More info in the description and check my DIY USB Analog handbrake here! kzread.info/dash/bejne/napkqLapgq-sfbw.html

@russellclarke1912

5 жыл бұрын

Wanna make me one an I'll pay and for postage I'm dumb

@2tempi_dave54

5 жыл бұрын

Do I need a pc for the PCB wiring??

@pasqualegallo5066

5 жыл бұрын

can you list all the components please ?, and I did not understand how to connect it I have a Logitech g29 can you explain me better? thank you

@myzee7259

5 жыл бұрын

Please .. just pleeeeaseee answer if it's working on ps4

@ugrailaszlo3960

3 жыл бұрын

@@myzee7259 if you use choose the direct in g29 controller wiring its work

Love it... finally someone taking steps to stop selling those ultra expensive PC racing accessories !

@amstudioprojects

7 жыл бұрын

Thanks +Mohsinwa

@oakleyway4337

7 жыл бұрын

amstudio where did you get the switch and Spring ect also would you consider selling them ??

@jonparkes3879

7 жыл бұрын

amstudio just wanted to say a big thank you. Used this video along with your g29 disassembly video to make my own handbrake. its awesome running my ps 4 with a bolt on handbrake and especially with psvr it feel like next generation gaming. Thanks again

01:11 Lmao nice music finger-sync

@byegena

3 жыл бұрын

NGL that was fite

you can literally sell these things! nice job!

@_google_user_

7 жыл бұрын

Sell me one for like 20 i cant find any part for this locally but wood nuts and bolt

@thevideogamer0mg99

7 жыл бұрын

Horse Power yea i have the same problem

@LorenzoDiFlorio

7 жыл бұрын

try to see my video, with only 15€ I do it something and work

@JesusKidsbr

6 жыл бұрын

shut up and take my money

@ryanpaps3781

5 жыл бұрын

Id honestly pay for one, sucks logitech doesn't make one

Thank you very much for this tutorial! I've made this handbrake at home and I love it! Been struggling for a few days to find some parts in our little city, but it was worth it. Already making some gameplays with it 💪

This made my life 100x easier now after searching for years after something easy like this! Thanks bro!

1:05 I was half expecting howtobasic to randomly come in to start throwing plates at the tubing

great tutorial, I've been searching for something like. the result is amazing, looks factory :)

@smow7422

7 жыл бұрын

Sir Bhima yea defenitely looks factory

@RobynTapps

7 жыл бұрын

Smow Alarmmacher except forthe hideous keyboard pcb exposed.. could have covered it with a wood box and then it would look factory

@sigurddamkjaernielsen5051

7 жыл бұрын

what kind of button is it?

@RobynTapps

7 жыл бұрын

Sigurd nielsen any momentary button will work.. as long as it momentary ON.

@JonPomGaming16

7 жыл бұрын

I believe the one he used is a SPDT changeover switch, you can wire it to be either open and closed with the button press or closed and opened with the button press.

Awesome tutorial! :D

Can't wait for DIY Wheels, Pedals and shifter nobs !

@weallneedlove1263

7 жыл бұрын

Those already exist lol

@muhammadhabibie6620

7 жыл бұрын

beeza copper would you kindly tell me which the best video about how to diy these things pls? appreciate

@weallneedlove1263

7 жыл бұрын

Not sure about videos but there are a lot of forum posts. For steering wheels search for OSW or direct drive steering wheels, pedals its best to search DIY hydraulic pedals

@muhammadhabibie6620

7 жыл бұрын

beeza copper Thank you..i made some research for osw, but its too expensive for my pocket xD. Maybe you can help me. i have some cheap driving wheel, it use potentiometer so basically no force feedback (but not a problem for me lol ).. what I want to do, is to make this wheel rotate 720 degree just like the common drive wheel.. what can i do? can i just change the potentiometer that has 720 degree turn?

best tutorial i seen for something like this to date.

