Forget about the DIY filter. The tank looks awesome. I just love hair grass in aquariums. Adding those rocks made it so cool.

@diyformyhome2265

4 жыл бұрын

tks u so much!!!

@draven4464

3 жыл бұрын

Yeah, cause who gives a fuck about the health of the fish, or having to scrub it 24/7 for the sake of not doing some very basic additional work

If you happen to have everything on hand, this is pretty cool. If you have to buy everything, there are less expensive small cannister filters currently on the market.

@diyformyhome2265

2 жыл бұрын

Yes, I totally agree with you, But, My place is only a small town. I cant buy the little filter for my fishtank.For that reason, I have to reuse everything I can find near where I live, Sometimes DYIng something will be more expensive than what we can buy. but it really is not crucial because DIY is also my interest.

Great video. I've been thinking about how I want to design a canister filter for my betta's tank, and in my head I was going to put the submersible pump inside the aquarium itself and have the canister inline with the output. I'm going to redesign that with the pump inside the canister instead, as you did. This way there's much less in the aquarium itself, and it looks cleaner. Also, to those wondering about the power supply and voltage regulator (blue chip with the numbers), you could easily do this more simply with a 5v cellphone charger (no longer adjustable), or by using a pump with variable flow dial. They did this so they can adjust the flow rate manually by changing how much power the pump is given.

@diyformyhome2265

4 жыл бұрын

Thanks for your comment. This is the filter with small version from big filter of fish tank.Because I can't found the pump mini have the adjustment function . So, I have to use control voltage module.

@Ummmmmkay88

3 жыл бұрын

Just get a sponge filter…

This is a good idea if you want to taylor a filter to suit your particular needs. As for those internal filters others are talking about. The ones I had were always breaking down.

Wow! Loved this, what a great hack

This was an awesome vid. There are many bones one could pick, and they are true: if this leaks, it'll siphon the tank... The silicon will crack over time, I could just buy another type of filter for cheaper, etc., But I don't think those, legitimate as they may be, were the point of the video. This diy project crosses my line of diminishing returns too, by far! I don't have the electrical items, the drill and bit, nor the knowledge OR TIME, just lying around to make this efficient for ME. Nor am I a diy fanatic. But for the masses of people who do, this sharing is a creative idea. The possibilities are limitless. Even an Applied Science teacher would love this! Regardless of purpose or choice, this was super interesting. Thank you.

@tauncfester3022

4 жыл бұрын

PE plastic and hot glue..( not silicone..) remain flexible for decades if you keep it inside out of the sun

@ryleekawasugi3610

4 жыл бұрын

Additionally, most of the small/nano filters that can be commercially obtained/"PNP", do not provide the quality of filtration which can be manipulated in a DIY construction like this. In a DIY project like this, we can control the amount and type of physical media, carbon/charcoal as well as biological media as we see fit. Just the ceramic pieces he used, compared to any small Tetra, Eheim, Fluval, Aqueon (etc.) Internal or External HOB filter, will provide EXPONENTIALLY greater supporting beneficial bacteria colonies. Again, depends on your purpose, ...and if you have the resources...and necessity is the mother of ingenuity, right? And see, people are sharing links now and have offered insight beyond the education of this video. We might not have agreed with this DIY project nor been inspired to replicate it, but it has indeed triggered growth in our aquarium hobby and a dialogue. Not only is that a "win", but further evidence of a brilliant and influential video. Cheers! Now I'm gonna change water and maintain all my store bought filters haha. And maybe one day look back to this vid for inspiration. "Over and Out."

우와 아이디어 좋네여 외부여과기가 뚝딱ㅋ

These are great and plus very informative!! Keep going mate!

good idea! i would just tell to use propper silicon, not hot glue, it will get all white and brittle soon and leak!

@tauncfester3022

4 жыл бұрын

Been building DIY aquarium safe filters and accessories for 38 years now. Hot Glue doesn't get brittle and if done correctly doesn't leak either. Give this guy his chops, he just built a mini canister which you can't buy in this size for less than an Azoo turtle canister. and it has adjustable speed on the motor. So show me a canister filter with a brushless DC pump motor with variable speed?

@krambek

4 жыл бұрын

@Runer Warlock is this hot glue toxic for fishes?

I prefer this type of external filter, it takes up less space inside the tank and doesn't make the tank's internal environment look ugly with a monstrous hideous black box.

Absolutely brilliant kiddo!

Technically beyond my skill level but great DIY!!

