricated to prolong the life of the parts and provide a smoother shave. Alcohol only will require faster replacement of the blades and foil. As a manufacturer of an inexpensive and high-performing Clean & Renew replacement called Shaver Shebang, we have done quite a bit of testing of many formulations and have deep knowledge on this subject.
Hi guys Can I use 70% ethyl alcohol instead of isopropyline?
The product safety sheet lists Alcohol Denat., Fragrance, Citral and Limonene as ingredients
I have a Braun Series9 Sports and when I tried this with a cleaned cartridge the red error light comes and won't allow me to use the normal cleaning cycle. It works if I purchase a brand new cartridge cleaning solution. How do I reset this or how do I get around the red light error?
I tried your method and when placed the refilled one with the lemon scent you commented the clean and renew system thinks the cleaner is still empty. How does it sense this? I did exactly as you indicated in the video. Thoughts?
@MrBoo303
3 жыл бұрын
You must've overfilled the cartridge
I am trying straight 50% iso because it is what we have around, the base is accepting it just fine.
I have 2 Braun 5 series one with station the other one without. It recognises which shaver is without station because that main won't work in the station Why? It's a identical shaver
Thanks, but all that needs to be said in this video could be said in 30 seconds.
@falconsartzone1171
Жыл бұрын
True ikr
Will this work for the panasonic arc 5?
Thanks. I suspected this was mostly rubbing alcohol with some scent added. I'll just refill with that and maybe add some sandlewood oil for the scent. That's assuming that I feel the need to keep using the shaver bidet at all.
What about the lubricant that comes with the original?
Why not add some drops of oil, eventually to prevent wear and tear. BP turbine oil 2380 might be the solution?
I just filled the cartridge with isopropyl alcohol and it won't work, but I saw on the other video, it worked with isopropyl alcohol only with nothing else. Mine Braun bade still indicated empty when I put in the cartridge with isopropyl alcohol only.
FYI to anyone who uses Norelco shavers with HQ9 heads. I just picked up several packages of HQ9s for 9 bucks each at my local Walmart (Quincy MA). Walmart corporate MAY have discontinued these and replaced them with new numbers. In that case the discount would be national. Or it may be a local store decision. I don't know. All I can tell you is to check your nearby store. The packages may or may not say 9 dollars. Mine said 25 dollars so I decided to buy one, since 25 is a reasonable discount on an item that hardly ever sees a price reduction. Imagine my surprise when I got to the checkout and it rang up at 9 bucks! So I went and grabbed 2 more. I would have grabbed more but every razor has a lifespan. Don't know what that is but I'd be surprised if the battery and motor lasted beyond 3 of 4 head replacements.
Can I use 70 % alcohol and orange oil ....
Tried this, jammed up the cleaning station. Why I don’t know, but the station and the shaver got residue stuck on
i used 70 ISO. works fine.
hi, i do what you do exactly but my Clean&charge station keeps blinking a red water icon, which indicates that the fill is empty... but it has liquid already... what can i do?
@deecee6355
3 жыл бұрын
Open it up take it out and in again
I have a question. Which hole in the cartridge should you pour the clean solution into? Large or small, does it matter?
@JimInNashville
3 жыл бұрын
The small hole.
I noticed my shaver sort of smells like Old English furniture polish when it's done. Old English is basically just mineral oil and lemon fragrance. I wonder if mixing it with alcohol would work? Some sort of clipper oil would also make sense.
@davidson2004fatboy
3 жыл бұрын
jlmcgrot TRY LEMON PLEDGE
Can I use 200 Proof denarured alcohol as a cleaning solution?
What if you put only alcohol into it?
@deecee6355
3 жыл бұрын
It works
After experimenting with alcohol and essential oils and then going back to the original Braun cartridge I can only say that it just didn’t worth the trouble. The alternative solution leaves the head and the cleaning base filled with gray sludge. You can also clearly see it clogging the intermediate cutter and accumulating inside the head when removed. Also, the shaver leaves residue on the skin no matter how often you clean it and of course its performance is noticeably reduced.
I found alcohol already scented "evergreen" ..mint. works great, Braun keeps raising the prices of the Damn cleaner.
4 жыл бұрын
You can find it cheap on Amazon or eBay.
Where’s the link for the sachets
Good for philips too?