You could put a spring on each side of the upright of the handle. Remove the spring at the bottom and have an actuator on top and bottom of the bottom part of the handle and make it a sequential shifter

@JK-xo9wm

Жыл бұрын

Yep, just needs another switch and you are ready to shift.

Had to ghetto up this setup for my desk but the PCB and switch totally worked, fantastic video :D

@devindavis665

2 жыл бұрын

How do you do the switch keyboard thing I can’t get it

Cool idea. A USB joystick works well too, found one at Goodwill for around 2 dollars and it works great as an e brake

This is a truly fantastic presentation of a fairly simple mod! Much appreciated.

@amstudioprojects

7 жыл бұрын

Thanks

Looks simple to build (well, kinda of) and looks so professional. I wanna try making this!

Awesome tutorial, will definately try this. hopefully without burning the house down! Always used TH8 shifter on sequential mode as a handbrake till now.

Great stuff bud . I use an old flight joystick , so I can have analog input on the E-break . But what you have created is elegant! Going to share with all my friends who are looking for handbrake solutions

@amstudioprojects

7 жыл бұрын

Thanks!

@DannyPhantomNYC

2 жыл бұрын

how does this work my old handbrake broke and i would like to fix it with a new pcb but idk how to make analog input instead of a button

@ari_seidel

Жыл бұрын

Does a flight joystick work as a handbrake on console?

@MaxC_1

Жыл бұрын

@@ari_seidel if it shows up as a Joystick in the Windows devices and stuff or in game then yes it can be used as Handbrake by configuring it in the game settings for controls

Why don't you make these and sell them? I'd happily pay 20-30 pounds for this.

@martin_240sx

5 жыл бұрын

I think the same haha

@dylanovzwoloud4091

5 жыл бұрын

Me 2

@salvadorianlivinginusa6660

5 жыл бұрын

That's what I'm thinking too

@markgodfrey100

5 жыл бұрын

04

@markgodfrey100

5 жыл бұрын

Sry 40

simple yet elegant, great job!

I was wondering about the electronics, that was really smart man!

okay at least i am not the only one that plays assetto corsa with the headlights open just because the dash looks better :D

Dude, if u sell this i will buy this. high quality man

Thanks for the help I'm halfway through mine. Got half a hacksaw for a handle and a much stronger spring with a more forgiving button and it feels great so far

@amstudioprojects

6 жыл бұрын

Nice work!

hi m8. i created one myself with your design in mind. i made a few improvisations like using a different switch and some other stuff. you inspired me to create this and it works perfectly. thanks.

awesome tutorial! i'd love to know the measurements of the wooden plate where you mounted all the parts on though :)

Been looking for 2hrs to find some one doing a build! Thanks for the video!!

@amstudioprojects

7 жыл бұрын

Thanks!

@JonPomGaming16

7 жыл бұрын

amstudio how do you get the solder to stick to the black coating on the banks of the keyboard pcb

@sigurddamkjaernielsen5051

7 жыл бұрын

what kind of button is it?

@michaelbaird1459

7 жыл бұрын

R u on pc or console, if console can option 2 be used

thank you! this is the best tutorial I've seen while looking for the past year. legend!

@amstudioprojects

7 жыл бұрын

Thanks Jarrad!

This one for sure i'll make! Your videos make it simple and easy. Nice DIY's mate thank you for sharing!

@amstudioprojects

7 жыл бұрын

Thanks!

Thanks! Just finished making mine, need to find a stiffer spring but otherwise it works like a charm 🤘 also made a mount for playseat

@lordofwar9431

2 жыл бұрын

Hey dude do u know if this works on Xbox one's I used the old keyboard method to make mine but no matter how hard I try I cannot map it to the handbrake on Forza

i really have to make one like this and add some buttons for my sim racing. great video btw, keep up the good work.

@amstudioprojects

7 жыл бұрын

Thanks Isak

@tobywhite330

7 жыл бұрын

Thanks for the tutorial how long are the screws that you use? and whats that bit you put on the screw just after the spring.