Отличная работа!

Very good, nice little project.

Good job on using endlers and not goldfish, many videos use goldfish or bettas in small tanks like these which I think is cruel but I think your choice of fish is AMAZING, good on you for that 👍🏾😁

@diyformyhome2265

4 жыл бұрын

Thank you so much!!!

Congratulations, very good work.

I'm extremely impressed by your creativity 👏. I have a pico tank reef tank and i want the smallest filter possible. I can buy one but I would love a custom one!.

Ahívá la ostia Patxi que gran invento joder ya tengo filtros caseros y prácticamente a coste cero 🤣🤣🤣🤣😘😘😘😘

うまく穴をあけてますねえ。ホットボンドはお風呂で使いましたが、時間が経つとはがれてきました。

自作オーバーフローですね。 面白い。

Wow great idea nice thanks for sharing

That's really cool, I really like it. 😎👍 Keep up the good work. 👍

Beautiful and well done invention.

Świetny pomysł 👍👏

Thats brilliant, thankyou

I will make this for my mini marine tank nice idea bro !! 😊

I pity the poor souls that will never know the joy of building something by themselves.

@katielyb

4 жыл бұрын

There's not that many people who know how to do electrical like this. Or that have the necessary tools with which to do so. I couldn't survive without my drill or glue gun nowadays though. 😁

@katielyb

4 жыл бұрын

But yes, I agree with you. The sense of accomplishment is like a drug but ten times better.

@DaneH64

3 жыл бұрын

lol im just here bc it was in the up next thing lmao

Great DIY 👍👍!

Сделано хорошо, главное идея ясна) а по желанию можно уже мудрить и красивей и практичней сделать кому надо))

Super good!!!👍👍👍

Brilliant idea

Would have used aquarium silicone or a GE #1 brand since that's safer fish!

@diyformyhome2265

4 жыл бұрын

Tks for your suggestions, when I finished it, I soaked it in water for a while, then added it to my aquarium. because I always want my fishes to be healthy

@snakeman567

4 жыл бұрын

Yeah that hot glue may not hold up in the long run. If it lets loose you will have leaks.

@WhatIsMisophonia

3 жыл бұрын

I don't care about companies, I care about experience. I used Red Devil brand 100% silicone (just make sure it doesn't have mold and mildew inhibitors) to seal all of my tanks, and they're doing fine for a couple of years now and not killing anything to the best of my experience. Just because someone recommends something over the internet/youtube because they had good experience with it doesn't mean it's the only product that will work.

@JasonFolk07

3 жыл бұрын

@@WhatIsMisophonia I have been doing this for like 12 or 13 years now I know what I am talking about when it comes to holding up in the long run I have and had tanks from when I was 13 or 14 years old that will still hold water to this day ahah maybe I am some stranger on KZread giving advice but it's his opinion to take it or leave it^ I had many more experienced people teach me a trick or two its does no hurt to know...

@WhatIsMisophonia

3 жыл бұрын

@@JasonFolk07 Ooook... My point is, unless you've tired anything else beyond what was recommended, your experience is still limited. I've heard from people who have used other brands for many years and it worked fine for them. I'm not saying your experience is invalid; I'm asking you not to invalidate the experience of others.

Awesome, great idea , nice creation bro.

@Ummmmmkay88

3 жыл бұрын

No

Kreatif bangettt 👍👍👍❤️👃

日本から世界に発信してるのですよね？結構な視聴数とイイねが、有りますね。凄い！

its so great video new subscribed stay safe have a great day

terima kasih sudah berbagi ilmu.. saya dari indonesia. salam kenal

Mantap hasil karyanya

Building your own filter is cool and all that, but the hot glue will dissolve over time.

@kerielwatson3197

4 жыл бұрын

Definitely use aquarium safe silicone

@tauncfester3022

4 жыл бұрын

No, it does not, I have well over 35 years working with hotglue and PE type plastics

Spektakuler 👍👍👍♥️

Add in a PWM and BOOM! DIY controllable DC filter!

@tauncfester3022

4 жыл бұрын

the voltage control on the bucking switch DC to DC voltage reducer is already making this "controllable". Yay! new technology!

Awesome skills my friend 👍

@manuelfigueroagarcia

4 жыл бұрын

Meteoritos hey leo lo terminen sobrevivir l oh up

Nice thks

Does anyone know what the fitting he is using to pass the pump wire through? It looks like the dry side has a nut that holds the wire in place, providing strain relief. Anyone know where I can get one in the US? I'm modifying this project into a nano tank chiller using a spare Ice Probe I have. There isn't any room for it in my tank so an external solution is the only choice.