Did you tested adding the essential oil? Pls let me know, i wanna try this option
the catrige say that has SD ALCOHOL 40B is ethyl alcohol denatured with denatonium benzoate and t-butyl alcohol in accordance with 27CFR21, so there is noting about Isopropil
@kyraga
7 жыл бұрын
My cartridge says propan-2-ol which is Isopropyl alcohol.
What about lubrication? Original lubricating head
The original cleaning solution contains denatured alcohol, which is quite different than isopropylic alcohol. You should be using denatured alcohol which leaves much less residues when drying up than isopropylic alcohol.
@kevinmoss4908
10 жыл бұрын
Agree with Anita, Denatured Alcohol just means it has crap added to make it unpleasant to drink so it isn't taxed the same way and can be used in large quantities for industrial uses. So denatured alcohol likely has more unpleasant residue and is likely to be more irritating to your skin than isopropyl. Stick with anything labeled isopropyl or rubbing alcohol, both will be fine.
@Subparanon
10 жыл бұрын
Kevin Moss You're incorrect. Isoprypyl, rubbing, and denatured all evaporate leaving little to no residue behind. The reason you need to use denatured alcohol is that it does not act as strong as a solvent when it comes into contact with paint, plastic, and rubber. Rubbing alcohol and isopropyl do act as solvents on paint, rubber seals, and plastics. I made the mistake of using isopropyl alcohol when I first started doing this and ruined the paint on the head of my shaver, it pitted like it had been burned. It also dried out the gaskets in my base unit, increasing the rate at which the cleaning solution evaporates off.
@arete_
6 жыл бұрын
Subparanon Thanks for sharing. Do you know of any good products that I can buy from said ebay?
@wjbirm
6 жыл бұрын
I've used nothing but the Braun brand cartridges, purchased from Walmart, and my shaver head's paint is destroyed as well. So, I think that may bust your theory.
What if I don't want to use any scent in the alcohol ? When it dries up, it shouldn't leave any alcohol smell, right ? Where does all these bits of hair go when it cleans itself ?
@shinku5463
7 жыл бұрын
The cartridge contains a filter where it sits. but the finer bits ends up in the fluid inside the cartridge that's why its a nasty black color.
@timpoiu
4 жыл бұрын
using water under tap or just alcohol you need to put a drop of machine oil on each foil before use to lubricate the cutting edge. it will run cooler and the blade will last longer
The product safety sheet from P&G (Braun's parent) lists Alcohol Denat., Fragrance, Citral and Limonene as ingredients. Limonene also has lubricating properties.
I just rinse my shave under the faucet with warm water to get the shaving debris out. Once in a while I'll run the shaver for 10 seconds in a cup full of water and shampoo to get the heads as clean as possible. Then a final rinse under the faucet to get rid of the soap. Maybe I should oil the heads occasionallly, but so far it works.
@Larry
9 жыл бұрын
You should use some kind of alcohol or spirits every now and then just to disinfect the blades.
@PrivateEyeYiYi
9 жыл бұрын
***** That's what the shampoo is for. Same as washing didhes in detergent. I've never gotten sick from eating with stainless forks washed that way,
@Larry
9 жыл бұрын
PrivateEyeYiYi You wash forks with shampoo?
@PrivateEyeYiYi
9 жыл бұрын
***** Did I say that, or did I clearly say "detergent"?
@Larry
9 жыл бұрын
PrivateEyeYiYi Well you wash "didhes" in detergent. Whatever they are!
Can I directly use 70% isopropyl alcohol for my cleaning solution of braun electric shaver if I don't care about the scent?
@raytripp3772
8 жыл бұрын
+Salil Surendran well it's adding the oil for lube also for sent so your blades last longer
I'm using 70% alcohol and add half a teaspoon of olive oil. Been doing this for 1.5 year now and it seems to wor perfectly,
@wimvandezandt6373
9 жыл бұрын
Interesting combination... Don't know about the effect of lemon juice in a cleaning solution. However, I think you need to add at least a few drops of oil, because the moving parts need oiling.
@wimvandezandt6373
9 жыл бұрын
***** Seems perfect for energy shaving!
@user-iq7en1lg3i
5 жыл бұрын
waar koop je 70% alcohol?
@petervaes5554
5 жыл бұрын
@@user-iq7en1lg3i Bij je apotheek
@samparler840
3 жыл бұрын
@@user-iq7en1lg3i In het apotheek. Indien sterker, voeg water toe.
