Thank you for the video very informative I will be subscribing🤘🇺🇸

@Tactical_chicano

3 жыл бұрын

Thanks and welcome

Great information man. This is what I needed. My barrel is 14mm positive so when I turn the die do I go clockwise on the thread?

@Tactical_chicano

2 жыл бұрын

If positive yes turn it clockwise

@CoreXFitness

2 жыл бұрын

@@Tactical_chicano thank you. Now if the thread on the tracer unit is ccw what direction does it turn on the positive thread?

@Tactical_chicano

2 жыл бұрын

@@CoreXFitness you cant use a negative with a positive thread

@Tactical_chicano

2 жыл бұрын

They're must me a male negative and female negative threads

@CoreXFitness

2 жыл бұрын

@@Tactical_chicano ok got it thanks.

Ok so I have a question. I have a threaded barrel and I live in a state that it needs to be pinned or welded so I can’t access them. My idea to save money and avoid going to a gun smith was to just file off the threads and then use some sort of locktite or sealant to put a thread cap on the end. My main question is if I sand down the threads will that affect my barrel or anything? I don’t want to damage anything but I don’t need the threads basically.

@Tactical_chicano

2 жыл бұрын

Is this for a real firearm or a replica for airsoft? What state do you live in?

How much would it cost for me to do this to my gun? My barrel has been stripped due to the orange tip removal, and was wondering what the best way to go about it would be because I don’t have the necessary tools. Thank you

@timowens7214

3 жыл бұрын

Vice, lower receiver block , tap and die set. I bought couple thread protectors for after until I get another muzzle device. I've acquired all these tools over time but for a decent tap and die set its about $40 or u can just get the specific tap and die for like $15-20

@Tactical_chicano

3 жыл бұрын

All these tools can be purchased in amazon just like I did, the links are the description if the video

@natemizrahi6271

3 жыл бұрын

Thank you!!

when you fix the threads for the first time then Did you have to use a lot of force or Did it go as easily when it appears in the video?

@Tactical_chicano

2 жыл бұрын

There is some resistance when you start to rethread since the threading is damaged but if you encounter a lot of resistance unwind it, clean out the shavings and continue the process

@r.a3209

2 жыл бұрын

@@Tactical_chicano thanks for the reply. i just wonder bc in my silencer reads 14x1.25 threads and when i tried to fix the threads with the righ size tool it felt really tight even though there is something to fix in the middle of the threads?

what if the threads broke off as a whole (mine broke off inside of the flash hider, which was actually pinned and welded it seems). should i replace the outer barrel or epoxy the threads/flashhider back on?

@Tactical_chicano

Жыл бұрын

I would buy a new barrel, the time and hassle is not worth it. Barrels are cheap depending on the model gun you have

@deluxezesty

Жыл бұрын

@@Tactical_chicano its an xm177 aeg and the barrels are kinda hard to find. mk18 barrel might work

@Tactical_chicano

Жыл бұрын

@Deluxe Zesty Scudbutter Surprise remove the barrel and check the shape where it looks in. Most Airsoft guns have the same type unless manufacturer made it proprietary i.e KWA or some GnG guns

@deluxezesty

Жыл бұрын

@@Tactical_chicano its the regular matrix kind, but the barrel length is hard to find (for it to be like it was)

So question, i bought a cyma ak alfa and the outer barrel came without threads. would a die work to make its own threads or is it only used to repair threads?

@Tactical_chicano

10 ай бұрын

Die can be used to create new threads but you'll need a different tool in order to create the correct dimeter for the die to fit in.

@Tactical_chicano

10 ай бұрын

this video should give you the concept on what to do, even if this video does it on a real rifle kzread.info/dash/bejne/ZJZ4o7KbmcWzkrg.html

@randomname4689

10 ай бұрын

@@Tactical_chicano thank you sir 🫡

14mm not 1/2x28 ?

@Aroberts1371USMC

8 ай бұрын

Wandering the same thing. Screwed up my LWRC barrel threads taking of the compensator. Damn thing

Wait can this work on a real gun?

@Tactical_chicano

2 жыл бұрын

Yea should a long as you have the proper dice to re-thread