Great design

love this little tank.thanks fore share

자작 여과기는 만들기 어렵던데 보고 따라하면 쉽게 만들겠네요 ㅋ

Very creative 😊

Главное что эта штука работает и поток можно регулировать) пускай и отвёрткой)))

I'm watching this from South Africa in KwaZulu-Natal

Have a great day cool KZreadr

I appreciate the DIY vid, thank you!!

@diyformyhome2265

4 жыл бұрын

Thanks you!

That so cool

Nice👍👌

Like that idea thanks 🇦🇺👍

Very interesting video 👍.

Beautyscape ..!

başarılı tebrikler :)

They always inspire me some creative way to do things.

@nickdawg8463

4 жыл бұрын

I dont know if that hot glue is safe for fish. But it it works it works.

@condorX2

4 жыл бұрын

Inspire = I just watch others do it xD

@Ummmmmkay88

3 жыл бұрын

And get electrocuted at the same time! WOW so fun!!!!

The flow must be reduced....the fish fry r finding it hard to swim.....nice effort

instant sub

Great idea and done well. I have a small AC pump that size, dont think i need to set the speed, should work? Thanks

@diyformyhome2265

4 жыл бұрын

My pump has used 3-9 Voltage DC /3w. I really do not want to use AC power to run pump. I mean it very dangerous when the electricity is leaking.

Nice job

Thanks you!

Very good.

Awesome job but very complicated work for a simple homemande aquariun system. Thank you for sending the vídeo.

Very very very nice video sir

@diyformyhome2265

4 жыл бұрын

Thank you so much!

I love this idea but not sure its economically viable I think a larger version may reap more reward I love the engineering well done

@diyformyhome2265

4 жыл бұрын

Thank for your comment

Thank you for sharing this video 🙂👍

shouldn't the water pump sit at the bottom on the container so it actually sucks the water down to the bottom where the media is? This set up looks like the water goes from the tank to the top of the container then back out. It doesn't seem like it pulls water through the media. Someone let me know if I'm wrong because I also plan on making one

@diyformyhome2265

3 жыл бұрын

The water will run from the fish tank to the bottom of the filter, And the filter will be filled by water, After that the water will be pushed back to the fish tank by the pump again I need cooling for the pump. Because of that, I put the pump at the bottom of the container.

Good idea 👍

Nice, good job

Nice video. New subscriber

i just notice the band aid on your finger😂✌🏻

👍 Salute 🙋‍♂️

Sangat inspiratif,, thx u boss ku

Хорошая идея! Спасибо)

Amazing 😉👍🙋🍃

Now i have an idea to turn my not so useful HOB into canister style

cantik banget ya..🐠🐠

Thanks for this tutorial I can adjust the size and connect my 3 gallon bettas tanks to it I have aguaescape bettas tanks if it works I don’t need to be buying the sponge filters from Amazon they take to much space what is the white plumbing your using ? Thanks for the video

not a main thing but you must be Vietnamese or at least having a Viet friend hahaha. btw, nice build!

Great video my friend!.Thanks !! #FishingBDGo

Awesome

Good mr

Nice 👍

amazing

That's complicated. I will just buy a mini filter lol

@jymaryangel

3 жыл бұрын

Same feel

@jayrcool8256

2 жыл бұрын

There's another method of that and its easy.

Amazing

Nice Job

Маладэц - Зёма ! Лайк за старания !

@diyformyhome2265

4 жыл бұрын

Tks U!!!

Pretty ingenious

Super nice

I'm a little confused as to how it was filled. The pump still pumps out water normally right? Not sucking the water out from reverse polarity?

Привет 👋, сделал супер 👍, молодец.

@maks586

4 жыл бұрын

а что за сетка показана на видео #2:53

@maks586

4 жыл бұрын

#6:07 надо делать такую штуку?

Nice

Nice and neatly DIY done for this beautiful aquarium. Can you please make this one for me please on order basis. 😬😅😂

@diyformyhome2265

4 жыл бұрын

I'm sorry, I only did it when I have free time.

@sarthakchawla03

4 жыл бұрын

@@diyformyhome2265 Its okay bro, i was just kidding!! 💐

❤❤❤ So good

Like this

Lol, that is a lot of work, i'll just buy cheap filter from Lazada or Shoppee..thanks for the tip.