I tried doing it, however it did not work after refilling. I used red food coloring to see the color of the liquid, but it does not work for a reason
How about adding Aftershave for scent.
where I can buy the "refill packs"?
@nejack1
6 жыл бұрын
Amazon
@duaneclarke9891
5 жыл бұрын
Wal-Mart eBay bjs Sam's Club
Also my cleaning cartridge does not have marks for refill, just filled to bottom of holes on cartridge!
has anyone tried with ethanol instead of isopropyl alcohol?
@gold3nrul311
5 жыл бұрын
that's what the original cartridges use
can we use ethyl alcohol instead?
@gold3nrul311
5 жыл бұрын
yes, that's what Braun uses
This is the ingredients that is in the cleaning solution: Alphabisabolol Cosmacol ELI (Alkyllactat) Ethanol Lipold S 75 (Liposome) Partum (Fonfana) Vitamin E acetat The cleaning fluid is safe for the environment when disposed of. However, the plastic material in the container (cartridge) is not recyclable.
My cartridge won't fit down the toilet drain when I try to flush it.
also, what about a 99% isopropyl alcohol solution? will that damage it?
@krystianstepien5835
Жыл бұрын
Add 30% of tap water.
where can i buy refill pack?
@chrispantaleon8391
6 жыл бұрын
cliford estrella Amazon
No need to buy refill solution packs. You can buy essential oils in liter quantities for under $70 in some cases, good enough for a lifetime. I mix a little mineral oil with my alcohol along with Tree Tea essential oil for my sensitive skin. Avoid the citrus like lemon or orange EO IMO, because it causes photo-sensitivity.
@MrUniquemale
5 жыл бұрын
Niza Laporre can I use this stuff MINERAL OIL 350 VISCOSITY NF USP GRADE LUBRICANT by H&B Oils Center PURE 2 OZ
Has anyone ever thought about mixing isopropyl alcohol with barbercide?
@duaneclarke9891
5 жыл бұрын
Thought about it. I used my clipper spray after I wash it under water. Until I get the kit, that's what use
It should work if you put in the correct amount of essential oil. Many, but not all Clean & Renew bases detect the specific gravity or density of the solution. Too little it shows empty, and the same for too much, but that requires a heck of a lot essential oil! As a manufacturer of an inexpensive and high-performing Clean & Renew replacement called Shaver Shebang, we have done quite a bit of testing of many formulations and have deep knowledge on this subject.
Those cartridges at ccrrefil are not for the 9 series?? 9 series use ccr2 instead of ccr3 :(
@TheTomy669
7 жыл бұрын
is it true? what are the differance between ccr2 ccr3?
Don't forget the extra money for the alcohol. That totals about $30 for 3 refills. Shaver Shebang is a complete replacement and costs only $15.79 for 6 refills. It can be found on the Organek Living web site.
I don't know why the braun cleaning solution is made with alcool because alcool and hot water is really bad for the blades.
Just use everclear 190 grain. It's the same exact ingredient as Braun uses except it has no "impurity" that's required of denatured alcohol. Then just put a few drops of whatever oil lubricant u want... I guess Tea Tree oil would work, it's an antiseptic. Denatured alcohol is the same thing as Everclear (ethanol) except for trade purposes (taxes) it has to be "poisoned" so it's undrinkable, that's what the "denatured" means. The "poison" they use for Braun is actually just a bitterant (makes it taste horrible) so it's non-toxic for your face.
It is so hard to clean empty cartridges. All hair sticks bottom of it. Yours look like used 5-6 times.
@RobB-vz2vo
6 жыл бұрын
Add two drops of hair shampoo while cleaning; it quickly cleans the oil and hair out.
I have acne and sensitive skin what electric shaver is best ?
@lusidcrypto6390
8 жыл бұрын
+Clayton Paz Buy this. www.amazon.com/Braun-CoolTec-CT2CC-Shaving-System/dp/B00M4YY22W/ref=sr_1_6_a_it?ie=UTF8&qid=1462040436&sr=8-6&keywords=braun+cooltec
@Farseer1995
8 жыл бұрын
Hey man, I had the same problem. That's why I switched from traditional razors to electric shavers and things have gotten much better. I bought myself the Braun Series 5 with cleaning dock and in all honesty it's bloody amazing. If you have the extra cash go ahead and buy the best braun shaver, but I think any decent electric shaver will give you good results.
