Waylon’s going to have more CNC and business knowledge by the time he’s 10 then all my 30 plus years of woodworking. What a a privilege.

@cutting-it-close

4 ай бұрын

I can’t wait to teach him!

Congratulations on your son. What a great video, and thanks for sharing it with all of us.

@cutting-it-close

4 ай бұрын

Your welcome! I hope it helps!

Congratulations on your son Waylon. I pray you have tons of fun with him thru the years to come. I know I have with all 4 of my sons, 4 grandsons and 3 granddaughters!

@cutting-it-close

4 ай бұрын

That’s awesome! This is just the first step along the journey for sure

As a woodworker I love it, as a designer the kerning is killing me!

Love the look of these, and the way Waylon pops with the darker wood.

Congratulations on your impending fatherhood! The very best to you and your growing family! Give my best to Waylon when you see him!

It seems that Waylon has a good DAD for making him these types of things. Great Job.

Congrats on the new baby! I’m sure Waylon will be out in the shop as soon as he can walk. Get some dust collection to protect both of you!

A future maker in the making! Waylon is sure to be inspired by your creativity. Congratulations, and may your family be blessed with endless happiness .

Thank you for the presentation! I love your presentations with all the information and educational time you give us. Congratulations to you, your wife, and the rest of your family on your next son! Sending y'all warm thoughts and prayers!!!

@cutting-it-close

4 ай бұрын

So nice of you

Waylon I just started CNCing these are great tips Thanks

Congrats on your impending fatherhood. Waylon is going to have some pretty cool toys to play with and some awesome life skills to pass along to his kids. I am so thankful you put this video oul. I just had someone ask me for one of these and I was trying to figure out the offset/pocket allowance. I didnt know you could do it in the toolpath. I was trying to offset in the design and the letters with center pieces were coming out wonky. I wish more content creators would take the time to share the design process without talking for hours. I watched the design section 4-5 times and went and created it in V-Carve in just a few minutes. Thanks!!!

That's Awesome to be an expecting Dad Congrats!!! I'm sure Waylon will enjoy his name puzzle BTW Thanks for another Great Video!!!

@cutting-it-close

4 ай бұрын

Thanks again!

Congrats on the addition to your team! Love the name choice. Don’t forget to promote your food safe finish over those painted ones! You could add little magnets on the letters/pockets so it can be hung as a sign before/after the age they play with it. Or, double sided tape may be safer!

@cutting-it-close

4 ай бұрын

Yes, great ideas, thank you!

Congratulations to your family and especially to Waylon’s upcoming arrival. Great project idea. It makes a lot of sense to batch out some letters beforehand.

@cutting-it-close

4 ай бұрын

Thanks so much!

Congrats on your son Waylon. Thanks for the tip of the pocket allowance. Never noticed it before in the software.

@cutting-it-close

4 ай бұрын

I use it all the time! I use it with inlays all the time as well

Your design looks really wonderful... I can see that your processes are very meticulous and you try to make the whole process have a good finish. Congratulations for your job and you just gained one more subscriber to your channel...👍🧡

Best of luck with the upcoming arrival of Waylon. Your life will never be the same, but better!

@cutting-it-close

4 ай бұрын

I am very excited! But nervous as well

Always enjoy your videos man! 👍

@cutting-it-close

4 ай бұрын

I appreciate that!

Great tips, great video & an even greater project/job!! Also Congrats on becoming a new dad as well, & I know he’ll soon (as quickly as time flys by nowadays) enjoy playing with that puzzle🧩 the most! I wish you nothing but great things ahead! Take Care & God Bless!✌️

Congratulations on your son, Waylon. Thank you for sharing your video. I am new to the cnc world.

@cutting-it-close

4 ай бұрын

Welcome! And thank you for the kind words!

Great project! Congrats on your son!

WAYLON - great and very interesting name. Congratulations! Great video(s)!

@cutting-it-close

4 ай бұрын

Thank you kindly

Congratulations with your son WAYLON. I understand your joy I have 6 kids forme 21 to 1 1/2 years old.

@cutting-it-close

4 ай бұрын

That’s my dream man! Lots of kids, it’s going to be fun!

Thanks a lot for another great informative video, and congratulations on the upcoming blessing that Waylon is going to be in your life!!!

