Make a DIY Jockey Box! Bring your Homebrew to Events and keep it COLD!

Тәжірибелік нұсқаулар және стиль

*Hit that SUBSCRIBE button, you know you want to!!*
BUY ME A BEER 🍺 Doing so will help support the channel and allow me bring you even more brewing content! thanks and Cheers! 🍻 www.buymeacoffee.com/Cityscape
In this video I show you how to make your own jockey box to be able to serve your homebrew at events and make sure it stays cold. Below are the parts and dimensions you will need to make your own. Each item is for a single tap/line. If you want more taps, just multiple these amounts by the number of taps you want to build.
Parts:
Cooler (48 qt allows 4 taps) any brand works but want a flat front or back to mount tap handles:
amzn.to/42mtwnN
Standard Faucet with 3" Shank:
amzn.to/3LRSXGG
Ball Lock Quick Connects:
1 set: amzn.to/3TDnppG
2 sets: amzn.to/3J6Uy8V
Hose Clamps:
Standard screw (25 pack): amzn.to/3LRkp7p
Easy Turn (20 pack): amzn.to/36jVuYR
Vinyl Tubing (beer lines):
10 ft of 3/16 ID x 5/16 OD (Thinner line):
amzn.to/3pokZlv
5-6 feet (or 16 feet total if not using thinner line above) of 3/16 ID x 7/16 OD (Thicker/typical serving line):
amzn.to/3w7osWR
If using two different beer hose types, you will need 3/16 hose barb connectors:
amzn.to/42H3QBZ
CO2 3/8 ID Tubing:
amzn.to/3usEmJW
If having more than one keg connection, you will need 3/8 Barbed splitter/adaptors:
T style (two kegs):amzn.to/3puZKyB
X style (three kegs): amzn.to/3LVjpPy
note You will need both if doing 4 kegs/taps, or three T style to split four ways.
Tools:
Drill
1/2 inch drill bit
1 inch hole drill bit
Screwdriver
Scissors or utility knife to cut tubing
You can see all the exact equipment I use in my videos at my Amazon page here:
www.amazon.com/shop/cityscape...
Other DIY Videos:
Video on the Cold Crash Guardian:
• Cold Crashing a NEIPA/...
DIY wort immersion chiller:
• DIY Wort Chiller for H...
DIY Hop Spider:
• Make a DIY Hop Spider
DIY Mash Tun:
• How to Build a Mash Tu...
DIY Fermentation Chamber:
• How to Make a Fermenta...
Turn an Old Fridge into a Kegerator:
• Turn Your Old Fridge i...

Пікірлер: 21

  • @sjporr
    @sjporr Жыл бұрын

    I’ve built 2 of these. One has 2 taps in a chest cooler and the other is 1 tap on a igloo water cooler. They work great

  • @CityscapeBrewing

    @CityscapeBrewing

    Жыл бұрын

    💯🍻

  • @jeffreyweishaar6698
    @jeffreyweishaar66983 ай бұрын

    This is great man, thank you for being awesome !! Definitely subscribing!!!

  • @CityscapeBrewing

    @CityscapeBrewing

    3 ай бұрын

    Thanks 👍💯🍻

  • @ricktimm3227
    @ricktimm3227 Жыл бұрын

    Great idea and video

  • @CityscapeBrewing

    @CityscapeBrewing

    Жыл бұрын

    Thanks! 🍻

  • @paulywill
    @paulywill Жыл бұрын

    Thanks!

  • @paulywill

    @paulywill

    Жыл бұрын

    I thought I was going to have to spend a fortune for a single event!

  • @CityscapeBrewing

    @CityscapeBrewing

    Жыл бұрын

    Nope. I'm all about making stuff cheap, easy, and good! Haha. 🍻

  • @tuurd
    @tuurd5 ай бұрын

    great vid as usual. only thing i have to nitpick is having the serving lines ziptied in such tight coils. it would cool the beer that much quicker by having that much more surface area exposed to the cooling water.

  • @CityscapeBrewing

    @CityscapeBrewing

    5 ай бұрын

    I've done it both ways with spacers, and just zip tying them in coils... You'd be surprised how cold the beer gets even in the coils.. I couldn't tell the difference. With that said, I am using the smaller diameter line inside so it cools faster. But definitely a good point for others to consider! 🍻

  • @scottlouie1651
    @scottlouie16512 ай бұрын

    How does this have only 117 likes? So helpful! Thank you

  • @CityscapeBrewing

    @CityscapeBrewing

    2 ай бұрын

    Thanks man. 🍻

  • @AlbeeSoaring
    @AlbeeSoaring Жыл бұрын

    Ive never seen anyone use the plastic tubing for the cooling coils before. Most of the time Ive seen them be copper or stainless steel coils. Did you do this to save cost?

  • @CityscapeBrewing

    @CityscapeBrewing

    Жыл бұрын

    Yes and it works really well. I've made two of these and they save a ton of cost and cool just as well, if not better, with the thinner tubing I use in the video. They are also transparent so you can see if gunk or buildup needs to be cleaned up and you can change the lines for cheap if needed. 🍻

  • @curtpick628
    @curtpick628 Жыл бұрын

    How cold is the beer on the output, assuming that the keg is ambient temperature? Looks like a nice build, Dennis.

  • @CityscapeBrewing

    @CityscapeBrewing

    Жыл бұрын

    Thanks. The kegs actually sit in a 5 gallon bucket of ice water so they stay somewhat cold. The jockey box helps keep the beer cold as it is dispensing. I haven't checked how much it would cool room temp beer down just with the jockey box, but I'm guessing it would work pretty well as long as it wasn't outside in 80-90 degree heat.

  • @TheLoobis
    @TheLoobis3 ай бұрын

    how the hell do I run cleaner through the lines?

  • @CityscapeBrewing

    @CityscapeBrewing

    3 ай бұрын

    You can do this the same way you would beverage lines in your kegerator. Partially fill a keg with cleaner, like PBW or Oxiclean free, and hook up gas to the keg. Then run it through the lines and let it sit for 10-20 mins. Then do the same thing with sanitizer afterwards, partially fill the keg, hook to gas, and run that through the lines, but leave the sanitizer in the lines for storage. 🍻🤘

  • @sanbe729
    @sanbe729 Жыл бұрын

    I have one in my bedroom in a camping fridge freezer (brass monkey) , it is 12v and 240v . It means i always have cold beer on tap without having to cool kegs. Since i am flatting with others , i dont want to run a dedicated fridge for my beer due to power usage concerns. My 50ft coil holds 600ml of beer and chills within minutes, more than enough chilling power for my pints. It also uses an extension lid i brought so if i want to re convert it to original fridge/freezer i can. I can run it off my car 12v for festivals and other trips.

  • @CityscapeBrewing

    @CityscapeBrewing

    Жыл бұрын

    Nice. That's a good idea. Thanks for sharing. Cheers 🍻

Келесі