@kevinpaz1055
8 жыл бұрын
+Farseer1995 thanks man ! But I don't like dry shaving which mostly Braun makes
I go to home depot and buy de-natured alcohol. I just rinse out with water and fill it up. Been doing it for 15 years with no problem.
@gold3nrul311
5 жыл бұрын
You might get cancer on your face from the denaturing chemical the manufacturer uses. I mean it's just true. Especially from shaving where there are micro abrasions to your skin allowing any leftover denaturing ingredients to seep in. There's a reason Braun uses SDA 40 B and not Home Depot formulation
@branimirhorvatic9204
5 жыл бұрын
gold3n rul3 IT evaporates
@gold3nrul311
5 жыл бұрын
it evaporates after creating microabrasions into which molecular quantities may mix into the blood stream a la capillaries @@branimirhorvatic9204
@branimirhorvatic9204
5 жыл бұрын
@@gold3nrul311 You don't usually shave with a freshly cleaned razor that still has wet alcohol on it, right?
@gold3nrul311
5 жыл бұрын
How do you know that the denaturing chemicals evaporate the same way alcohol does? @@branimirhorvatic9204 It's still cheaper to buy grain alcohol and there's zero additional risk.
As has been mentioned, DO NOT SUBSTITUTE isopropyl alcohol for ethyl alcohol (yes, the same stuff in your scotch that has been "denatured" to make it undrinkable). You will probably damage your shaver as isopropyl alcohol is a much stronger solvent and will eat some plastics.
@MisterProducts
9 жыл бұрын
Jen Borgen So, Just use some ethyl alcohol with some type of oil?
@JimFortune
5 жыл бұрын
Maybe a Pina Colada? ;->
@HitFactorShootingSupplyLLC
Жыл бұрын
SDS says isopropyl alcohol is used - cdn.competec.ch/documents2/9/5/7/51712759/51712759.pdf
2:09 , please, save the water :) And the question: can you use Philips HQ200 for Braun CC station ? My wife bought for me Philips HQ200 by mistake.
nice
why not 90 or 100% alcohol? and i can do without the lemon oil.
@zillsburyy1
8 жыл бұрын
***** yeah i think it evaporates too quick
@Juggernath
5 жыл бұрын
90 or 100% won't properly disinfect the razor. There has to be water to allow the alcohol to cross the cells membrane and 70% is the sweet spot. Any lower than about 50% and there isn't enough alcohol to properly disinfect.
Best ingredient for cleaning anything is white vinegar. I use white vinegar, isopropyl alcohol and 3 drops of Dawn dishwashing liquid (for the skin oils). My brother uses Listerine mouthwash.
Allah Razı olsun kardeşşşşşş
ccr refills is fantastic!
@marchair
8 жыл бұрын
How do get the cartridge clean before refilling? I'm baffled as to how to get rid of all the whiskers inside. Cheers!
@rsimmons37
8 жыл бұрын
+March Air YUP!! Gap I think I'm going to buy a new cartridge. I add hot water and shake it around real good but you are correct that you can't get them all out
@marchair
8 жыл бұрын
Thanks for response! I was hoping to learn the secret trick…. LOL
@rsimmons37
8 жыл бұрын
You're welcome!
No, it will not damage it, but it's a waste of money. Just thin it with 30% to 40% water, but don't forget to add the essential oil for the lubrication. As a manufacturer of an inexpensive and high-performing Clean & Renew replacement called Shaver Shebang, we have done quite a bit of testing of many formulations and have deep knowledge on this subject.
42 drops is .07 oz..........or for those who want the other it is 2.1 ml
@anthonywaldrep5982
7 жыл бұрын
Jerry Gibson That worked perfectly! Thank you!!
@Eddi3Pwns
7 жыл бұрын
Anthony Waldrep So instead of adding those scent oil packets, 42 drops of an essential oil can be a replacer?
@anthonywaldrep5982
7 жыл бұрын
Eddi3Pwns Yes sir! I haven't had any problems since using this method. I used a glass dropper and lemon essential oil and it worked perfectly.
@gilles111
6 жыл бұрын
Learned in medical school many years ago, 20 drops = 1 ml.