@cutting-it-close

4 ай бұрын

Thanks 👍

Love the content! The giveaways are really cool too!

@cutting-it-close

4 ай бұрын

Good! I hope you win one of them!

Congrats on your son Waylon. Great video

@cutting-it-close

4 ай бұрын

Thank you!

What a nice idea you gave me! Gonna test how it sells here locally for me. Thank you and thanks Waylon as well ;)

@cutting-it-close

4 ай бұрын

Have fun!

Congratulations on Waylon.

G,day Ryan, Congratulations on your soon-to-be-born son Waylon, I'm not too sure if you should put a CNC project in his hand or a guitar, maybe both. Great video and it's a nice idea for the giveaway, But sadly it looks like it's only for the guys in the USA, Mate, I'm here in Australia and very new to the world of CNC. The CNC bits would be good to have if you want to send them to a Land Down Under. I used to be an Upholsterer for many years but had to give it up due to two lower back ops, ( ouch ) So while recovering from the ops, I was surfing the net and saw people doing CNC projects, which looked awesome. So I thought, I can do that. The adventure started, and I ended up building my own CNC. For someone with no electrical or mechanical/engineering knowledge, I managed to build a reasonable CNC with a working table space of 1200mm x 1000mm and it works very well. I watched and learned from different guys on KZread on how CNC machines are made. Whether you respond or not, Thank you for the great videos that you put on KZread. Kind regards, Michael

Congratulation on Waylon soon arrival.

@cutting-it-close

4 ай бұрын

Thank you very much!

Congratulations on the news of Waylon! Great format. Is the double sided tape tesa tape? Some well glued magnet to hold the letters in might be good?.Keep up the great work.

@cutting-it-close

4 ай бұрын

Thank you so much! And the link for the double sided tape is on the description :)

Waylon will take over dad's business in kindergarten, LOL

Great video. Great name for future son. Congratulations to you and your wife.

@cutting-it-close

4 ай бұрын

Thank you!

Nice Job, Waylon is a great name. start saving email names. That's what I did for my kids.!

Yea CNC videos. Congratulations on your announcement of your son. When you do the last pass (onion skin pass) do you change the cutter diameter so it removes an additional .005 ? It could assist in removing the lines from previous passes. Also plunge cut vs ramp cut what would be better?

@cutting-it-close

4 ай бұрын

I always ramp, and I don’t change the diameter, I just use an offset when I am doing the profile toolpath.

Congrats on your son Waylon

Guess I missed this one. Good job’

@cutting-it-close

2 ай бұрын

Thank you Rob!

Congrats on little Waylon! That’s exciting. Now, if you really want to raise his right, teach him to be a Sooner fan (no Aggie’s)! 😀. But seriously, I LOVE this project!

@cutting-it-close

4 ай бұрын

That’s a tall order, my boy will hopefully Bleed maroon for a long time! But if I had to have a 2nd choice it would be Oklahoma

Great video as always and congrats on your son Waylon! I do appreciate you showing the whole process of this project from start to finish. Your success story has inspired me to want to get into the CNC world. I see you are using Aspire software. Is that a CNC modeling software you would recommend for first time users?

@cutting-it-close

4 ай бұрын

Yes, but I would start with V-Carve Pro

Wow, Waylon is already getting primo stuff!

Congratulations on your first child! I have a question though....Why didn't you use a roundover bit to router the edges on the cnc table? Just wondering....

@cutting-it-close

4 ай бұрын

Great question! Because I had to router the backside of the maple with a router anyways, I didn’t feel like doing a tool change on the CNC to only router one side.

And Waylon is his name o… ;) Thanks for the inspiring videos!

@cutting-it-close

4 ай бұрын

You got it!

Wish I could get my cnc to work..

New subie!🎉

@cutting-it-close

2 ай бұрын

Thanks for joining, I’ll have a video soon! What made you want to sub?

@sabelomanzini9923

2 ай бұрын

@@cutting-it-close I'm a South African, and this may be a great business oppertunity for me. Plus I love wood work, but have always been fearful to start. Your videos, content and transparency help me to overcome those fears

Greetings from Serbia again! Great and beautiful item to make and sell! Dear, I was wondering if you could do a video about cutting acrylic on CNC, and about differences compared to cutting wood... Speeds and feeds, step down and step overs for wood and for acrylic, for the same size of bit... Thanks in advance, and we all wait for the happy news...

