Make Recyled 3D-Pritning Filament | Extruder Line Setup
Ғылым және технология
How we turn plastic waste into 3D printing filament.
A brief insight into the research and development of recycled 3D printing filament. 🔬♻️
After dozens of material analyses and tests, the manufacturing process is slowly taking its final shape. The whole thing now has to run a bit more reliably and faster, then sales can start.🚀
A few test spools have already been sent out.📦
The first rolls of ASA QiTech filament will soon be available for pre-order on our website. 🚀
More insights into production are on Instagram/Facebook (@qitech.de).
More information about the JARVIS machines can be found on the QiTech Industries YT channel.
QiTech UG (Haftungsbeschränkt)
--
Web: www.qitech.de
Insta: @qitech.de
Mail: info@qitech.de
--
Пікірлер: 29
Someday I will get there.. awesome set up.
@milan.vdb_QiTech
3 жыл бұрын
Haha are you Building a extrusion line too?
congrats exellent extruder
@milan.vdb_QiTech
3 жыл бұрын
Thank you!!
Awesome set up! Quick question, have you ever had problems with the filament bulging when it’s coming out of the extruder? I also recycle into filament and it continues to bulge to about +.30mm every 10-15 meters.
@milan.vdb_QiTech
3 жыл бұрын
Thanks bro! Yeah I had tons of problems with that the trick was for me to really properly dry the Granulat before extrusion we made a HOW To on that it’s on KZread at QiTech Industries
Good machine thanks for sharing, Can you extrude a pipe of say 6mm and 0.5mm wall thickness on this type of machine
Hut ab, Hammer Anlage! Ich struggle ziemlich beim Zusammenstellen von meiner, da Einzelteile für den Anlagenbau sind echt nicht einfach aufzutreiben sind. Hast du Komponenten wie die Förderschnecke selber hergestellt oder "lediglich" angepasst?
@qitechde
3 ай бұрын
Hi Fallaxt, Wir kaufen die Schnecken und Zylinder bei "GROCHE" in deutschland, die machen ziemlich gute nitrierte schnecken etc. Ansonsten kann man industrie Auktionen gut teile schießen, so haben wir das zu garagen zeiten gemacht. Wenn du konkrete teile brauchst können wir die dir vlt mit etwas marge weitergeben da wir ja jetzt sowas in serie bauen, meld dich dann einfach per email bei info@qitech.de Grüße aus Darmstadt, Milan
VEry nice DesiGn
@milan.vdb_QiTech
3 жыл бұрын
Thank you!!
what kind of plastic your using
@qitechde
3 жыл бұрын
Industrial waste (ASA)
How do you make sure uniform thickness bro. I am curious on this. As far as I understand, the temperature, filament pulling speed etc determines the thickness (obviously the nozzle dia)
@qitechde
Жыл бұрын
by now we have a Laser diameter guage, at the start we used a simple caliper all the time
Wie macht ihr das das der Spool-Getriebemotor 20m/s wickeln kann? Können das auch die TMC Treiber?
@milan.vdb_QiTech
3 жыл бұрын
20 Meter die Minute haha nicht 20 Meter die Sekunde. Aber ja wir haben die TMC Treiber so programmiert das die weniger microstepping machen wenn man auf hohe Geschwindigkeiten geht
@RaphaelOE.
3 жыл бұрын
@@milan.vdb_QiTech haha ich meinte natürlich 20meter die minute aber bekommt man das mit 1/1 stepps hin wenn man das getriebe auch noch hat?
@milan.vdb_QiTech
3 жыл бұрын
@@RaphaelOE. jo ich hab dafür so direkt Port Manipulation gecoded also das Arduino ports bitweise überschreiben damit kann man dann Ultra schnell steppen, digital.High oder digital low oder accelstepper Befehle sind da limitierender
hi sir can you tell me the difference between using air and water cooling sytem ?
@qitechde
Жыл бұрын
Yes - check out the video on the jarvis airpath on qitech industries
What are the tolerances?
@milan.vdb_QiTech
3 жыл бұрын
Depends on speed and temps
@milan.vdb_QiTech
3 жыл бұрын
About 0,04
@milan.vdb_QiTech
3 жыл бұрын
Though I’m still coding on the diameter control once it’s done I will know for sure
@milan.vdb_QiTech
3 жыл бұрын
Diameter control is in beta now. We have toleneces of 0.03 for ASA
@the_biggest_chungus7508
2 жыл бұрын
@@milan.vdb_QiTech wie viel Energie verbraucht der Extruder eigentlich so ungefähr? Bei der großen Heizmanschette doch bestimmt 2kW in Summe... oder?
Lies
@qitechde
Жыл бұрын
?