Thanks for the video. Wish I saw this through lockdown would have loved to give it a go with the spare time

such a awesome job there, thanks for the tutorial!

I just use a 3D joystick for my handbrake. works perfectly fine in Asseto Corsa or Dirt rally! Love it!

@Gizfreek

7 жыл бұрын

me too, modded a hydraulic hand brake and added a joystick from an old controller to get more than just a keystroke, works perfectly in AC

@Heksu99

7 жыл бұрын

change/fix the cord

@joshcutler6061

7 жыл бұрын

Would i be able to use a joystick as a handbrake with a logitech g920?

@descent8275

7 жыл бұрын

josh .cutler on a pc - yes. just plug it in and tell the game to use the joystick as a handbrake (button assignment) on a console? no idea if you can change buttons or anything like that. I've always seen pre sets. maybe the rule strikes again: "pc master race"

@michaelbaird1459

7 жыл бұрын

josh .cutler did u find anything to work on console for the g920

nice i dont necessarily like the short travle but i know how to modify the design to make mine how i like it thank you

thank you so much for your effort in this video it helped me specifically the wiring part of it

Good job, works first time, easy to follow! thanks

Great video! Do you have any links to what and were you bought everything? Also do you have any blueprints for the holes that you made? Would be awesome to be able to print it out and copy it ^^

That inspired me to make my own. Albeit made of wood and an old doorbell button to a Logitech precision USB controller.

@davionnit5211

3 жыл бұрын

aye thats pretty good idea!

That’s amazing! I’m totally making one!

Im not planing to do some of this great staff u make, couse i do not play race games but u got one more subscriber couse of ur great work. Cheers!!!

Nice Job! I think you should have the dimensions of elements with positions of screws in drawings (CAD),

This is amazing. i've been searching for this some time ago. Meine is a arcade joystick weld to a pc keyboard

You're the legend man, thanks!

wow very cool, thx, you can easily use this concept to make a sequential shifter

Wow, fantastic, but far beyond my ability to build :)

you should add a little hood for the movable parts end electronics to prevent spills and grime to mess upp this ingenious gadget!

@amstudioprojects

7 жыл бұрын

Yeah a cover is a good idea!

would this work for my ps4 I got thrustmaster t300rs and assetto corsa.... project cars

Dope AF man..And excellent tutorial

Nice setup

Awesome guide. Would you consider doing an analog handbrake?

@amstudioprojects

7 жыл бұрын

Thanks, if there is enough interest I will consider making a analog version.

@Hammimis

7 жыл бұрын

An analog handbrake would be fantastic!

@geanito

7 жыл бұрын

I think specially on Assetto Corsa. I don't know how it works while drifting. I don't like it, so I can't opine. But while driving rally cars, I feel the need a much more precise handbrake than just "On" "Off" with 100% force. That's why I think a analog handbrake would be nice.

@descent8275

7 жыл бұрын

use a 3D Joystick. So did I! works fine! just set the deadzone up for some inverting and 53-100%

@amstudioprojects

7 жыл бұрын

+Gean Gabriel, I have started looking into making the analog version. I can build a full custom analog hydraulic version and show the process but I believe this will become expensive. So making a cheaper analog version with some off the shelf parts and minimal fabrication might be the way. What features and limits are you looking for in this design? for example - total cost, what games must it work on, amount of fabrication, ect. Thanks

amazing....thanks for the tutorial and the decryption of the parts you used.....i will so it also

Just made one like in the video and really works!

kinda looks like you can make this into a Sequential Shifter as well

nice but some dimensions and a part list would be nice, and where the heck do you buy the light stand on its own?

@amstudioprojects

7 жыл бұрын

I had the light stand already from a broken led light. You can use any metal pole/handle just adapt the same concept using a pivot point and a spring return.

@Ajaxster

7 жыл бұрын

fair enough i guess thanks for the video!

@muhammadhabibie6620

7 жыл бұрын

amstudio THANK YOU SO MUCH!! THIS IS SIMPLE AND BEAUTIFUL. Now, my request is pls make video about how to make sequential shifter, based on this project.. appreciate!!