@cutting-it-close

4 ай бұрын

I’ll get to work on that video!

@Pedja-J7

4 ай бұрын

@@cutting-it-close I am sorry, on one on my previous comments, you said you want to discuss some interesting things with me ... But I didn't really understand how should we do it... I thought you send me some mobile phone number...so through watts up, or sms... I'll be glad to make friends with you... Greetings again from Serbia!

feels like everyone is making name puzzles, in chairs, stools, tables etc

@cutting-it-close

4 ай бұрын

They’re lucrative right now!

Ryan, love your content. Which CNC Machine are you using in this video?

@cutting-it-close

4 ай бұрын

Laguna IQ

@raysalvador7573

3 ай бұрын

@@cutting-it-close Thank You! I am considering getting another CNC machine. Currently, I have the CNC4newbies HSNC4896RP (work space: 48"x96")--I love it but I almost never use the entire workspace. I work out of my garage and move frequently (2-3yrs/Military). What would you recommend? - 5 years of [hobbyist] CNC experience - Desire something just below industrial level and supports a small business - work horse Current setup: - HSNC4896RP (DIY mobile base on casters **i know--its not sturdy) - Demon Controller - 2.2kw VFD spindle

Congrats on Waylon (in advance). What brand is your CNC in this video?

@cutting-it-close

4 ай бұрын

Laguna IQ

Since this is as you say a "money maker" how many are you doing per day? What are you charging? Are the people your selling to individuals, groups, gift shops, instagram, facebook marketplace, google ads, your own website and which are the most useful.

@cutting-it-close

4 ай бұрын

I cover that in the video towards the end

Waylon....congrats! 🎉🍼👶

@cutting-it-close

4 ай бұрын

Thank you! Very excited!

Congrats on having your first son Waylon! Awesome strong name from a hard working family is what makes our next generation stand out. Just glad you didn’t go with “Leaf” or some shit like that. lol

@cutting-it-close

4 ай бұрын

Same here, I can’t wait for him to be in the shop sanding and making stuff!

What font did you use for this? I can't find on that the 1/4 dc can fit in all of the areas. Congrats on your son!

@cutting-it-close

3 ай бұрын

I designed the font myself so a 1/4 but can fit in all of the areas. Not trying to promo it, but I do have it on my website. I spent a lot of time designing that font just for that reason!

@hudsrob1

3 ай бұрын

@@cutting-it-close I totally understand and will get it from your site. Thanks!

Waylon

Waylon is a great name... Makes me think of Waylon Jennings

@cutting-it-close

4 ай бұрын

Exactly, I’m trying to convince the wife to name the next two Willie and Hank. I want to call them the highwayman. Haha

My grandsons name is Waylon. Good name. Congratulations.

@cutting-it-close

4 ай бұрын

Thank you!

Hello. I trust you are well. What oil did you use?

@cutting-it-close

4 ай бұрын

food grade mineral oil

@CantBelieveEyes

4 ай бұрын

Great! And thats enough to seal it?​@cutting-it-close

@cutting-it-close

4 ай бұрын

Works like a charm! @@CantBelieveEyes

@CantBelieveEyes

4 ай бұрын

From my experience with food grade mineral oil is that it takes a while to dry. How long do you guys typically let it dry for? I mostly use it on birch ply. @@cutting-it-close

what is the depth you use for the eeg shell (IE 0.001 ?)

@cutting-it-close

4 ай бұрын

The thickness depends on material, but usually .03 inches

@AcrylicMemories

4 ай бұрын

@@cutting-it-close Thanks

Here's my problem. I can't seem to figure out why my cnc won't cut the right way. I have it all put in and I just can't get it to run other than a damn air trial

Maple syrup

Needed 13 more seconds.

Can't these be made for 10 cents if you order from China?

High profit cnc project how is that ?? Read the terms of buying the file says.. Strictly No Sharing or Reselling, Copyright Ownership, For Personal Use Only.. These rules are for the file only or what they are intended to make ?

@cutting-it-close

4 ай бұрын

It’s the rules for the digital file only, make and sell the letters as much as you can!

now you are going to experience true love for someone

kinda Odd that you (someone) deleted my comment, I thought I had offered lots on insight, that would of helped others make it.

Waylon

Waylon

Waylon