@zachmiller9175

5 жыл бұрын

@@muhammadhabibie6620 same thing but another switch in the other direction

@thomasmurray8193

3 жыл бұрын

@@muhammadhabibie6620 if you want to make it a sequential shifter you can just put a switch below it as well.

Thanks for making a really good vid on how to make a gear stick for gaming

im just wondering if on the PCB i need a perfect connection, when i touch the multimeter pins togheter i get a 0 but the connection on the PCB never reaches 0. hopefully this makes sense

THought that was a weird setup, then i remembered the left side of the road.

Hey nice handbrake, but i think better way is use potentiometer for smooth braking. I did mine few years ago from old joystick, I simply used potentiometer from one axis and gave it as pivot to my elementary handbrake. It worked very well. Your looks nice, like in race car ;)

@lordofwar9431

2 жыл бұрын

Do you think a standard push on switch would work u seem to know what your talking about mate

@MaxC_1

Жыл бұрын

@@lordofwar9431 A potentiometer gives you analog control and allows you to either brake hard or lesser like a real eBrake. A switch gives you either ON/OFF so either 100% braking on eBrake or none. Potentiometer for finer braking like in a real car, switch if you want to do full braking or none

Nice thanks for the wiring diagram I wouldn't have figured it out btw this setup will work on lfs?

cool and embarrassingly better than one i build. great job!

It would be nice to make separate videos talking about every step and the wiring job

@abex5287

6 жыл бұрын

Chris Lee there was everything what u need to know :)

This is great. 3 questions though: •Does it work on a PS4 (and what games if so) •Where did you get the spring •Can you buy a PCB on its own

@amstudioprojects

6 жыл бұрын

Wired to a wheel button, it will work on console. You can find a spring at a hardware shop or on eBay. Yes you can buy a Joystick encoder(PC).

@Darth_Swom

4 жыл бұрын

@@amstudioprojects will it work if you plug the usb straight into the ps4? or do you have to wire it to a button on the steering wheel?

I cant use this with my g290, it will only let me use it alongside a keyboard. do you know why that is?

Thanks, this is amazing. Is there any way you could provide plans even just a pattern/measurements where to drill holes and what not?

Why don't you sell these?

Is it works with Logitech Driving Force GT?

@tommeiner9983

6 жыл бұрын

It works without a steering wheel, too. It's a full independent USB device. It doesn't need a wheel or anything to work.

I made mine with a bigger travel and also added a potentiometer for analog input. Now I'm trying to make a sequential shifter using the stick that I used to have on my MX5.

what would be the measures of the main mdf, where the pcb and the handbrake fit?

Do these wheels provide any resistance? Or is it on a free hub?

@LirokuToragi

7 жыл бұрын

Blackout TwiZt they have force feedback with soft locks. The Logitech gaming software allows you to change it if you want to disable resistance, reduce it, or change the amount of rotations the wheel can make(up to 900 degrees I believe).

I made my hand brake, but the problem came up, namely when I press the "u" button as a handbrake it straightens the front wheels. What can I do with this? Forza Horizon 4.

@pixel8122

4 жыл бұрын

Forza is meant for controller, they dont support wheels and sim gear to its fullest. Try Assetto Corsa

How do you set it up in Corsa assetto? with logitech g27 steering wheel

cool I've been planning to make something like that for a helicopter collective, except I'll have to use a potentiometer, and mount the handle to it.

Good idea! ;-)

@amstudioprojects

7 жыл бұрын

Thanks

i would buy one

nice man! thumbs up for you. i also notice that you drive an bmw wich makes it extra nice :D haha

Interesting Video! Good Music Choice

Can you sell it, how much 1 kit already assembled?

Will this work with my thrustmaster Ferrari 458 spider Xbox one wheel?

@eduardoseitz5125

7 жыл бұрын

EB997 Jesse yes

@averagebogan7723

7 жыл бұрын

Eduardo Seitz thanks

Hello! since you have attached the wire to that panel? (4:22)

This is awesome, great job, so gonna use the same technique to build a sequentail shifter as well.

@amstudioprojects

7 жыл бұрын

Thanks +AndyPants550. Yes, I will be using a similar concept to build a sequential.

Connect the handbrake to an arduino leonardo, then into the computer via USB

@magnuswf

7 жыл бұрын

Why would that be better?

@antonnpn9063

7 жыл бұрын

Easier and less damage on shit

@magnuswf

7 жыл бұрын

Damage on what shit? And soldering the wires to any old keyboard would be almost free, if not completely free, and simpler as it won't require coding at all

@magnuswf

7 жыл бұрын

How about calming yourself a bit? Say hi to Cornelia from me.. Swedish fuck

@menzac8892

7 жыл бұрын

oh god... Staaahp. Of course this is a good option if someone hate soldering or is really bad at it. Also, some people dont have any spare keyboard to destroy...

Does this work on Xbox one?

@myzee7259

5 жыл бұрын

Please someone answer 😥😥😥

Hey mate, on my g27 can I wire a 2 position switch on one of those 4 red buttons on the shifter? It would act like a range selector similar to skrs csio. Your usb mod wont work on PS3. Thanks

PCB DIY with no hot glue? Incredible!

IF you make use of "Nyloc nuts" instead of the normal ones.. They won't come done that easy

Knowledge is a wonderful.

@MK-U-N

7 жыл бұрын

Jack Hammer 😂

@dmcpartlin17

7 жыл бұрын

Jack Hammer top kek 2 u m8

Where did you get the bracket to support the spring, rubber stop, the spring assembly?

Could this be make into a sequential shifter with a couple more parts?

Very Nice tutorial. does this work also on ps4? anyway i subscribe

@JGWalrus

7 жыл бұрын

If you wired it into the pcb of the controller at whatever button activates the handbrake it would

@spike4850

7 жыл бұрын

spino hey jimmy

can u make tutorial for flight simulator

@justinnigel3822

5 жыл бұрын

Why do you want a handbrake for a flight sim

nice you showed everything and this help me make my own

can u design on that has more travel in the lever

Can you do this to a wheel for Xbox one or PS4?

@amstudioprojects

7 жыл бұрын

Yes, wired directly to the wheel is the option for those consoles.

@lukeaumuller1268

7 жыл бұрын

amstudio Thank you very much!

@amstudioprojects

7 жыл бұрын

You could also try finding a cheap wired controller that works for the system and wiring the handbrake to it.

@lukeaumuller1268

7 жыл бұрын

Smart idea, I might give it a go. Thanks for the help!

@joaonunes6608

7 жыл бұрын

Luke Aumuller have you solved it? What wired controller did you use?

Damn, I wish I found out about this channel before I sold my wheel

If i want it on ps4 but dont want to open the hole racing wheel, can i just plug my keyboard to the ps4 usb, and then use number 2 method?

Nice and clean work ! Lovin it !

@amstudioprojects

7 жыл бұрын

Thanks!

i think you can buy a real hand brake lever for the price of these components and build it on that instead. heck you might even get one free at a scrap yard.

@TotallyOnPurpose

7 жыл бұрын

GraveUypo yeah but you've still got to link all the electronic to it...

@AnthonyVisuals

7 жыл бұрын

TotallyOnPurpose that's easy

@decxterous6112

7 жыл бұрын

agreed. and it would look awesome, heck if you are that into it and you have some decent skills behind you do what I did and use scrap cars interior and steering wheel to make you set up even better. NOTE* this option would take you a while........ Hahahahaahahahah.... and cost a lot more. not too much though ;)

@elliott9999999

7 жыл бұрын

GraveUypo what scrap yard do you go to that gives away parts...

@AnthonyVisuals

7 жыл бұрын

Elliott Fontaine Where do you live?

5:56 when she first time does it for you :D

awesome work, dude 🤘